Académique Documents
Professionnel Documents
Culture Documents
This chapter teaches you how best to write and draw on the MessagePad 2100. There
are several methods and tools you can use to enhance recognition, correct mistakes,
and manipulate text and drawings. Go through the chapter to find the best tools for
your needs.
If you want to go through a brief tutorial about writing, you can use the Handwriting
Instructor. To access this, tap Extras E to open the Extras Drawer, tap the folder tab
and in the list that appears, tap Setup. Then tap HW Instructor Ó.
About recognition
This section offers a general description of handwriting recognition used
in the MessagePad and discusses some of the factors that may affect how well it
recognizes your handwriting.
When you write on your MessagePad, you write in normal printed or cursive
characters, as well as numbers, punctuation, and gestures. Often you write English
words, but not always.
1
The MessagePad tries to detect when you are writing English words, abbreviations,
and common expressions. It uses a large dictionary to aid in recognizing these things
quickly and accurately. When you write things that are neither simple numbers nor
English words (such as initials, dates, telephone numbers, file names, or serial
numbers) your MessagePad tries to match the characters you write to the common
patterns of these entries. If no such pattern can be discerned, your MessagePad does
its best to recognize the characters individually.
Generally speaking, your MessagePad is somewhat better at recognizing poorly
formed characters if they are part of English words (or other items that are in
the MessagePad’s dictionary). When you’re writing things such as license plate
numbers, you’ll find that extra care in forming your characters neatly contributes to
improved accuracy.
Your MessagePad distinguishes characters and words in part by detecting pauses in
your writing. It’s a good idea when writing to complete each character without
pausing too long before it’s finished, and similarly to complete your words without
pausing in the middle.
Your MessagePad is also sensitive to the way your writing is spaced. In normal writing
or text there is a clear difference between the amount of space separating letters
within words and the amount of space separating words themselves. The more
distinct and consistent you make this difference when you write on your MessagePad,
the better recognition tends to be. A control in the Handwriting Recognition slip
allows you to let your MessagePad know whether your writing tends to be widely
spaced or more tightly crowded. Experimenting with this setting may result in
improved accuracy.
Generally, the MessagePad tends to deliver the best overall recognition accuracy if
you select Printing as your handwriting style. This means you must print using
separate letters only, taking care to lift the pen between characters when you write.
If you write in cursive style (always joining letters) or mix cursive and printed styles,
you should select Cursive as your handwriting style. Both styles are then recognized,
even when mixed, although overall accuracy may decrease somewhat.
2 Chapter 1
Selecting a handwriting recognition setting
In some areas of the MessagePad, such as the Notepad, you can choose a handwriting
recognition setting to help your MessagePad interpret what you are writing or drawing.
The Recognition button on the bottom left of the MessagePad screen controls the
way the MessagePad recognizes your writing and drawing. Tap the Recognition
button and a pop-up list appears.
Tap your choice and the picture in the Recognition button changes to the
new setting.
Choose Purpose
a Ink Text To take notes quickly and keep your handwriting as is in electronic ink.
S Shapes To draw and have the MessagePad smooth curves and straighten lines.
) Sketches To keep your drawings as is; the MessagePad does not smooth curves or
straighten lines.
i Preferences To modify preferences for the way your MessagePad recognizes and
works with text, draws shapes, and displays electronic ink.
The MessagePad uses different methods to recognize printing and cursive writing. It
is important that you choose one style and write that way consistently. When you
change your writing style, you must also change the style setting in the Handwriting
Recognition slip.
4 Chapter 1
The highest overall recognition accuracy is achieved when you print, using separate,
unconnected letters.
m Select Printing as your style when you often write information that is not whole
words or common abbreviations. If you select Printing, you must lift the pen
between characters so that characters are separated and easily distinguishable
from one another.
m Select Cursive as your style when you join some or all of the characters you write.
Word spacing
When you write, your MessagePad must decide which groups of pen strokes to
interpret as words, along with what words these strokes represent.
You can improve your MessagePad’s ability to distinguish words by writing your
characters somewhat close together and your words somewhat far apart. Use the
slider in the Handwriting Recognition slip to set the distance between words. This
helps your MessagePad recognize words more easily.
Tips on word spacing
m If your MessagePad tends to run your words or expressions together, try writing
them farther apart.
m If your MessagePad tends to break apart your words or expressions, try writing the
characters closer together.
m If you want to deliberately combine two separate words into one, write the second
word extremely close to the first word.
m If you want to separate a string of characters into two words, be sure to leave extra
space between the two expressions.
You can set additional preferences by using the Options button. Tap the Options
button and a list appears.
The options you see depend on which writing style you selected—Printing or Cursive.
Tap an option in the list and in the slip that appears, enter the appropriate
information. The various options are described below.
Text Editing Settings
Use this to set the scaling of ink text, to specify whether to insert words at the caret,
and to automatically add new words to your word list.
m Ink Text Scaling—Tap the diamond u and, in the list that appears, tap No Scaling,
75% Scaling, or 50% Scaling.
m Insert new words at caret—If this box is checked, you can tap the pen on the
screen to place the caret ^. Anything you write on the screen is then placed at
the caret. If the checkbox is not checked, your writing appears wherever you write
it on the screen.
m Add new words to Personal Word List—If you selected Cursive as your handwriting
style and this is checked, any words the MessagePad interprets that are not already
in a word list (such as someone’s last name) are automatically placed in your
personal word list.
6 Chapter 1
Handwriting Settings
This option only appears if you selected Cursive as your writing style. Use this to add
letter-by-letter recognition to the MessagePad and to indicate whether you want the
MessagePad to learn your handwriting.
This option only appears if you selected Cursive as your writing style. You use Letter
Shapes to help the MessagePad improve handwriting recognition by identifying letter
shapes you don’t use.
Your settings do not prevent the MessagePad from recognizing the letters if you write
them in other ways.
Tap a letter or
character to go to it.
Tap a letter form once to select it. Tap it again to see how it’s written (notice the
direction of the strokes). Then tap Often, Rarely, or Never to indicate how often you
write the letter this way. (If more than one form is boxed, your choice affects all the
forms in the box.)
8 Chapter 1
Fine Tuning
Use these settings to let the MessagePad know how fast to recognize and transform
your handwriting.
If you wish to discard all the Letter Styles preferences you’ve set and everything the
MessagePad has learned about your handwriting, tap Use Default Settings in the
Options list.
10 Chapter 1
Setting the styles for text and drawings
You can change the style and size of text and the thickness of lines and shapes. When
you make changes, it affects the selected items (if any) and everything you write or
draw subsequent to the change.
1 Select the text, line, or shape you want to change. (If you want to set styles before
you write or draw, make sure nothing is selected.)
Hold down the pen near the item until a heavy mark appears under the pen, and
draw the mark over or around the item.
m Style—Choose Plain, Bold, Italic, Outline or Underline (for Text and Ink Text).
m Pen—Choose a pen width of 1-, 2-, 3-, or 4-point size (for drawings and sketches).
7 When you finish making your selections, tap X to close the slip.
12 Chapter 1
^ Using the caret
You can insert a word or phrase at a specific place on the screen using the caret. If
you choose to enter text without a caret, the text is placed in the general area where
you wrote.
To use the caret, follow these steps:
1 Tap the Recognition button Ú and in the list that appears, tap i Preferences.
2 Tap Options and in the list that appears, tap Text Editing Settings.
3 Tap the checkbox next to “Insert new words at caret.”
4 Go back to the item where you want to insert text.
5 Tap the pen where you want the word(s) to go on the screen.
A caret appears where the words will be placed.
6 Write the new word or words anywhere on the screen. The text is placed at the caret.
To move a keyboard, hold the pen on the picture hanger on the keyboard slip and
drag it to where you want the keyboard on the screen.
If you want a different text keyboard arrangement, use the Locale preferences to
change the keyboard layout.
1 Tap Extras E to open the Extras Drawer.
2 Tap the folder tab and in the list that appears, tap Unfiled Icons. (If you filed Prefs in
another folder, tap that folder’s name.)
3 Tap Prefs π and, in the slip that appears, tap Locale ©.
4 Tap Keyboard, then tap the keyboard layout you want.
14 Chapter 1
Entering symbols and other special characters
If you have selected Cursive as your handwriting style, you must use the keyboard to
enter accent marks. Your MessagePad does not recognize handwritten accent marks
on cursive letters.
Display the typewriter keyboard on the screen. Then tap the Option key, or the
Option key and then the Shift key, to see the available special characters (such as
symbols, accent marks, and accented letters).
m Draw the zig-zag with sharp corners, making each segment about the same length.
m Don’t draw the zig-zag so it loops or crosses over itself.
m The zig-zag lines should go well above and below the word or drawing.
A single word.
A group of words.
A whole shape.
Part of a shape.
Selected text and drawings; start the zig-zag outside the selection to
avoid moving it (see “Selecting Text and Drawings” later in this chapter).
A single letter (make sure you scrub over the letter at least four times).
16 Chapter 1
Correcting a misinterpreted word
There are several ways you can correct words that the MessagePad has misinterpreted.
One letter corrections
If only one letter is wrong, write the correct letter over the incorrect one. Correct
only one letter at a time.
Scrubbing
You can scrub out the word to erase it and then rewrite the word. To scrub, draw
a zig-zag line over the word or phrase. Make sure the line goes back and forth at
least four strokes. For more information, see “Erasing Text and Drawings” earlier in
this chapter.
Keyboard button.
If you tap the Keyboard button _ in the list, the on-screen keyboard appears. Tap
out the word.
If you tap “Try letters,” the MessagePad uses letter-by-letter recognition instead of its
dictionary to interpret the word. It then displays its best guess. This option is useful if
you don’t have letter-by-letter recognition turned on and you write a word that is not
likely to be in the dictionary. It is also helpful if you write a word and the MessagePad
guesses a number, or if you write an unusual combination of letters and numbers that
isn’t recognized.
18 Chapter 1
Selecting text and drawings
To select an item, hold the pen near the item until a heavy mark appears under the
pen and the MessagePad makes a squeak. (If the pen sound effects in Prefs π or the
volume are turned off, you won’t hear the squeak.) Draw the mark over or around
the item.
To select words, draw the highlighting mark across them.
To select text on more than one line, draw the highlighting mark from the beginning
of the first word to the end of the last word.
To select several whole lines of text, draw the highlighting mark vertically through the
lines of text.
To select lines in a shape, draw the highlighting mark along the lines.
To select groups of text or drawings, circle them with the highlighting mark. The
MessagePad puts a box around the things you select.
To deselect an item, tap the pen anywhere outside the selection.
20 Chapter 1
Copying text or drawings
You can duplicate a drawing or words and phrases. First you must select them. Hold
the pen near the item until a heavy mark appears under the pen and draw the mark
over or around the item.
Then, copy the selected item by tapping twice inside the selection, keeping the pen
down on the second tap. Then move the pen to move the duplicate away. You can
also use this technique to copy items in the Clipboard.
22 Chapter 1
Modifying drawings
You can modify the size or shape of a drawing in several ways.
1 Select the drawing. Hold the pen on or near the drawing until a heavy mark appears
under the pen and draw the highlighting mark over or around the drawing.
2 Use the following techniques to modify the drawing:
m Hold the pen on the dot where the two line segments meet, then move the pen.
m Hold the pen on a corner or edge of the box and drag to stretch, shrink, or distort
the picture. Grab a side or corner if you want to stretch or shrink the drawing
horizontally or vertically.
To insert space in text, draw carets and lines as shown in the following table. The top
of the caret should line up with the baseline of the letters. Draw the caret in one
stroke; do not use a separate stroke for each side of the caret.
Inserts space for a word (the longer the line, the bigger the space).
Inserts space for several lines (the longer the vertical line, the bigger
the space).
24 Chapter 1
Adding punctuation
Sometimes punctuation marks can be misinterpreted by your MessagePad. You can
quickly add punctuation marks by using the caret or the on-screen keyboard.
To add punctuation marks using the caret:
1 Tap the pen where you want the punctuation mark to appear. A caret appears.
To change how a word is capitalized, select the word by holding the pen near the
item until a heavy mark appears under the pen (the MessagePad makes a squeak),
and draw the mark over or around the word. Then draw a vertical line over the word
as shown.
When you’re changing the initial capitalization of a word, make sure that there is no
space selected before the word. If there is, the first letter of the word does not change.
26 Chapter 1
Changing paragraph margins
1 Select the paragraph by drawing a selection box around it.
Hold the pen near the item until a heavy mark appears under the pen (the
MessagePad makes a squeak), and draw the mark over or around the paragraph.
Note: Selecting text by drawing a line through it does not create a selection box. To
change paragraph margins, you must select by drawing around the paragraph.
2 Hold the pen on the left or right edge of the box and move it.
You can indent a paragraph after it’s written. (Make sure you’ve selected “Insert new
words at caret” in the Text Editing Settings within the Handwriting Recognition slip.
(See “Setting Your Handwriting Recognition Preferences” earlier in this chapter.) Tap
the pen at the beginning of the sentence. The caret appears. Tap the Keyboard
button _ (make sure the Typewriter keyboard is selected), then tap the tab key on
the keyboard.
2 Tap the Dictionary button d in the lower-left corner of the on-screen keyboard.
The word list appears.
28 Chapter 1
Viewing the word list
You can review the words you’ve added to the word list, so that you can add more
words or remove words you no longer use.
To review the word list, tap a letter along the bottom of the list to go to that letter in
the list. You can also tap the up and down arrows to go through the list.
You should add words that you are likely to use often, and remove words that
you don’t use often. A word list of more than a thousand words or so may cause
memory problems.
The capitalization you use when you add a word helps determines how it will be
capitalized when the MessagePad recognizes the word the next time you write it. The
MessagePad first tries to discern the capitalization you’ve used from your
handwriting. If your capitalization isn’t clearly recognized, the MessagePad uses the
preference for capitalization in the word list.
To add a word to the list, tap it out on the keyboard, then tap Add.
m If the word is not already in the MessagePad’s list, it is added to your personal
word list.
m If the word is in the MessagePad’s list, a message appears telling you that the word
is already in the list. (It may be that you typed a capitalized or lowercase version of
the word.) Tap Yes to add the word or No not to add it.
To remove a word from the list, go to it in the list and tap it. Then tap Remove. The
word is automatically deleted.
If you select Cursive as your handwriting style, words you write that are not in the
MessagePad’s dictionary are placed in the Recently Written Words list. When there are
many words in this list, a blinking star may appear at the top of the screen each time
you write another word that’s not in the dictionary.
The star is a reminder to evaluate the list and select the words you want to add to
your personal word list.
To see the list of recently written words, tap the Keyboard button _ and then tap
the Dictionary button d.
To add a word to your personal word list, tap the word and tap Add. To close the slip,
tap X.
30 Chapter 1
Teaching the MessagePad 2100 to recognize abbreviations
You can write an abbreviation or shortened form of a word and have the MessagePad
recognize it as the expanded word. For instance, if you write the word “example” a
lot, you can choose to write “ex” and have the MessagePad automatically recognize
this as “example.” You can also use this method to interpret and expand a word with
accented characters.
You can expand a word in two ways. You can add it to your word list and expand it at
the same time. Or, you can expand a word or expression that is already in your list.
To expand a word that is not in your list, you first add the expression, then expand it.
1 Tap the Keyboard button _ and then tap the Dictionary button d.
Your personal word list appears.
2 Tap the word or expression you want to expand on the keyboard, then tap Add.
3 When a slip appears asking if you really want to add the word, tap Yes.
5 Tap the expanded word out on the keyboard, then tap Expand.
The shortened word and the expanded word appear together in your word list.
32 Chapter 1
To expand a word that is already in your list:
1 Tap the Keyboard button _, then tap the Dictionary button d.
Your personal word list appears.
2 Go to the word in the list, tap it, then tap Expand.
The shortened word and the expanded word appear together in your word list.
34 Chapter 1
2 Using the Notepad
The Notepad is like a long roll of paper. It always contains at least one item. You can
use it to write and draw notes and other items.
The Notepad is initially set as the default application, or backdrop, that you see when
you close all other applications. When the Notepad is the backdrop, it is always open,
though it may be hidden underneath other things. To see the Notepad, you must
close everything else by tapping all the X’s you see.
35
To create a new item:
1 Tap all X’s to return to the Notepad.
If you’ve changed the backdrop to an application other than the Notepad, tap
Extras E to open the Extras Drawer, then tap Notes.
2 Tap New.
A list appears showing the different types of items, or stationery, you can create.
36 Chapter 2
Creating a note
Tap the Recognition button Ú and from the list that appears, tap your choice—Text,
Ink Text, Shapes, or Sketches.
If you are writing, tap the pen where you want your words to appear on the screen.
A caret appears. You can now write anywhere on the screen and the information is
placed at the caret. If you are drawing, your drawings appear wherever you draw
them on the screen.
This is an example
of a note.
You can use the checklist stationery to create a list of entries that you can check off as
you complete them. The outline is similar to the checklist, but you don’t have the
ability to check off entries.
When you create a new checklist or outline, a small circle appears on the left. This is
where your first entry is placed. The checklist also includes a checkbox to the left of
the circle.
1 Enter your first entry by writing with the pen, or double-tap anywhere on the screen
to use the on-screen keyboard to tap out the entry.
38 Chapter 2
The information is placed at the caret, next to the open circle.
This is an example
of a checklist.
This is an example
of an outline.
You can create up to eight levels in the checklist and outline stationery.
To check off entries completed, tap the checkbox next to an entry. When you check
an entry, all its subentries are also checked off.
40 Chapter 2
Moving entries to different levels
You can rearrange entries and move an entry to a higher or lower level. Tap the open
circle next to the entry and drag it where you want it to go—to the right, left, up,
or down.
42 Chapter 2
Creating a recording
You can record messages and sounds in a note using a recording note and the
MessagePad’s built-in microphone. You can also play back recorded messages,
listening to them over the MessagePad speaker. You’ll find recording notes is a handy
way to quickly dictate an idea or record aural information rather than write it down.
1 Tap New.
A list appears showing the types of stationery you can use.
2 Tap Recording.
A note appears with recording controls.
You can change the way the MessagePad makes recordings by setting
recording preferences.
You can record sounds and messages using either the MessagePad microphone or a
cable connected to the Newton InterConnect port and a sound input device.
You can also change the quality of recording by selecting how much information is
recorded per second. For example, for a voice message that might not require the
highest-quality sound, you can record at a low rate of information per second; for recording
sounds or music, you might record at a higher rate for increased clarity and fidelity.
You can also adjust the recording volume to better pick up quiet or loud sounds.
To set your recording preferences:
1 Tap Extras E.
2 Tap Prefs π in the Extras Drawer.
3 Tap Recording.
The Recording preferences slip appears.
m To select your recording method, tap “Recording source” and select either
Microphone or Line-in (when using a cable connected to your Newton
InterConnect port).
m To change the recording quality, tap “Recording quality” and select your choice of
recording rate: Voice or Music.
m To change the recording volume, move the “Recording volume” slider to set the
desired volume.
4 Close the Recording preferences slip.
5 Close the Prefs slip.
44 Chapter 2
Viewing items in the Notepad
To see other items, tap the up and down arrows. All items in the Notepad are sorted
by the date and time they were created. Tap up to see older notes; tap down to see
newer ones.
m Title of item
If you haven’t named the item, this shows the date and time the item was created.
To change the title, scrub out the day and date and then write the title. You can
change a title at any time
46 Chapter 2
m Type of item (note, checklist, outline, or recording)
m Time and date the item was created
m Size of the item in bytes
m Where the item is stored (internally or on a storage card)
3 When you are finished viewing the slip, tap X to close it.
3 Tap the checkbox if you want to store new items in the internal memory of
your MessagePad.
This preference overrides any settings on a storage card.
4 Tap X to close the slip.
48 Chapter 2
3 Using the Name File
You can use the Name File as an address book to store information about people,
companies, and groups. The Name File contains name cards that you create. Each card
has information such as name, address, telephone numbers, electronic mail addresses,
and notes. You can also create your own field labels for special information.
Tap Names ‰ to go to the Name File. Tap it again to put away the Name File. You
can also tap X in the lower-right corner of the Name File to put it away.
This is a sample
name card.
49
Creating a new name card for a person or company
You can create a name card for a person or a company. To do this, follow these steps:
1 Tap Names ‰ to open the Name File.
2 Tap New.
3 In the list that appears, tap Person N or Company Ç.
4 In the slip that appears, enter the appropriate information.
50 Chapter 3
This is an example of the slip
you see for a company.
2 In the list that appears, tap the type of information you want to add. For each type of
card you can add the following types of information:
m Person—company, address, phone, e-mail address, pager number, dates, affiliate,
and notes
m Company—affiliate, address, phone, e-mail, and notes
m Group—notes
You can also create custom fields of information for each type of card. See “Creating
Custom Field Labels,” below.
If you enter a birthday or anniversary in the Dates field for a person, it is
automatically entered as an annual event in the Date Book.
3 In the slip that appears, enter the appropriate information.
4 When you are finished, tap X to close the slip.
To see the information, tap Show and in the list that appears, tap All Info.
52 Chapter 3
Creating custom field labels
You can create your own field labels for name cards if you want to enter information that
is not in the Add pop-up list. For example, you might want to add a Department field.
1 Go to the card and tap Add.
2 In the list that appears, tap Custom.
A slip appears for you to enter the name of the field.
3 Tap the pen on a blank line.
The caret appears.
4 Enter the name of the new field.
The field labels you create do not appear in the Card view. To see custom field
information, tap Show and, in the list that appears, tap All Info.
To enter custom field information in another card
Once you create a custom field label, you can use that field in any name card. To do
this, go to a name card and tap Add. In the list that appears, tap the custom field
label. Enter the appropriate information in the slip and tap X when you are finished.
54 Chapter 3
Creating a card for a group address
You can create a group address to conveniently send faxes or electronic mail
messages to multiple individuals or companies.
1 Tap New.
2 In the list that appears, tap Group G.
3 In the slip that appears, enter the appropriate information.
Go to the group address card and tap the group name or the Picture button next to it.
The group address slip appears. Make any changes and when you are finished, tap X
to close the slip.
To see other cards in the folder, tap the up and down arrows to move through
the list or tap the lettered tabs.
56 Chapter 3
Sorting name cards
You can sort name cards several ways:
m Default Order–last name for a person and name of the company or group
m First Name
m Company Name
m Card Category–person, company, and group
m Zip Code
Note: Cards that don’t include information in the field you are sorting by are placed
at the beginning of the sort order.
To sort cards, follow these steps:
1 Tap the Information button i and in the list that appears, tap Prefs.
The Names Preferences slip appears.
2 Under “Sort by,” tap how you want to sort the cards.
3 Tap X to close the slip.
A message appears saying that the sort order is being changed.
You can enter information in ink text and have the MessagePad sort these cards by a
letter or number.
1 Tap New and in the list that appears, tap your choice.
A new card slip appears.
2 Tap the Recognition button and in the list that appears, tap Ink Text :.
3 Write the appropriate information. Then tap X to close the slip.
A keypad appears.
4 Tap the letter or number that you want to sort the card by. Then tap X to close
the slip.
If you don’t choose a letter or number, the card is placed at the beginning of the
sort order.
58 Chapter 3
Sorting companies with information in the birthday field
Company entries created using an earlier version of the Newton operating system
that have information in the birthday field may not be sorted correctly.
In the Newton 2.1 operating system, birthday information is displayed in the Last
name or Untitled Person field. When entries are sorted by the information in the
Last name field, entries with birthday information may be placed at the beginning of
the alphabet.
This may occur when you
m Use data and information from a storage card that has been converted to the
Newton 2.1 operating system.
m Beam or mail a company name card from a Newton device that uses an earlier
version of the Newton operating system to your MessagePad, and then select “Put
Away” in the InOut Box.
60 Chapter 3
Adding and viewing notes
You can add a note to a name card and view notes attached to cards.
To add a note
1 Go to the card.
2 Tap Add and in the list that appears, tap Notes.
3 In the slip that appears, enter your information.
Tap the Recognition button Ú in the lower-left corner if you want to change the
recognition setting for the note. Tap the scroll arrows ≈ on the right side to move
down in the note if you need more space.
1 Go to the card.
2 Tap Show and in the list that appears, tap All Info.
The note text appears in quotation marks if it was written as text. If it was written
using a combination of text, ink text, shapes, or sketches you see the designation “[notes].”
3 Tap the note shown on the screen.
The note slip appears. Tap the scroll arrows ≈ to move up and down in the note.
You can find text in a note attached to a name card by tapping Find. For more
information, see Chapter 6, “Organizing and Finding Information.”
62 Chapter 3
4 Enter or change any information.
m Under “Sort by” tap how you want the MessagePad to sort your name cards.
Only name cards with information in the selected field appear. Cards that don’t
include information in the field you are sorting by are placed at the beginning of
the sort order.
m Tap the “Send notes data with names” checkbox to beam any notes with
name cards.
m Tap the “Always store new names internally” checkbox if you want to store new
items in the internal memory of your MessagePad.
This preference overrides any settings on a storage card.
5 Tap X to close the slip.
If you changed the sorting preference, you now see the cards in the new sort order.
This is a preview
of a single card.
64 Chapter 3
Faxing, beaming, mailing, duplicating,
or deleting cards
1 Go to the card.
To select more than one name card, tap the Overview button Ω and in the list that
appears, tap the checkbox next to each card you want to route.
2 Tap the Routing button µ.
3 In the list that appears, tap your choice.
If you want to send the notes associated with Names information, open the
Preferences slip for Names and select the “Send notes data with names” checkbox.
For more information about sending information, see Chapter 7, “Routing Information.”
s Warning Do not connect your modem to a digital telephone line. It may damage
the modem. s
The MessagePad can look up phone numbers in the Name File and dial them for you,
using the speaker or an optional modem. When you enter phone numbers, always
include the area code. Based on the information in Time Zones and Owner Info, your
MessagePad decides whether to dial an area code and whether to include prefixes
and calling card numbers.
For more information, see Chapter 5, “Managing the MessagePad 2100.”
Important The MessagePad’s dialing feature does not work with all phones. Some
phones, such as PBX phones, do not recognize the tones from MessagePad’s speaker.
If you want to use a modem to dial, make sure both the modem and the telephone
you’re using are connected to the same line. See the modem manual for details.
66 Chapter 3
3 Tap Call.
If you’re dialing through the speaker, position the MessagePad’s speaker at the center
of the telephone mouthpiece.
Telephone
mouthpiece
Speaker
The number is dialed and a message appears telling you the MessagePad is dialing.
Note: If you tapped Log in the Call slip, the call is automatically logged in the Calls
application in the Extras Drawer and you see a different screen after you tap Call. For
more information, see “Calls” in Part 2, “Using the Built-in Applications” in Chapter 5,
“Managing the MessagePad 2100.”
69
Summary of the Calendar
70 Chapter 4
Scheduling meetings and events
You can create a variety of items in the calendar, including single, weekly, and other
repeating meetings, along with single, multiday, and annual events. Meetings are time
based and events are date based. You can also add notes to calendar items and set
alarms for them.
Scheduling a meeting
You can schedule a single, one-time meeting or a repeating meeting. (To schedule a
weekly meeting, see the next section.)
1 Tap Dates ¬.
2 Tap New.
3 From the list that appears, tap Meeting M.
4 Enter the information in the slip that appears.
Tap an arrow to
change the month.
72 Chapter 4
m Location—tells where the meeting is being held.
m Alarm—sets an alarm and a message to appear a specified amount of time before
the meeting.
To choose the type of sound and volume for the alarm, go to Prefs π in the Extras
Drawer and tap Alarm ≥. Then go to Sound preferences and turn on “Action sound
effects.” For more information, see “Prefs” in Part 2 of Chapter 5, “Managing the
MessagePad 2100.”
m Repeat—tells how often the meeting repeats, if necessary.
5 When you are finished entering information, tap X to close the slip.
74 Chapter 4
You can include the following information:
m Title—displays the name of the meeting. (You’ll see a diamond next to this if you
have created other weekly meetings.)
m Time—lists the time and length of the meeting.
m Invitees—shows who is attending the meeting.
Tap an arrow to
change the month.
76 Chapter 4
This is an example of a Weekly Meeting slip that has been filled out.
5 When you are finished entering information, tap X to close the slip.
e Scheduling an event
You can schedule an event on a particular day.
1 Tap Dates ¬.
2 Tap New.
3 From the list that appears, tap Event e.
4 Enter the information in the slip that appears.
Write the title. To enter other information, tap the diamond next to an item. You can
include the following information:
m Title—displays the name of the event. (You’ll see a diamond here if you have
created other events.)
Tap an arrow to
change the month.
To choose the type of sound and volume for the alarm, go to Prefs π in the Extras
Drawer and tap Alarm ≥. Then go to Sound preferences and turn on “Action sound
effects.” For more information, see “Prefs” in Part 2 of Chapter 5, “Managing the
MessagePad 2100.”
m Repeat—tells how often the event repeats, if necessary.
78 Chapter 4
m Add Notes—allows you to add additional information about the event.
Once you’ve added information in a note, to add more information or edit existing
information while the meeting slip is still open, tap Edit Notes in the event slip. Scrub
any information you want to delete.
This is an example of an event slip that has been filled out.
5 When you are finished entering information, tap X to close the slip.
Tap an arrow to
change the month.
80 Chapter 4
This is an example of a Multi-Day Event slip that has been filled out.
5 When you are finished entering information, tap X to close the slip.
Tap an arrow to
change the month.
82 Chapter 4
This is an example of an Annual Event slip that has been filled out.
5 When you are finished entering information, tap X to close the slip.
5 Tap X to close the notes slip, then tap X to close the meeting slip.
When an alarm goes off, a message appears on the MessagePad screen. You can also
choose to have the MessagePad play a sound when the alarm goes off.
To set the type of sound and volume for an alarm:
1 Tap Extras E, then tap the folder tab and tap Unfiled Icons.
2 Tap Prefs π, then tap Alarm ≥.
In the slip that appears, tap your preferences.
3 Tap X to close the slip.
4 Tap Sound ˆ and in the slip that appears, tap the checkbox next to “Action sound effects.”
This turns on sound effects so you can hear the alarm.
For more information, see “Prefs” in Part 2 of Chapter 5, “Managing the
MessagePad 2100.”
84 Chapter 4
Scheduling overlapping meetings
You can set two meetings for overlapping times by placing them side by side.
Schedule the first meeting, then do one of the following:
m Tap New and in the list that appears, tap the type of meeting you want. In the
meeting slip that appears, enter the appropriate information, and then tap X to
close the slip. The new meeting appears in the middle of the screen at the
specified time.
m Draw a vertical line near the middle of the calendar, specifying the time of the
second meeting. A marker and Picture button for the second meeting appear.
Write the title next to the new Picture button or tap the Picture button and enter
the appropriate information in the slip that appears, then tap X to close the slip.
m Schedule the second meeting at a different time, then move it. For more
information, see “Moving Items in the Date Book,” later in this chapter.
You use the monthly calendar in the top-right corner of the Date Book to go quickly
through the Date Book.
Tap the month and a list appears;
you can choose to see the last
3 months, next 9 months, or today.
Tap the arrows to move to the next or
previous month.
86 Chapter 4
1 Tap Dates ¬ to open the Date Book.
2 Tap Show and in the list that appears, tap your choice.
The default view is the current day. If you choose a week view, it shows the week
containing the current day.
m Tap Day to view a particular day.
m Tap Month to see one month at a time. The dark bands represent meetings and
events and the flags represent events.
To go to a particular date in the month, tap the day in either the large month view
or the minicalendar in the upper-right corner.
88 Chapter 4
To go to another month, you can
m Tap the name of the month and, from the list that appears, tap your choice.
m Tap the arrows next to the name of the month.
m Tap the up and down arrows next to the Overview button Ω.
90 Chapter 4
m Tap Day’s Agenda to see meetings, events, and to-do tasks for the day you are
viewing. Tap the Picture button for an item to see more information about it.
m Multiple meetings, events, and to-do tasks—If you have four or more meetings,
events, or tasks in one day and you want to see them all, tap Show and in the list
that appears, tap Day’s Agenda. Tap the Overview button Ω.
92 Chapter 4
5 From the list that appears, tap Duplicate.
A copy of the slip appears.
Another way to do this is to tap the Picture button for the meeting, tap Time, and in
the slip that appears, tap the new time.
94 Chapter 4
Moving a meeting to another date
To move a meeting or event to a different date, tap the Picture button for the
meeting, tap Dates, and in the slip that appears, tap the new date.
You can also hold the pen on the Picture button for the meeting or event and drag it
all the way to the right or left edge of the screen. A box appears. Tap the date on the
calendar that you want to move the meeting to. Hold the pen on the box and move it
to the time you want on the selected day.
If you want to move a meeting within the same week, tap Show, then tap Week. Tap
the Picture button for the meeting and drag it to the new date.
96 Chapter 4
Creating a To Do Task
1 Tap Dates ¬.
2 Tap New.
3 In the list that appears, tap To Do Task.
5 When you are finished entering information, tap X to close the slip.
98 Chapter 4
Viewing the To Do List
1 Tap Dates ¬.
2 Tap Show.
3 In the list that appears, tap To Do List.
4 To see more information about a specific task, tap the Picture button next to the checkbox.
Your MessagePad automatically turns itself on at 3:00 A.M. every morning and moves
unfinished tasks to the next day. The MessagePad then turns itself off.
Tap the Picture button of a to-do task and drag it to the level of priority you want.
If you move the task above a higher-priority item, it becomes a higher priority. If you
move the task below a lower-priority item, it becomes a lower priority.
1 Tap Dates ¬.
2 Tap Show.
3 In the list that appears, tap To Do List.
4 Tap the checkbox next to any items you have finished.
Completed tasks
have a checkmark
in the box and are
placed at the bottom
of the to-do list.
1 Tap Dates ¬.
2 Tap Show.
3 In the list that appears, tap To Do List.
4 Tap the Picture button next to the checkbox of the item you want to delete.
5 Tap the Routing button µ.
6 Tap Delete.
100 Chapter 4
Duplicating a to-do item
1 Tap Dates ¬.
2 Go to a specific date.
3 Tap Show.
4 In the list that appears, tap To Do List.
5 Tap the Picture button next to the checkbox of the item you want to duplicate.
6 Tap the Routing button µ.
7 Tap Duplicate.
A copy of the task appears in the list. You can tap its Picture button to change
any information.
102 Chapter 4
Setting preferences for the Date Book
1 Tap Dates ¬.
2 Tap the Information button ;.
3 In the list that appears, tap Prefs.
The Dates Preferences slip appears.
Tap these checkboxes Tap these diamonds to set how much time
to store new in advance you want an alarm to go off.
information in the
internal memory
of the MessagePad
regardless of whether Tap one of these buttons to set
a storage card the first day of the week.
is inserted.
To set an alarm time other than those shown, tap Other and enter the number
of days.
104 Chapter 4
5 Managing the MessagePad 2100
This chapter contains information about the MessagePad and is divided into two parts:
Part 1: Managing the Extras Drawer
Part 2: Using the built-in applications
Use the first part of this chapter to learn how to manage the Extras Drawer and the
items in it.
Use the second part of this chapter to learn how to use the applications that come
with your MessagePad.
105
Part 1: Managing the Extras Drawer
The Extras Drawer contains icons you can tap to go to different areas of your
MessagePad, other than the Name File, Date Book, and Notepad. If you install more
applications, either internally or on a storage card, their icons may appear in the
Extras Drawer.
To open the Extras Drawer, tap Extras E. Tap the icon again to close the Extras
Drawer. You can also tap X to close the Extras Drawer.
You can also manage the information and applications in the Extras Drawer. As in
many areas of the MessagePad, the Extras Drawer is organized by folders.
106 Chapter 5
The following folders are present when you first receive your MessagePad:
m Unfiled Icons—contains many built-in applications, such as the InOut Box, Calls,
Calculator, Formulas, Time Zones, Connection, Card, Styles, Prefs, Owner Info,
and Clock.
m Setup—contains Setup, Newton Tour, HW Instructor, and Writing Practice.
m Help—includes the on-screen help application for the Newton operating system
(help files from other applications you install are also located here).
m Extensions—contains fonts, system extensions, and some applications.
m Storage—contains data from all of your applications.
You can create new folders and edit existing folder names. For more information, see
Chapter 6, “Organizing and Finding Information.”
m To delete items in storage for the application, tap Delete. A warning message
appears, asking if you want to delete all the items. Tap OK.
m To file the items into a folder in the internal memory or on a storage card, tap the
Folder button F. In the slip that appears, select the appropriate information, then
tap File. A message appears asking if you want to file the information. Tap OK.
4 When you are finished viewing the slip, tap X to close it.
108 Chapter 5
Checking battery status, setting contrast
and volume
To check the amount of power left in your batteries, change the screen contrast, or
volume of sound, tap Extras ´ to open the Extras Drawer.
m Look at the battery gauge in the lower-right corner of the Extras Drawer. This
indicates how much power is left.
m To change the screen contrast, hold the pen on the contrast slider and move it
right or left.
Note: The contrast of your MessagePad screen may vary slightly depending upon
the surrounding temperature.
m To change the volume, hold the pen on the volume slider and move it right for
higher volume or left for lower volume.
110 Chapter 5
Making any other application the backdrop
You can make any application in the Extras Drawer the backdrop.
1 Tap Extras E to open the Extras Drawer.
2 Tap the folder tab, then tap the name of the folder that contains the application you
want as the backdrop.
3 Hold the pen on or near the icon until a heavy mark appears under the pen, then
draw the highlighting mark over or around the icon to select it.
Calls is selected.
The overview shows the amount of memory used for each installed application and
where applications are stored (card or internal memory). To file or route applications
in the list, tap the checkbox next to each application, then tap the Folder button F
or the Routing button µ.
Note: Built-in applications, such as the the Names storage icon ¨, can’t be routed.
To go back to the icon view, tap the Overview button Ω again.
112 Chapter 5
Selecting and moving icons
To select an icon, hold the pen on or near the item until a heavy mark appears under
the pen, and draw the mark over or around the icon. The icon is selected.
To select several icons at once, draw the mark over or around all the icons you want
to select. To move an icon, select it, then hold the pen on the selection and drag the
icon where you want to place it. You can also drag items into and out of the button
bar to customize it.
Deleting icons
You can delete any type of icon, except those that represent built-in applications or
data. To delete an icon, do one of the following:
m Scrub out the icon you want to delete.
m Select the icon, tap the Routing button µ and in the list that appears, tap Delete.
A message appears asking if you really want to delete it. Tap OK.
m Go to the folder in the Extras Drawer that contains the icon. Tap the Overview
button Ω and tap the checkbox next to each icon you want to delete. Tap the
Routing button µ. In the list that appears, tap Delete. A message appears asking
if you really want to delete it. Tap OK.
If you receive an application that was beamed to you from another Newton device,
you can store it in the Extras Drawer.
1 Tap Extras E to open the Extras Drawer, tap the folder tab, then tap Unfiled Icons
(if you filed the InOut Box in another folder, tap the name of the folder).
2 Tap InOut Box I. Tap the In Box button, if necessary.
3 Tap the checkbox next to the beamed icon.
m To file the item in a folder in the In Box, tap the Folder button F. In the slip that
appears, tap the name of the folder, then tap File.
m To create a log entry in the In Box, tap the Tag button t, then tap Log.
m To file the item in the Unfiled Icons folder in the Extras Drawer, tap the Tag
button, then tap Put Away.
114 Chapter 5
Sending icons by electronic mail
You can send applications to someone by electronic mail. You cannot e-mail icons of
built-in or copy-protected applications.
1 Tap Extras E to open the Extras Drawer.
2 Tap the folder tab, then tap the name of the folder that contains the icon you want
to mail.
3 Select the icon or icons.
4 Tap the Routing button µ and in the list that appears, tap Mail.
A mail slip appears.
5 Enter the appropriate information.
6 Tap Mail.
B Card For choosing what information to store on a storage card and for backing
up and restoring information.
C Clock For setting the time and date, a daily alarm, and a timer.
I InOut Box For receiving electronic mail, beamed information, and other items, and
for storing items waiting to be printed or sent as faxes, beamed
information, and electronic mail.
z Time Zones For setting your location and determining times around the world.
116 Chapter 5
c Calculator
You use the Calculator to perform various calculations. You can also copy information
from the Calculator to another area.
Tap the up and down arrows to see more calculations. You can scroll up to 30 lines.
To copy calculations, select the information, then move it to the edge of the screen
or to whatever is behind the calculator (such as the Notepad or the Date Book).
You cannot copy numbers or calculations from other applications into the Calculator.
Note: If you divide by certain values, such as zero, you hear a sound to let you know
that this calculation is impossible.
Q Calls
You use Calls to keep track of your telephone calls and to place calls. If you want to
use a modem to place the call, make sure both the modem and the telephone are
connected to the same line. See the documentation that came with your modem for
more information.
1 Tap New and in the slip that appears, enter the appropriate information.
You can tap a diamond u to enter the name or date. If you don’t specify a time and
date, the MessagePad uses the current time and date.
118 Chapter 5
2 Tap Place Call.
A slip appears.
3 Tap Using and in the list that appears, tap one of the following:
m Modem—if you’re using a modem to dial the number.
m Speaker—to have your MessagePad’s speaker dial the phone number.
m Telephone—to dial the phone number manually.
4 If you need to dial a prefix or use a credit-card number to make the call, tap Assist
and in the slip that appears, enter the necessary information. Then tap X to close
the slip.
6 When you are finished, tap Hang Up, and in the list that appears, tap a choice.
The end time of the call is then recorded in the log, along with any information you’ve
written. Your choice appears under the entry, along with the duration of the call.
7 If this call was made to someone you would like to add to your Name File, tap the
Add to Names button K.
8 When a message appears asking if you want to add this new name, tap Yes.
120 Chapter 5
Viewing calls
To view calls in a particular folder, tap the folder tab and in the list that appears, tap
the name of the folder you want to see.
To go through the calls, tap the up and down arrows. To see a list of calls, tap the
Overview button Ω. To view a particular call, tap its Picture button or title.
Deleting calls
To delete a call, go to it and tap the Routing button µ. In the list that appears, tap
Delete. To delete more than one call, tap the Overview button Ω, then tap the
checkbox next to each call you want to delete. Tap the Routing button µ and in the
list that appears, tap Delete. A message appears asking if you want to delete all
selected items. Tap OK.
You can file log entries in Calls into existing folders or ones that you create. To file an
entry, go to it and tap the Folder button F. In the slip that appears, enter the
appropriate information, then tap File.
To file multiple entries at one time, tap the Overview button Ω, then tap the
checkbox next to each entry you want to file. Tap the Folder button F and in the
slip that appears, enter the appropriate information, then tap File.
Tap the Information button ; and in the list that appears, tap Prefs. Enter the
appropriate information, then tap X to close the slip.
B Card
You tap Card to get information on a storage card that is inserted in your
MessagePad. You also use this to back up, restore, and erase information on the card.
For more information, see Chapter 10, “Backing Up and Restoring Information.”
122 Chapter 5
C Clock
You use the Clock application to set a daily alarm and minute timer, change the time
and date, and set other clock options. You can also access the Clock by tapping the
time and date in the upper-left corner of the Notepad.
1 Tap Set.
2 In the list that appears, tap your choice.
A slip appears.
3 Enter the appropriate information.
m Daily Alarm
Note: The daily alarm sound is a digital alarm and can’t be changed.
When the daily alarm goes off, the Clock appears and you hear the digital alarm
sound. You hear the sound for approximately one minute, or until you tap X to
close the Clock.
After the set number of minutes has elapsed, the timer sounds and a message
appears. If you want the timer to go off again, tap Snooze and, in the list that
appears, tap the number of minutes. Tap X to close the slip.
m Time/Date
Set the time, month, and year, then tap X to close the slip.
Tap month and, in the
list that appears, tap a month.
m Options
Set the type of clock you want, then tap X to close the slip.
124 Chapter 5
k Dock
You use Dock to make connections to computers and to install packages from a
computer. You can use serial, modem, or AppleTalk connections.
Note: AppleTalk is not available for the Microsoft Windows operating system.
For more information on connecting to a computer, see your connection
software documentation.
While you are in Dock, tap the Information button ;. In the list that appears, tap
Prefs. The Dock Preferences slip appears.
Tap the checkboxes next to the preferences you want to select. When you are
finished, tap X to close the slip.
m Save password—This saves the password you set up in your connection software.
The password prevents others from creating or restoring a backup file without
your permission.
m Remove exact duplicates when importing—Each entry must be exact in every way
(the only field that is not checked is the last modified time) to be removed. This
may slow down the import process.
126 Chapter 5
Connecting using a serial cable
1 Tap “Connect via” and, in the list that appears, tap Serial.
Make sure the serial cable and Newton Serial Adapter are connected to the Newton
InterConnect port of your MessagePad and the other end of the cable is connected to
a serial port on your computer.
2 Tap Connect. A slip appears showing you the progress of the connection.
Make sure you’ve set your modem preferences. See “Prefs,” later in this section.
Modem connections may not be available for some connection applications.
1 Tap “Connect via” and, in the list that appears, tap Modem.
Tap here to
change the owner
or worksite.
Tap here to
choose a worksite
to connect to.
1 Tap “Connect via” and, in the list that appears, tap AppleTalk.
2 Tap “Connect to” and, in the list that appears, tap the worksite or computer you want
to connect to.
If you tap “Other computer,” a slip appears. Tap the computer you want to connect to.
If you tap Other Worksite, a slip appears. Enter information about the worksite, then
tap X to close the slip.
3 Tap Connect. A slip appears showing you the progress of the connection.
Note: AppleTalk is not available for the Microsoft Windows operating system.
128 Chapter 5
To connect your MessagePad to a computer or printer using IrDA, you need to use a
computer or printer that supports IrDA data transmission. For more information, see
the documentation that came with your computer or printer.
1 Tap “Connect via” and, in the list that appears, tap IrDA.
2 Tap Connect.
Make sure you point the infrared window of the MessagePad toward the infrared
window on the computer or printer. A slip appears showing you the progress of
the connection.
∞ Formulas
You use Formulas for financial calculations or to convert measurements or dates. Tap
the formula you want to use and a slip appears.
If you fill out all but one value, that is the value that is calculated.
Note: Once a value is calculated, you can solve for another field without closing the
slip by tapping the Clear button at the bottom of the slip or scrubbing out the
information in at least two fields.
Use this to convert U.S. measurements to metric, or vice versa. Tap Measurement. In
the list that appears, tap the type of measurement you want to convert.
Loan Payment
Use this to answer questions about loans paid back monthly with a constant
interest rate.
130 Chapter 5
Net Present Value
Enter the values you know. To indicate money you’re paying out, write the amount as
a negative number. To indicate money you’re receiving, write the amount as a
positive number. Do not include a percent sign when you write interest rates. The
calculated value appears.
Currency Exchange
Use this to convert from one currency to another or to determine an exchange rate.
Tap a diamond u to change the country and currency. Enter the value you know.
The converted value appears.
Use this to determine the number of days between two dates or the date that is a
specified number of days from another date.
Enter the values. Tap Start Date or End Date, enter dates, or write the number of days.
Date Conversion
Use this to determine the day of the week, week in the year, and day in the year for a
particular date.
Tap Date to enter the date. The calculated value appears in the space below.
132 Chapter 5
h Help
The on-screen help provides you with quick information about the MessagePad. Tap
a topic and a list of tasks appears.
Tap Topics to view the main help screen again, or tap X to leave Help.
I InOut Box
You use the InOut Box to manage items that you route. The InOut Box contains
items that have been routed to you, such as incoming faxes, beamed messages, and
electronic mail. It also contains items that you have routed or that are waiting to
be routed.
The InOut Box Preferences slip lets you set preferences for viewing items in the
InOut Box and lets you choose whether to show logged items and where to store items.
134 Chapter 5
Go to the InOut Box. Tap the Information button ;, and in the list that appears,
tap Prefs.
You can access the preferences slips for routing tasks while you have the
InOut Box open.
Tap the Information button ;and in the list that appears, tap your choice. Enter the
appropriate information in the slip that appears, then tap X to close it.
Tap the InOut Box icon and then tap the In Box button. A list of items in the In Box
appears. To view items in a specific folder, tap the folder tab, and in the list that
appears, tap the folder you want to see.
To view a specific item, tap the item. A slip appears with information about the item.
When you finish viewing it, tap X to close the slip. You can view items in the In Box
in several ways:
m by date
m by transport type—the way items were routed (beamed items, faxed items,
and so on)
m by status—unread, read, and so on
See “Setting Preferences for the InOut Box” earlier in this chapter.
136 Chapter 5
Viewing the Out Box
Tap InOut Box icon and then tap the Out Box button. If any items are in the Out Box,
a list appears. To view items in a specific folder, tap the folder tab, and in the list that
appears, tap the folder you want to see.
To view a specific item, tap the item. A slip appears with information about the item.
When you finish viewing it, tap X to close the slip. You can view items in the Out
Box in several ways:
m by date
m by transport type—the way items were routed
m by status—unread, read, and so on
For more information, see “Setting Preferences for the InOut Box” earlier in
this chapter.
8 Owner Info
This slip contains information about owners and worksites that you set up. This
information is used in various routing slips when you print, fax, beam, and mail
items, place telephone calls, and make connections to other computers.
An owner is a person who uses the MessagePad. The information under Owner can
include name, address, company, telephone and pager numbers, electronic mail
addresses, credit card and bank account information, birthday and anniversaries, and
an electronic signature. You can set up several owners or several personas for the
same owner if, for example, you want a separate identity for a private business.
A worksite is a place where an owner establishes his or her address and affiliated
information. For example, you can set up two worksites—one for your home and
one for your office. Worksite information can include telephone numbers and
dialing prefixes, printer, connection, and electronic mail information. You can create
several worksites.
138 Chapter 5
Creating an owner
When you first received your MessagePad, you probably went through the Setup
application. This sets up basic owner information for you. If you want to create
another owner, follow these steps:
1 Tap Owner Info 8.
A slip appears with the current owners and worksites listed.
Creating a worksite
140 Chapter 5
Viewing owner and worksite information
Go to the card you want to view and tap Show. In the list that appears, tap Card to
see the name card view, or tap All Info to see all of the information entered.
To see a list of all of the owners and worksites, tap the Overview button Ω. To go to
a specific owner or worksite, tap it.
If you use more than one electronic mail address to send and receive items, you can
create an owner card for each e-mail address. This allows you to select an address
quickly and easily. See “Owner Info” earlier in this chapter.
Tap the checkbox if you want to protect your Owner Info. Then, any time Owner Info
is accessed, a keypad appears allowing you to enter the security Personal
Identification Number, or PIN. (You must select a PIN before doing this. See the next
section, “Prefs.”)
m Tap a topic and a slip appears. Enter the appropriate information. The various
preferences you can set are explained in detail on the following pages.
x Security
To prevent unauthorized people from using your MessagePad you can set a
password, or Personal Identification Number (PIN), that your MessagePad asks for
once a day, once an hour, or each time it’s turned on. Write your PIN down and store
it in a safe place.
Important The PIN helps prevent unauthorized users from accessing your
information if your MessagePad is lost or stolen. Apple does not guarantee that the
PIN will completely secure the information in your MessagePad.
s Warning If you forget your PIN you won’t be able to back up your information and
you will have to do a hard reset in order to use your MessagePad, which will erase all
data stored in your MessagePad. Apple is not responsible for lost data due to
resetting the MessagePad. s
142 Chapter 5
1 Tap Set PIN. A slip appears.
2 Tap your PIN on the keypad, then tap “ent.”
3 On the confirmation slip that appears, tap your PIN again, then tap “ent.”
New buttons appear in the Security slip.
4 Tap Ask For PIN, tap your PIN on the keypad that appears, and tap “ent.”
5 In the list that appears, tap your choice—every time you turn on your MessagePad,
once an hour, once a day, or never.
Note: If you want to change this setting in the future, you have to enter your PIN.
6 Tap X to close the Security slip. Then tap X again to close the Preferences slip.
Entering your PIN
When your MessagePad asks for your PIN, a keypad appears. Tap your PIN, then
tap “ent.”
Tap Change PIN. Tap your current PIN on the keypad, then tap “ent.” Then tap a new
PIN on the keypad and tap “ent.” A confirmation slip appears. Tap your new PIN
again, then tap “ent.”
Changing when you must enter your PIN
Tap Ask For PIN and tap your PIN on the keypad, then tap “ent.” In the list that
appears, tap your new choice. Tap X to close the Security slip, then tap X again to
close the Preferences slip.
Removing the password
Tap Remove PIN. Tap your current PIN on the keypad, then tap “ent.”
© Locale
Use this area to choose which country’s standards to use. This affects things such as
the date, time, keyboard, and paper size.
Tap a diamond u and in the list that appears, tap your choice:
m Country—to set your country.
m Keyboard—to choose the type of keyboard layout you use.
m Paper Size—to choose the size of paper you use for printing and faxing.
144 Chapter 5
ˆ Sound
You can use this to play sounds over the MessagePad internal speaker, over a sound
output device connected to the MessagePad, or both. You can also set the type and
volume of the sound for alert messages, and can choose to hear sound effects while
using the pen.
Á Recording
You can use this to change the way the MessagePad makes sound recordings. You can
record sounds and messages using either the MessagePad microphone or a cable
connected to your MessagePad Newton InterConnect port and to a sound input
device. You can also change the quality of recording by selecting how much
information is recorded per second. For example, for a voice message that might not
require the highest-quality sound, you can record at a low rate of information per
second, whereas when recording music, you might record at a higher rate, for
increased clarity and fidelity.
You can also adjust the recording volume to better pick up quiet or loud sounds.
m Tap Alarm Sound and in the list that appears, tap your choice. This affects the
sound you hear for the minute timer and calendar alarm. The daily alarm has its
own sound (similar to a digital clock) and can’t be changed.
m Hold the pen on the Alarm volume slider and move it to the desired volume level
(to the right is louder).
m Tap Use System Volume to make the alarm volume the same as the volume for the
system. The Alarm volume slider disappears. (See “Checking Battery Status,
Setting Contrast and Volume” earlier in this chapter for information on setting the
system volume.)
m Tap Persistent Alarms to see a notification slip and hear a series of beeps at
intervals of several seconds when the alarm goes off. You can set the alarm to
“snooze” for a selected time, after which the alarm goes off again.
Daily alarm
When the daily alarm goes off, you hear a digital alarm clock sound and the Clock
appears. Tap X to close the Clock and turn off the sound.
146 Chapter 5
Minute timer and calendar alarm
When the minute timer or the calendar alarm (for a meeting or event) goes off, you
hear the selected alarm sound and see a slip.
To have your MessagePad sound the alarm again at a specified time interval, tap
Snooze and in the list that appears, tap your preference. The message slip closes. The
alarm goes off and another message slip appears at the selected time interval.
˘ Sleep
Use this if you want to save power and have your MessagePad automatically turn
itself off after a specified period of time. You can also set the MessagePad not to
sleep when plugged into a power adapter and set when to turn off backlighting.
m Tap Sleep and in the list that appears, tap the interval of inactivity after which you
want your MessagePad to turn off. To turn your MessagePad back on, slide the
Power switch down and quickly release it.
Important The backlighting feature of your MessagePad has a finite lifespan. Turn it
off when not using your MessagePad. If you select the “Never” option for turning
backlighting off, always turn off the backlighting when you finish viewing the screen.
„ Handwriting Recognition
You use this area to set preferences for how your MessagePad recognizes handwriting.
148 Chapter 5
7 Modem
You use this area to choose preferences for your modem setup.
m Modem volume—Tap the slider, hold the pen down, and move it to the right
or left.
m Require dial tone—Tap the checkbox to turn this on or off.
m Tap Pulse Dialing or Tone Dialing, depending on what type of telephone system
you have.
m Tap “Connect using” and in the list that appears, tap how you are connecting the
modem—by the default method (modem port), PC Card, or Serial Port.
m Tap “Modem setup” and, in the list that appears, tap the type of modem you are
using. The MessagePad automatically configures itself for that type of modem.
If your modem is not in the list, check with the manufacturer of your modem to
see if it’s compatible with the MessagePad and with one of the modem types listed
or if the appropriate driver software is available.
m Tap Use Defaults to reset all modem preferences to their original factory settings.
s Setup
You use the Setup application to personalize your MessagePad. It allows you to set
the time, date, and owner information, align the pen with the screen, set your
handwriting style, and enter an electronic signature.
When you first received your MessagePad and turned it on, you should’ve seen the
Welcome screen of the Setup application and taken a few minutes to go through the
series of screens.
If you did not go through the Setup application, and would like to do so, open the
Extras Drawer, tap the Folder tab, and tap Setup. (If you filed Setup in another folder,
tap the name of that folder.) Tap Setup s.
150 Chapter 5
The Welcome screen appears.
Follow the instructions on each screen. On the last screen, you can change any
information you entered, or tap Done if you are finished and want to use
your MessagePad.
152 Chapter 5
z Time Zones
You use this application to tell your MessagePad which city you’re in (or closest to).
Your home time zone determines your e-mail access number. You can also set a
second time zone if you’re traveling, to get information on specific cities and countries.
At the top is your current time zone, based on the worksite information. To change
this, tap the diamond. In the list that appears, choose the worksite you want as your
current time zone. To choose another city, tap Other City. In the slip that appears, tap
a city, then tap X to close the slip.
A second time zone is listed near the bottom of the Time Zones slip. You can set this
if you travel or want to see the time and date for a particular city. The distance from
your current time zone is also listed.
To change the second time zone, follow these steps:
1 Tap the diamond u next to the second time zone.
A slip appears with the name of the country at the top and the city highlighted.
Tap a country
to select it.
Tap a tab to see a list of
different countries; tap it again
to see the countries filed under
the second letter on the tab,
and so forth.
154 Chapter 5
Adding a city
To add a city tap the New button in the Time Zones slip. Then enter the appropriate
information in the slip that appears.
m Tap Closest City and in the slip that appears, tap the nearest city. Tap X to close
the slip. This automatically sets the area code, country, time zone, and prefix
for dialing.
m Tap Country and in the slip that appears, tap the country to change it. Tap X to
close the slip.
m Tap Lat./Long. to change the latitude and longitude for the selected city.
m Tap GMT Offset to change the Greenwich Mean Time Offset, which tells how
many hours the city’s time is from GMT. Cities to the east have positive values.
Cities to the west have negative values.
m Tap Daylight Savings to change the type of time system you want.
The new city now appears at the bottom of the Time Zones slip.
Deleting a city
To delete a city, select it as your second city. Tap the Routing button and tap Delete.
If you delete a city that already existed (you did not add it), you can only get this
information back if you do a hard reset. See Chapter 12, “Troubleshooting” for
more information.
You can view information in Time Zones several different ways. Tap Show and in the
list that appears, tap your choice.
m All Info—Shows information on the city and country listed in your second time zone.
m Notes—Allows you to enter and view notes about the city in the second time zone.
m City Info—Allows you to see and change information on the city in your second
time zone.
156 Chapter 5
m Country Info—Allows you to see and change information on the country in your
second time zone.
m Two Clocks—displays two clocks showing the time and date for both selected
time zones.
158 Chapter 5
6 Organizing and Finding Information
You can organize the information in your MessagePad by filing things in folders that
you can create and name. You can also use your MessagePad to find any text
information that is stored in the internal memory of your MessagePad or on a
storage card.
Organizing information
You can file name cards, notes, calls, and icons in the Extras Drawer into folders. If
you create a new item while you’re in a folder, the new item is automatically stored in
that folder. If you create an item while you’re looking at a list of all your items or
cards, the new item or card goes into the Unfiled folder.
The MessagePad has two types of folders–global and local. Global folders exist in
every location on your MessagePad, while local folders appear only in the application
they are created in. You can create up to 12 global and 12 local folders, except in the
Extras Drawer, where you can only create local folders.
For example, you may want to create a folder called “Friends” in the Name File and
you don’t want that folder to show up in any other application. You can make the
“Friends” folder local to the Name File.
159
Your MessagePad comes with four global folders that are already named—Unfiled,
Business, Miscellaneous, and Personal. These folders, except for Unfiled, can be
renamed or deleted.
Note: If you reach the limit of 12 global folders and want to create another folder, a
message appears telling you that the folder will be created only in the current
application (so it becomes a local folder). If you reach the limit of 12 global and 12
local folders, a message appears telling you that you cannot create any more folders.
You can also file items into folders on a storage card. For more information,
see “Filing Information on a Storage Card” in Chapter 9, “Using Storage and
Application Cards.”
If you’re in one folder and move an item to another folder, the item seems to
disappear, because it moves immediately to another folder.
Filing multiple items and cards
You can put a number of items or name cards in a folder all at once.
1 Go to the Notepad or Name File.
2 Tap the folder tab, then tap the name of the folder you want to view.
3 Tap the Overview button Ω.
A list of all the items or cards in that folder appears.
160 Chapter 6
4 Tap the checkbox next to each item or card you want to file.
A checkmark appears in the box next to each selected item.
5 Tap the Folder button F and in the slip that appears, tap the name of the folder that
you want to file the items or cards in.
6 Tap File.
You can select icons in the Extras Drawer and put them into different folders.
1 Tap Extras E to open the Extras Drawer.
2 Tap the folder tab and from the list that appears, tap the name of the folder that
contains the icons you want to file (usually this is the Unfiled Icons folder).
4 Tap the Folder button F and in the slip that appears, tap the name of the folder that
you want to file the icons in.
5 Tap File.
The MessagePad comes with several existing folders. You can create additional folders
and delete and rename folders.
1 Go to the application where you want to create new folders, such as the Notepad.
162 Chapter 6
2 Tap the Folder button F.
The folder slip appears. If a card is inserted in your MessagePad, separate buttons
appear for internal storage and the card.
Tap one of the
buttons to choose
where the folder
is located.
m To rename a folder, tap Edit Folder. Scrub out the name of the folder and write the
new name. A slip appears asking if you want to change the name of the folder. Tap
OK to change the name. The folder name is updated and the revised folder name
appears in the folder slip. Then tap X to close the slip. The items in the folder
remain there.
m To delete a folder, choose the folder, tap Edit Folder, then tap Delete. A slip
appears asking if you really want to delete the folder. Tap OK. Then tap X to close
the slip. The items inside the folder move to the Unfiled folder.
4 Tap X when you are finished.
m Tap “text” to search for information that is in text format (not ink text). Enter the
words or characters you want to find on the dotted line.
m Tap “dates before,” “dates on,” or “dates after” to select a date. A slip appears.
164 Chapter 6
To move to another month, tap the arrows. To change the year, tap the upper half of
a number to increase it, and the lower half to decrease it. Tap a day to select it. When
you have selected the date, tap X to close the slip.
Tap the arrows to change the month.
Selected areas
have a checkmark Tap the scroll arrows to move
in the box. up and down in the list.
m If the MessagePad finds more than one item, it displays a list of the items
it found.
166 Chapter 6
Tap the title of an item to go to it. Tap the Overview button Ω to go back to the list
of found items.
m If a slip appears saying that too many items were found and you must narrow your
search, you can
m go back to the Find slip and narrow the search.
m close some or all open applications to free up memory and perform the
search again.
Printing
You can use many Apple printers and printers from other manufacturers with
your MessagePad. For a list of printers you can use, see Appendix D,
“Printer Compatibility.”
The MessagePad does not have to be connected to a printer when you choose to
print an item. If you choose to print at a later time, the item waits in your InOut Box,
ready to print.
To connect directly to an Apple printer, plug one end of the optional serial cable and
optional Newton Serial Adapter into the Newton InterConnect port on your
MessagePad and the other end into the printer.
If you are using a network printer, plug a LocalTalk box into your MessagePad and
connect it to another LocalTalk box. The second LocalTalk box can either be on the
network or plugged directly into the printer.
To connect a printer that has a parallel (Centronics-type) interface, you need the
Newton Print Pack, available from your Apple-authorized Newton dealer.
169
Preparing to print
m Make sure you have filled out an owner and worksite in Owner Info. The
information is used in your return address when you print memos or letters.
m Choose a paper size in the Locale preferences.
m Set your print preferences as described in the section below.
Setting print preferences
m To see status messages while you are printing, make sure the checkbox next to
“Show status dialogs” is selected.
m To set when you want to print an item, tap “When printing” and, in the list that
appears, tap “Send now,” “Send later,” or “Specify when.” “Send now” prints the
item right away. “Send later” places the item in the InOut Box until you decide to
print it. “Specify when” gives you a choice of Now or Later when you fill out the
routing slip.
m To choose what to do with an item after printing it, tap “After printing” and in the
list that appears, tap File, Log, or Delete.
5 When you are finished, tap X to close the slip.
170 Chapter 7
Printing an item
m Tap the diamond u at the upper-left corner of the slip to change your worksite.
m Tap Printer.
To select a personal printer, tap your printer’s name in the list if you see it. If not, tap
Choose Other Printer and in the slip that appears, tap your choice.
172 Chapter 7
Faxing
If you have a Newton-compatible fax modem, you can use the MessagePad to send
and receive faxes. The MessagePad does not have to be connected to a fax modem
when you choose to fax an item. If you choose to fax at a later time, the item waits in
your InOut Box, ready to fax. For more information, see “Routing Items in the InOut
Box” later in this chapter.
If you are using a phone system that doesn’t have a dial tone, make sure “Require dial
tone” is not checked.
m Set your fax preferences.
m Tap “Answer phone after” to set the number of rings it takes to answer the phone.
In the list that appears, tap your choice.
m Tap “When faxing” to set when you want to fax an item. In the list that appears, tap
your choice.
m Send now—always faxes the item right away.
m Send later—always routes the item to the InOut Box. The items wait in the
InOut Box until you choose to fax them. If you designate a specific time and
day to route items, they are sent then.
m Specify when—gives you a choice of Now or Later when you fill out the
routing slip.
m Tap “After sending a fax” to select what to do with an item after it is faxed. In the
list that appears, tap your choice.
m Tap “File read faxes in” to choose where to file faxes that you have received and
read. In the list that appears, tap your choice.
174 Chapter 7
m Tap Schedule to set the schedule when you want your MessagePad to send and
receive faxes. In the slip that appears, select the appropriate information.
Sending a fax
The MessagePad does not have to be connected to a fax modem when you choose to
fax an item. The item waits in your InOut Box until you send the fax.
1 Go to the item you want to fax.
When faxed, text is formatted as wide as the fax page. Drawings and ink text are
centered on the page.
2 Tap the Routing button µ and in the list that appears, tap Fax.
3 Enter the appropriate information.
Tap here to change
your worksite.
176 Chapter 7
Manual dialing
Sometimes you may need to dial the fax number yourself; for example, when asking
an operator for a particular extension or faxing on a telephone connection that
you’ve already established.
1 Connect the MessagePad to a fax modem. Make sure a phone is connected to the
same line. (See your modem manual for instructions.)
2 Go to the item you want to fax.
3 Tap the Routing button µ and in the list that appears, tap Fax.
A routing slip appears.
4 Enter the appropriate information. Be sure to check the “Manually connect” box in
the fax routing slip.
5 Dial the number on your phone and wait until you hear a high-pitched tone on the
other end of the line.
6 Tap Fax and in the slip that appears, tap Now.
7 Wait about eight seconds, until you hear sounds from the modem speaker.
8 Hang up the phone.
If the text of the fax includes the recipient’s name, and if the recipient has a fax
number in the Name File, you can tap Assist R to have the MessagePad automatically
fax the item. To do this, select the recipient’s name, tap Assist R, and tap Please. In
the list that appears, tap Fax. Tap Do and enter the information in the Fax slip that
appears. Tap Fax to send the fax.
1 Tap Extras E to open the Extras Drawer, tap the folder tab, then tap Unfiled Icons.
(If you filed the InOut Box in another folder, tap that folder’s name.)
2 Tap InOut Box I.
3 Tap Receive and in the list that appears, tap Fax.
A slip appears, asking if you want to wait for the call or connect manually.
m If you tap Wait For Call, the MessagePad prepares the fax modem and waits for the
fax telephone call. Once the connection is made, a slip appears showing you the
status of the fax.
m If you tap Manually Connect, a slip appears with instructions. Follow these
instructions, then tap Fax. Once the connection is made, a slip appears showing
you the status of the fax.
Viewing a fax
You can view items that have been faxed to you in several formats.
1 Tap Extras E to open the Extras Drawer, tap the folder tab, then tap Unfiled Icons.
(If you filed the InOut Box in another folder, tap that folder’s name.)
2 Tap InOut Box I.
178 Chapter 7
3 Tap the faxed item you want to view.
A viewer appears showing you the information.
4 Tap Tools and in the list that appears, tap a choice to see different views of the item
or to rotate the image.
180 Chapter 7
4 Select the appropriate information.
m Tap the checkbox next to “Receive beams automatically” if you want your
MessagePad to receive beams at any time. Receiving automatically uses more
battery power.
m Tap the checkbox next to “Put away beams automatically” if you want your
MessagePad to put beamed information into the corresponding application. For
example, if you receive a note, it is automatically filed in your Notepad.
m Tap the checkbox next to “Show status dialogs” if you want to see status messages
while you are beaming.
m Tap “When beaming” to set when you want to beam an item.
m Send now—always beams the item right away.
m Send later—always routes the item to the InOut Box. The items wait in the Out
Box until you choose to beam them.
m Specify when—gives you a choice of Now or Later when you fill out the
routing slip.
m Tap “After beaming” to select what to do with an item after it is beamed. In the list
that appears, tap your choice.
m Tap “File read items in” to choose where to file beamed items that you have
already read. In the list that appears, tap your choice.
5 When you are finished, tap X to close the slip.
A slip appears showing you the status of the beam. The MessagePad tries to beam the
item for about two minutes. If it doesn’t succeed, a message appears in the InOut
Box and the item stays in the InOut Box until you try again.
182 Chapter 7
Receiving beamed information
If you have set your MessagePad to receive beams automatically (see “Setting Beam
Preferences” earlier in this chapter), you can receive beams any time. Make sure the
infrared windows on both Newton devices are pointed directly at each other and that
there’s a clear line of sight between them. A slip appears showing you the progress of
the beam. Receiving automatically uses more battery power.
Receiving beams manually
Your MessagePad is preset to put beams away automatically, filing information with
the corresponding application. For example, a note beamed to you is automatically
placed in your Notepad. You can view the beamed item by opening the application.
If you chose not to put away beamed items, items are placed in the InOut Box. A
blinking star appears at the top of the screen. Tap the star and in the slip that
appears, tap InOut Box I. A slip with the beamed information appears.
Indicates who
sent the beam
and when it was
received.
184 Chapter 7
Using electronic mail
You can use electronic mail, or e-mail, to send and receive text messages, packages,
and entire items from the Notepad, Name File, Date Book, Calls, or InOut Box. Some
third-party applications may also support the mail option.
To send and receive e-mail you must have
m A Newton-compatible modem and the cables required to connect it to the phone
line and to your MessagePad (see your modem manual for more information).
m An e-mail account with an e-mail service provider.
To connect a modem, see the instructions that came with the device. The
MessagePad does not have to be connected to a modem when you choose to send an
item. Items to be mailed wait in the InOut Box until you decide to mail them.
For more information, see “Prefs” in Chapter 5, “Managing the MessagePad 2100.”
If you are using a phone system that doesn’t have a dial tone, make sure “Require
dial tone” is not checked.
Sending e-mail
4 Tap Mail.
186 Chapter 7
5 In the slip that appears, tap Now or Later.
If you tap Later, the item is routed to the Out box of the InOut Box. To mail items
that are in the InOut Box, see “Routing Items in the InOut Box” later in this chapter.
If you tap Now, enter the appropriate information in the slip that appears.
m Tap Assist q to change the access number, add a prefix, or enter credit
card information.
5 Tap Connect.
188 Chapter 7
m Tap the Folder button F to file the item.
m Tap the Routing button µ to print, fax, beam, duplicate, or delete it the item.
You may also see an option labeled Add to Names, which creates a card in the Name
File for the sender and includes the sender’s e-mail information.
Using downloaded packages
Packages that are sent to you via e-mail must be put away in the Extras Drawer before
you can use them. Go to the InOut Box and tap the item. Tap the Tag button t and
in the list that appears, tap Put Away. The package is placed in the Extras Drawer.
You can reply to or forward an e-mail message and select the text you want to include
in the reply or in the forwarded message.
1 Go to the e-mail message you received in the InOut Box.
2 Select the portion of the text you want in the reply. Hold the pen on or near the
text until a heavy mark appears under the pen, then draw the mark over or around
the text.
You can select up to one screen of information.
3 Tap the Tag t button and in the list that appears, tap Reply or Forward.
A slip appears.
4 Enter the appropriate information in the slip.
The item is automatically tagged “Pending.”
5 Tap Send and a routing slip appears.
Enter the appropriate information and tap Mail.
190 Chapter 7
Using the blinking star notification
When you are routing an item and the status slip is hidden (if you’ve opened another
application or tapped X to close the status slip), a blinking star appears at the top of
the screen.
Tap the star to see the status slip.
The blinking star also appears when you receive new items in your InOut Box while
it is not open. For example, if you selected “Receive beams automatically” in the
Beam Preferences slip and someone beams you information while you’re working in
the Notepad, the star appears at the top of the screen indicating that something is in
the InOut Box. Tap the star and a list appears. Tap InOut Box I to open it and see
the item.
Note: A blinking star also appears at the top of the screen each time you write a
word that is not in the MessagePad’s dictionary. For more information, see “Using the
Word List” in Chapter 1, “Writing and Drawing.”
193
2 You can enter your request in two ways:
m Write your request on the line.
m Tap Please and in the list that appears, tap the request word you want.
194 Chapter 8
6 When you’re finished, tap the button near the bottom of the slip to perform the
action. Tap Schedule, for instance, to schedule the meeting.
1 Write at least one word of your request, beginning with a request word or one of
its synonyms.
2 Select the request. Place the pen on or near the item until a heavy mark appears
under the pen. Then draw the highlighting mark over or around the item.
Example of selected
text from a checklist.
196 Chapter 8
m Mail to send the item on the screen as electronic mail.
Synonyms: email, send
Mail Anderson opens a mail slip with the name Anderson filled in.
m Print to print the item on the screen.
Synonyms: none
Print opens a print slip for the item on the screen.
m Remember to add a reminder to your to-do list.
Synonyms: remember to, don’t forget to, don’t let me forget to, to do, remind,
remind me, remind me to
Remember to back up Monday opens a to-do slip with Monday’s date and “back up”
as the subject.
m Schedule to add a meeting or event to your calendar.
Synonyms: meet, meet me, meet with, talk to, talk with, breakfast, breakfast with,
brunch, brunch with, lunch, lunch with, dinner, dinner with, holiday, birthday, b-day,
bday, anniversary
Lunch Linda opens a schedule slip. The date and time depend on when you make
the request.
The MessagePad infers important information to help you carry out your requests.
m Your MessagePad knows which area in the MessagePad you are using, which
makes it easy to request assistance. For example, if you tap Assist R, tap the
diamond u, and tap Print, your MessagePad assumes you want to print the item
you’re looking at.
m Your MessagePad also knows the last thing you did. For example, if you write a
name, tap Assist R, tap the diamond u, and tap Fax, your MessagePad assumes
you want to fax the item you’re looking at to the person whose name you
previously wrote.
m Your MessagePad knows what you select. For example, if you select a name from
an item in the Notepad, tap Assist R, tap the diamond u, and tap Mail, the
MessagePad assumes you want to e-mail the note you’re looking at to the person
whose name you selected.
198 Chapter 8
Accessing on-screen help using Assist
On-screen help is available at any time on the MessagePad. On-screen help contains
basic information on how to perform various tasks.
To access the on-screen help:
1 Make sure no text is selected, then tap Assist R.
A slip appears.
2 Tap How Do I?
A list of help topics appears. The on-screen help is organized by topics and subtopics.
The topics cover main areas, while the subtopics list specific tasks.
5 When you finish viewing information, tap Topics to go back to the list of topics, or tap
X to leave the on-screen help.
200 Chapter 8
9 Using Storage and Application Cards
You can use PC cards with your MessagePad. There are three types of cards:
application cards (also called titles), storage cards (which add more storage space to
your MessagePad), and accessory cards (such as modems). For information about
using an accessory card, see the documentation that came with the card.
201
4 Insert the new card in the card slot.
The card fits only one way; don’t force it. Push the card all the way in until it locks in
even with the side of the MessagePad.
Release button
Your MessagePad takes a few moments to examine the card. When your MessagePad
is ready to use the card, a slip appears with information about the card.
What you see next on your MessagePad depends on what type of card you inserted:
m New storage card—A message appears telling you the card cannot be read
and you need to erase all the information on it. See the next section, “Using
Storage Cards.”
m Previously used storage card—A slip appears showing the name of the card.
See the next section, “Using Storage Cards.”
m Application card—An icon appears in the Extras Drawer. See the section “Using
Application Cards” later in this chapter.
m Accessory card—A slip appears showing that a communications card has been
inserted. For information about using an accessory card, see the documentation
that came with the card.
Important After removing a card, always insert another card or insert the
protective plastic card that came with your MessagePad. Never use or store your
MessagePad while the card slot is empty.
202 Chapter 9
Using storage cards
You can use storage cards to store new information and to back up information in
your MessagePad.
You can use any Newton storage card with your MessagePad. Other cards may also
work, including SRAM (static random-access memory) cards that have their own
batteries. Ask your Apple-authorized dealer for more information.
Important Most storage cards have a write-protect switch that allows you to lock
and unlock the card for security purposes. If you lock the card, you cannot move or
revise information that is on the card. To find out whether a card is locked, see the
section “Protecting Information on a Storage Card,” later in this chapter.
Storage cards that are new or that have been used on devices other than a
MessagePad may need to be erased and formatted before you can use them.
Note: To use a card that has been used in a device with an earlier version of the
Newton operating system, see the next section, “Using a Storage Card Formatted
with an Earlier Version of the Newton Operating System.”
1 Insert the new storage card.
A message appears.
s Warning Tapping Erase erases any information and data on the card, including
packages or a backup. s
2 Tap Erase.
You see another warning message asking if you really want to erase the information
on the card.
You can use storage cards in your MessagePad that were formatted with an earlier
version of the Newton operating system. You can choose to read or convert the card.
Insert the card. A warning slip appears.
m If you tap “Mount read-only,” you can view your information and packages, but
you cannot edit them. You can still use the card with a Newton device that has an
earlier version of the Newton operating system.
m If you tap Convert, the MessagePad converts the card’s format and data for use
with the Newton 2.1 operating system. A warning message appears telling you that
converting the card makes it unusable on a MessagePad that has an earlier version
of system software. Tap Convert to convert the card.
204 Chapter 9
Important Some applications and application data may not be compatible with the
Newton 2.1 operating system. Please contact the software publisher for more
information about compatibility or an upgrade.
You can file name cards, notes, calls, and icons in the Extras Drawer in folders on a
storage card.
1 Go to the item you want to file.
To file an icon from the Extras Drawer, you must first select it. See the section
“Putting Icons from the Extras Drawer Into Folders” in Chapter 6, “Organizing and
Finding Information.” You cannot move built-in icons, such as Formulas, to a folder
on a storage card.
2 Tap the Folder button F and, in the slip that appears, tap the name of the card and
the name of the folder.
3 Tap File.
The item is now moved to the card and isn’t available if you remove the card.
A small triangle appears on the Folder button for the item, unless it’s stored in the
Extras Drawer.
To store new information that you create and packages that you transfer to your
MessagePad, open the Card slip.
1 Tap Extras E to open the Extras Drawer, tap the Folder tab, then tap Unfiled Icons.
(If you filed Card in another folder, tap that folder’s name.)
2 Tap Card B.
A slip appears.
3 Tap “Save new info and packages on this card.” Your MessagePad automatically saves
your new information and packages on the card.
You can check the amount of available space on a storage card whenever the card
is inserted into your MessagePad. Tap Extras E to open the Extras Drawer, then tap
Card B. (If you filed Card in another folder, tap that folder’s name.) A slip appears.
206 Chapter 9
Deleting information on a storage card
You can remove software that you no longer use or need from a storage card.
1 Tap Extras E to open the Extras Drawer. (If you filed Card in another folder, tap that
folder’s name.)
2 Tap Card B.
The card slip appears.
2 Tap Erase.
3 In the slip that appears, tap a choice.
You can lock most storage cards so that you can’t move, delete, or change any
information that’s on the card (although you can see, copy, and use the information).
You can’t store new information on a locked card.
To lock a card, remove it from the card slot and slide the write-protection switch
toward the edge of the card, as shown.
To unlock the card, slide the write-protection switch back toward the center of
the card.
See your storage card instructions to determine whether the card has a battery. If it
does, you must change the battery when you see a message that the card’s battery is
low. To change the battery, follow the instructions that came with the card.
208 Chapter 9
Using application cards
Application cards contain software in a variety of categories, including financial
tools, business and personal productivity tools, travel guides, reference information,
and games.
To use an application card:
1 Insert the card.
Make sure you push it all the way into its slot.
Wait for a slip to appear indicating that the MessagePad has examined the card.
2 Tap Extras E to open the Extras Drawer.
An icon for the application appears in the Extras Drawer.
3 Tap the icon and follow the instructions that came with the application.
s Warning Each storage card can only store one backup file for a particular
MessagePad. If there’s already a backup stored on the card, it is replaced with the
new backup. (Other information on the card is not erased.) s
4 Tap Backup.
A backup slip appears.
5 Tap the applications whose information you want to back up.
If you want to make a backup copy of everything on your MessagePad, tap All. Tap it
again to deselect all applications. To back up all the packages stored in the internal
memory (not including the built-in applications), tap the checkbox next to “Backup
all packages.”
Tap the checkbox next to each
application you want to back up.
212 Chapter 10
6 Tap Backup.
A slip appears showing you the progress of the backup.
The MessagePad automatically creates a new backup. If there was a previous backup
on the card, your MessagePad replaces the old backup with the new backup.
When the MessagePad is finished backing up the information, the progress slip goes
away. A Restore button now appears on the card slip.
7 Tap X to close the card slip.
4 Tap Restore.
A message appears asking you if you really want the information on your MessagePad
to be replaced with the information in the backup.
5 Tap Restore.
A slip appears showing you the progress of the restoration. When your MessagePad is
finished restoring the information, a slip appears telling you to restart your
MessagePad.
6 Tap Restart.
Your MessagePad restarts.
7 Tap X to close the card slip.
214 Chapter 10
11 Viewing Newton Books
You can use the Newton Book Reader application to view a Newton book on the
MessagePad. When you install a Newton book, the package appears with its own icon
and title. The Newton Book Reader automatically becomes available on your
MessagePad when you install a book package.
Using Newton Book Reader, you can do all the following:
m open a Newton book
m move from page to page to view the book
m open a table of contents to jump to a specific topic
m set bookmarks to move quickly to a particular page whenever you want
m make annotations in the text
m copy and paste text (but not edit text)
m print or fax a book
215
Opening a book on your MessagePad 2100
You can only have one Newton book open at a time.
If you installed the book on your MessagePad, you can find the book icon in the
Extras Drawer.
To open a book:
1 Tap Extras E to open the Extras Drawer, then locate the book icon.
2 Tap the book icon.
216 Chapter 11
Viewing pages
After you open a book, the book appears on the screen.
You can move page by page through a book by tapping the up or down arrows.
You can use the Newton Book Reader controls to navigate, annotate, or print
information in the book.
218 Chapter 11
Using Newton Book Reader controls
When a book is open, you see the Newton Book Reader controls. These controls
allow you to view and annotate the Newton book.
You can mark up and make notes on a book. You can hide or display the annotations
whenever you want. You can also print or fax the book if your MessagePad is
connected to a printer or a fax modem.
When the controls appear, the number of the currently displayed page appears in the
page number button.
To move to a specific page:
1 Tap the Page Number button 1.
The page number slip appears.
2 Write the number of the page you want to go to.
You can easily display pages that you refer to frequently by setting bookmarks.
When you tap the Bookmark button J, the bookmark slip appears. This slip shows
miniature images of the pages that are currently marked. The size of the slip changes
depending on how many pages you mark. You can mark up to six pages in a book.
To set a bookmark
If you create more than six bookmarks, the last bookmark is added to the slip and the
first bookmark you created is erased.
220 Chapter 11
To display a marked page
2 Tap Unmark.
A list appears.
You can select and copy any text in a book. You can move the copied text to
another application.
To copy parts of a Newton book
222 Chapter 11
3 Drag the selected item to one side of the screen.
The item becomes a small box, waiting for you to place it in another document.
6 Drag the box from the side of the screen to where you want it.
The information appears and is still selected.
224 Chapter 11
7 Tap the selection to deselect it.
The information is in its new location.
You can add your own annotations to a book by tapping the Markup button.
You cannot edit a Newton book on your MessagePad. You can however, mark the
copy by writing, drawing, or typing on the on-screen keyboard. You can also hide
your annotations. After marking up a book, you can print it or fax it with
your annotations.
To annotate a book:
1 Tap the Markup button j.
2 Make the annotations you want.
You can write, draw, or use the on-screen keyboard. When you’re annotating, you cannot
select text in the book, but you can select, move, and erase (scrub) your annotations.
To hide your annotations, tap the Markup button j again.
226 Chapter 11
Printing and faxing a Newton book
You can print or fax all or part of a Newton book when your MessagePad is connected
to a printer or fax modem. If you annotated the book, you can choose to include
your annotations when you tap Format to select a format.
To print or fax a book, follow these steps:
1 Connect your MessagePad to a printer, a fax modem, or fax modem card.
See Chapter 7, “Routing Information,” for more information.
2 Open the book you want to print or fax.
3 Tap the Routing button µ.
4 In the list that appears, tap Print Book or Fax.
A page number slip appears on top of a print or fax slip.
5 Write the page numbers you want to print.
229
Resetting the MessagePad
Resetting your MessagePad can resolve some problems. You can try three different
types of reset: a software reset, a hardware reset, and a system reset. Be sure to try
these resets in the order presented to limit the risk of losing data.
m Software reset: Press and hold down the Reset button (on the back of the
MessagePad) for two seconds. This procedure does not erase the information that
you have stored in your MessagePad and may solve many problems.
m Hardware reset: Press and hold down the Reset button (on the back of the
MessagePad) for twenty seconds. When you perform a hardware reset, you risk
losing the last information most recently entered on your MessagePad.
m System reset: Remove the batteries from your MessagePad and leave them out for
at least twenty minutes. When you perform a system reset, you risk losing some
information entered on your MessagePad, and will need to reset your clock and
calendar information.
Check the time in the Date and Time preferences whenever you press Reset. (The
MessagePad’s clock may lose some time when you press Reset.)
Hard reset
If you’ve tried the software, hardware, and system resets and your MessagePad still
doesn’t work properly, call 1-800-500-7078 to find out if there’s anything else you can
do. If not, you can try a hard reset.
s Warning A hard reset erases all data and information in the MessagePad’s internal
memory. This includes any applications that were already on your MessagePad when
you bought it (including the Newton Tour and HW Instructor). It also erases
information you have stored, such as name cards, notes, calls, and pages in the Date
Book. This procedure does not remove the MessagePad’s built-in programs,
operating system software, or system updates. s
230 Chapter 12
To do a hard reset:
1 Remove any storage or application cards that are inserted in the MessagePad.
2 Press and hold down the Reset button and then press and hold down the Power switch.
3 Hold down the Reset button for two seconds, then release it while continuing to hold
down the Power switch. Continue holding down the Power switch until a message
appears asking if you want to erase your data completely.
4 Tap Yes.
Another slip appears telling you that all of the data will be erased.
5 Tap OK.
All the information (including any packages you loaded and other applications that
are not built in) is erased and your MessagePad reverts to the defaults set at the
factory. This procedure may take several minutes.
The screen
The screen appears too light or too dark.
Make sure your MessagePad is not too cold (it’s designed to be used in temperatures
between 32° F and 104° F, or 0° C and 40° C).
Troubleshooting 231
Personal Identification Number (PIN)
The MessagePad doesn’t recognize my password.
Your only option is to do a hard reset. This erases all data and information on your
MessagePad. If you set a PIN in the future, remember to record the PIN in a safe place
and always keep your information backed up. See the instructions in “Hard Reset”
earlier in this chapter.
Alert messages
A message says the internal memory or storage card is full.
Your MessagePad can undo only the last change you made. If you tap it again, it will
redo your last action. There are some actions the MessagePad cannot undo, such as
backing up and restoring information.
A message asks for a card I’ve removed.
s Warning Do not insert any card except the one asked for. Information on the
second card could become damaged. s
If the card isn’t available, you can start over by doing a software reset (press the Reset
button on the back of the device for two seconds). However, if you do not reinsert
the card, you may lose information stored on it.
232 Chapter 12
A message says my MessagePad is out of memory and suggests that I
restart it.
Your MessagePad has no more memory available to complete your request. Tap the
Restart button; usually this corrects the problem.
To avoid this situation in the future:
m Don’t run too many applications at once. Close applications when you are no
longer using them; even if you’re not doing anything in an open application, it still
takes up valuable memory.
m Limit the number of background activities. Turn off “Receive beams automatically”
in the Beam preferences. Don’t set the MessagePad to receive calls using the
modem (in the Calls preferences). Wait for an item to finish printing before
continuing with another activity (don’t, for example, write in the Notepad while a
print job is active). Close applications before attempting communication.
m Remove unneeded applications. Even if you never use or open an application, it
uses a small amount of memory. Limiting the number of packages you have
installed may be enough to avoid out-of-memory situations.
A message says a storage card is write-protected.
m Take the card out of your MessagePad and turn off the card’s write-protection by
sliding the switch on the exposed edge of the card.
m The storage card may be full. Tap Extras E, tap the Information button ;,
then tap Memory Info. In the slip that appears, you’ll see how much space is left
on the card.
When using Find, a message says too many items were found.
m Your MessagePad may be running out of memory. Close some applications. Then
perform the search again.
m Go back to the Find slip and narrow the search further by adding additional terms
or searching by date.
Troubleshooting 233
Writing and drawing
I’m not tapping where I think I’m tapping.
You need to realign the pen. Tap the Recognition button Ú and, in the list that
appears, tap Preferences. Tap Align Pen and follow the instructions on the screen.
Tap X to close the slip.
Why isn’t my handwriting recognized?
If your handwriting is not recognized and appears as ink text, there may be several reasons.
m Make sure you’ve selected the Text recognition setting Ú.
m If you are using the Text recognition setting but your handwriting wasn’t
converted, the MessagePad may have been too busy—for example, sending a fax or
receiving beamed information—to convert your handwriting. Scrub out the
handwritten text and try again, or double-tap the word to try converting again.
m Double-tap on the selected ink text again.
m Your MessagePad may be low on memory. Try quitting some applications (tap X
to close them).
m Try not to write too far ahead of the recognition.
m Space out your words more.
m You may be writing long, overhanging crossbars on letters such as capital J and
capital and lowercase t. Try using shorter strokes when you form these letters.
m You may be writing long, underhanging strokes on letters such as lowercase g or y.
Try using shorter strokes when you form these letters.
m If you selected Printing as your handwriting style, you may be writing in cursive, in
particular, long cursive words or expressions. You must write in the style that you
select in order for the MessagePad to recognize your writing. In this case, either
use printing, or change your handwriting style selection to Cursive.
I wrote information in Ink Text. Can I convert it to text?
Yes. Select your handwriting and tap it twice. To convert a single word, tap it twice.
234 Chapter 12
The MessagePad misinterpreted a word I wrote.
When you select the Text recognition setting Ú, the MessagePad uses a word list to
interpret the words you’re writing. You can use the on-screen keyboard to enter the
word in the MessagePad’s word list.
m To correct a word, tap it twice. If the correct word is not in the list, use the
corrector button L or the on-screen keyboard _ to enter the word correctly.
m Make sure the checkbox next to “Add new words to Personal Word List” is
checked. To do this, tap Extras E, tap the folder tab, then tap Unfiled Icons (if
you filed Prefs in a different folder, tap the name of that folder). Tap Prefs π, then
tap Handwriting Recognition „. Now tap Options and, from the list that appears,
tap Text Editing Settings.
m Check the options in the Handwriting Recognition preferences to make sure they
reflect your own writing style.
The MessagePad interprets my handwriting too slowly.
Check the settings in the Handwriting Recognition preferences. You can also select
the Ink Text recognition setting : to store your handwriting as ink text, which can
be recognized later if you want.
When I erase by scrubbing, the scrub mark turns into letters.
Try scrubbing more slowly. Make sure your scrub mark is a zig-zag with at least
four line segments joined at sharp angles. Make sure it goes well above and below
the word.
Long jagged lines appear on the screen while I’m writing or drawing.
Be careful not to rest your hand on the screen while you’re writing or drawing. Use a
little more pressure when writing.
Troubleshooting 235
When I write numbers, phone numbers, dates, or times, the
MessagePad interprets them as words.
The Shape recognition setting ß cleans up your shapes. If you don’t want the
MessagePad to do this, select the Sketches recognition setting ‚.
My writing doesn’t appear under the tip of the pen.
m Realign the pen. Tap Extras E to open the Extras Drawer. Tap Prefs π and, in
the slip that appears, tap Handwriting Recognition „. In the slip that appears,
tap Align Pen. Follow the instructions on the screen.
m The option to insert new words at the caret may be turned on. Tap the
Recognition button Ú, tap Preferences, then tap Options. Tap Editing Settings.
Tap the checkbox next to “Insert new words at caret.”
m If pen alignment remains a problem, try resetting your MessagePad.
I can’t write all of my information on a line
Sometimes a line is too short or your handwriting is too large to let you fit all your
information on one line. If so, in some areas you can write on the screen and use the
caret to place the information where you want it. Follow these steps:
1 Tap the Recognition button Ú and in the list that appears, tap Preferences π.
2 Tap Options and in the list that appears, tap Text Editing Settings.
3 Tap the checkbox next to “Insert new words at caret,” to select it.
4 Tap every X until you return to the application you were using.
5 Tap on a line to place the caret ^.
6 Write the information you want. It is placed at the caret.
236 Chapter 12
Modems and cellular telephones
A message says my modem is not responding or warns about using
digital lines.
m If you are using an external fax modem, check to make sure the batteries in the
modem are good.
m If you are using a PC card fax modem, make sure the modem is inserted properly
in the card slot.
m Check all of the cable connections. Make sure you are using a standard analog
phone line and you are getting a dial tone. Reset your MessagePad.
My cellular phone and modem don’t seem to work.
m Press the Power button once and wait for 30 seconds for the system to reset.
m If you’ve recently replaced the batteries, press the Reset button.
m Make sure that each battery’s + and – terminals are positioned properly. Make
sure the batteries are fresh.
m If you’ve connected a power adapter to the MessagePad, make sure it’s plugged
into a working outlet. If it’s plugged into a power strip, make sure the power strip
is turned on.
m Follow the resetting procedures listed earlier in this chapter.
Troubleshooting 237
My batteries don’t last as long as they used to.
m Setting the MessagePad to receive beams automatically uses extra battery power.
m The more you use peripherals for faxing, mailing, and printing, the faster the
batteries lose power.
m If you’re using an optional rechargeable battery pack, it may have reached the end
of its life. Dispose of it safely and legally and get a new one.
Important Use only alkaline batteries or a rechargeable battery pack designed for
your MessagePad.
m The more you use backlighting (or have it turned on), the faster the batteries use
power. Turn off backlighting when you don’t need it. You can also change the
backlighting preferences. See “Prefs” in Chapter 5, “Managing the MessagePad 2100.”
The batteries leaked and my MessagePad won’t work.
Electronic mail
There is no dial tone.
m Make sure that your modem has adequate power from batteries or a power
adapter and that it is connected to a working telephone line.
m You may be using a phone system that does not generate a dial tone (as is the case
with some analog PBX systems). In the Modem preferences slip, make sure the
checkbox next to “Require dial tone” is not checked.
The local access number won’t answer.
Make sure that the number you are dialing is correct and appropriate for your
location. If you need to dial a number to get an outside line, enter that number,
followed by a comma, before the access phone number.
I lost the connection while transmitting.
Make sure you turn off call waiting while using the modem. Contact your local phone
company if you need instructions.
238 Chapter 12
When I try to connect, my modem doesn’t dial or I get a “Please wait”
message.
Press the Reset button on the back of the device, then try connecting again.
The MessagePad says “No modem is connected” when my Newton-
compatible fax modem is connected.
If your modem has batteries, make sure they are fresh and properly installed. Make
sure your phone is on the hook.
Make sure you’ve entered information for an owner and worksite. Tap Extras E, tap
the folder tab, tap Setup, and tap Owner Info 8.
The MessagePad dialed the wrong number.
m Make sure you’re using the appropriate calling options for the phone from which
you are placing the call.
m The MessagePad’s dialing feature does not work with all phones. Some phones,
such as PBX phones, do not recognize the tones of the MessagePad’s speaker.
Troubleshooting 239
The phone is not dialing the correct phone number when I use the
speaker to dial.
m Try changing the distance between the phone handset and the MessagePad’s
speaker. Try changing the orientation of the phone handset and the
MessagePad’s speaker.
m You can also try using different phones or a different phone system.
Extra numbers appear in the phone number I’m trying to call.
m Make sure the following settings are correct: Time/Date settings in Clock C, Time
Zones z, and Locale © in Prefs π.
m Verify that the local dialing information area code is correct for the location you
are dialing.
Beaming
I’m not getting items that are beamed to me.
m Make sure the infrared windows on the Newton devices are pointing directly at
each other and are less than 1 meter (about 3 feet) apart—closer in bright sunlight.
m You may not have chosen to receive beams automatically. To receive beams
automatically, go to the InOut Box I, tap the Information button ; and, in the list
that appears, tap Beam Prefs. Tap the checkbox next to “Receive beams automatically.”
Other
The MessagePad has gotten wet.
m If the MessagePad gets wet while it’s plugged in using a power adapter, unplug the
power adapter from the MessagePad before you do anything else.
m Remove the main batteries and allow the unit to dry for at least 24 hours at room
temperature. Don’t place the device in an oven or microwave oven.
240 Chapter 12
The time or date is wrong.
m Tap Extras E, tap the folder tab, then tap Unfiled Icons. (If you filed Clock in
another folder, tap that folder’s name.) Tap Clock C, then tap Set. In the list that
appears, tap Time/Date, then set the correct date and time.
m The MessagePad’s clock may lose time when you press the Reset button. Check
the time and date in Clock C whenever you press Reset.
Many of my items seem to be missing.
When a lot of information is stored in an area, the MessagePad may take a few
seconds to display it.
I want to erase everything stored in the MessagePad.
Troubleshooting 241
Appendix A
Installing and Replacing Batteries
Your MessagePad 2100 uses:
m four AA alkaline batteries or a Newton Rechargeable Battery Pack
m a super capacitor as a backup power source
To see the battery level indicator, tap Extras E to open the Extras Drawer. At the
bottom of the screen on the right side, you see the battery level.
The black portion of the gauge shows the remaining battery power.
243
Battery warnings
When you first see the warning, you have less than an hour of power left in
your batteries.
If you don’t change the batteries in time, the MessagePad turns itself off automatically
to save the information in its memory. You can turn the MessagePad back on once
you’ve replaced the batteries or plugged in a power adapter.
Rechargeable batteries
You can use a Newton Rechargeable Battery Pack instead of alkaline batteries. Use
only the battery pack designed for your MessagePad. Follow the instructions that
come with the battery pack.
If you buy a rechargeable battery pack, you also need a Newton 9W Power Adapter.
When the MessagePad is plugged in, the battery pack recharges automatically.
244 Appendix A
Replacing batteries
246 Appendix A
3 Install four AA batteries in the battery compartment.
Make sure you position each battery’s + and – terminals according to the diagram in
the compartment (the batteries don’t all have the same orientation). If you install the
batteries the wrong way, they may leak and damage your MessagePad. Leaking
batteries may be hazardous.
m Batteries are inherently hazardous due to internal caustic materials and high
energy levels. For this reason, always handle batteries carefully. Do not drop,
puncture, disassemble, mutilate, or incinerate batteries. Don’t put batteries in
your mouth.
m Do not leave batteries in hot places.
m Use only alkaline AA batteries or the Newton Rechargeable Battery Pack designed
for your MessagePad. The battery indicator doesn’t work with other types of
batteries, and your MessagePad can run out of power with little or no warning.
m Always turn off the MessagePad before changing the batteries, to minimize the
chance of losing your information.
m Do not short-circuit battery terminals—that is, do not touch both terminals with a
metal object at the same time. Doing so may cause an explosion or a fire.
m Do not install both old and new AA batteries; replace all four alkaline AA batteries
at the same time to ensure optimum battery life.
m To avoid battery leakage or lost data, replace the batteries as soon as they
become weak.
m In normal circumstances, turn off the MessagePad only by using the Power switch
to avoid losing information.
m If you expect to store the MessagePad for a prolonged period, it’s a good idea to
remove the batteries to prevent leakage during storage.
248 Appendix A
Appendix B
Service and Support
Apple User Assistance
If you need assistance, Apple’s trained staff members are ready to help you.
To contact Apple User Assistance in the United States, refer to your Apple Support
Card for detailed information.
m In Australia, call 1-300-300-995
m In Canada, call 1-800-263-3394
m In the United Kingdom, call FREE 0800-639866
Outside the countries listed above, contact your local Apple-authorized reseller.
249
Extended service agreement
Many Apple-authorized resellers offer an extended service agreement at the time you
purchase your MessagePad, or at any time during the warranty period, to cover
repairs after your warranty expires.
You may also purchase AppleCare, Apple’s extended service agreement, from an
Apple-authorized reseller or from Apple through AppleCare Direct. AppleCare offers
up to 36 months of the same protection as the original Apple One-Year Limited
Warranty, beginning when your warranty expires.
If your warranty has expired and you have not purchased an extended service
agreement, you can contact an Apple-authorized service provider or Apple for repair
services. Nonwarranty repair charges are usually based on an hourly service rate plus
the cost of parts.
250 Appendix B
Appendix C
Compatibility Information
Your MessagePad uses the Newton 2.1 operating system. You can beam and mail
items and share storage cards between another Newton device with the Newton 2.0
or 2.1 operating system and your MessagePad.
There are some limitations, however, when you are beaming or mailing items from
your MessagePad to a Newton device that has an earlier version of the Newton
operating system. There are also some limitations when a device with an earlier
version of the Newton operating system is beaming or mailing items to your
MessagePad. You may also run into problems when using storage cards in devices
with different versions of the Newton operating system.
The next few pages show you the details of compatibility between your MessagePad
and devices with an earlier version of the Newton operating system.
251
Newton 2.1 OS to Newton 2.0 OS Feature compatibility
Beaming
Faxes Yes
Icons (application packages) Yes
Name Cards
m Person Yes
m Company Yes
m Group Yes
Owner Cards Yes
Worksite Cards Yes
Beam My Card Yes
Calls Yes
Meetings Yes
To Do Tasks Yes
Checklists and Outlines Yes
Notes Yes
Mailing
Faxes Yes
Calls Yes
Icons (application packages) Yes
Name Cards Yes
Meetings Yes
To Do Tasks Yes
Storage cards
Interchangeability Yes
252 Appendix C
Newton 2.1 OS to an earlier Newton 1.x OS
Beaming
Faxes No
Icons (application packages) No
Name Cards
m Person Yes (no 2.0 info, no ink text)
m Company Yes (no 2.0 info, no ink text)
m Group No
Owner Cards Yes
Worksite Cards No
Beam My Card No
Calls No
Meetings Yes (no 2.0 info)
To Do Tasks Yes (no 2.0 info)
Checklists and Outlines Yes (converted to note with tabs)
Notes Yes (ink text converted to sketch with some
formatting loss)
Mailing
Faxes No
Calls No
Icons (application packages) No
Name Cards Yes (no 2.0 info, no ink text)
Meetings Yes (no 2.0 info)
To Do Tasks Yes (no 2.0 info)
Storage cards
Interchangeability No
254 Appendix C
Appendix D
Printer Compatibility
You can use your MessagePad to print information on many kinds of printers.
In general you can use the following types of printers:
m Apple personal printers connected serially, including the StyleWriter I and II
printers; the StyleWriter 1200; the StyleWriter 1500; the Color StyleWriter 2200,
2400, 2500, 4500, and 6500; the Personal LaserWriter 300; and the Personal
LaserWriter LS.
m Apple network printers (PostScript printers connected using AppleTalk), including
the LaserWriter 360 and most other LaserWriters.
m If you have the Newton Print Pack, printers using a parallel (Centronic-type)
interface, such as the Epson LQ, Epson FX, HP Deskjet, HP DeskWriter, HP
LaserJet, Canon BubbleJet, Portable StyleWriter, and printers that emulate them.
m Printers that use the Infrared connection, such as the HP LaserJet 5MP, and HP
DeskJet 340.
The following is a specific list of Apple printers that work with your MessagePad:
255
Printer Connection
256 Appendix D
You can also use the following printers via Infrared connection:
Printer Connection
Printer Connection
259
Using the Newton keyboard
You can use the Newton keyboard to enter information in any area that accepts text.
1 Turn on your MessagePad.
2 Go to the application where you want to enter information (such as the Notepad).
3 Tap the MessagePad pen on the screen where you want the text to be placed.
A caret appears.
Caret
260 Appendix E
Care and maintenance
m Keep your keyboard away from extreme heat.
m Don’t leave your keyboard anyplace that is extremely dusty, damp, or wet.
m Don’t place heavy objects on the keyboard.
m Take care not to spill any liquid on your keyboard. If you do, turn off your
MessagePad immediately. Unplug the keyboard and tilt it to let the liquid drain
out. Let the keyboard dry for 24 hours at room temperature.
263
application programs. See also icons backlighting feature
application cards and 209 batteries and 148, 238, 247
backdrop and 35, 110, 111 sleep and 147
deleting 113 troubleshooting and 231, 238
in Extras Drawer 116–158 batteries 243–248
Calculator 117 backlighting and 148, 238, 247
Calls 117–122 beaming and 183, 238
Card 122 checking status of 109, 243
Clock 123–124 illustration of 247
Dock 125–129 installing 245–247
Formulas 129–132 life of 247
Help 133 low-level warning 244
Handwriting Instructor 34, 134 rechargeable 238, 244, 245
InOut Box 134–137 replacing in MessagePad 245–247
Newton Tour 138 replacing in storage cards 208
Owner Info 138–141 tips for 248
Prefs 142–150 troubleshooting 237–238
Setup 150–151 warning about 245
Styles 152 beamed information
Time Zones 153–157 receiving automatically 183, 238
Writing Practice 34, 158 receiving manually 183
memory used by 108, 112, 233 sending 182
moving 112, 113 viewing 184
Newton Book Reader 215–227 beaming
personal information management battery power and 183
Date Book 69–104 events 101
Name File 49–67 icons 113
Notepad 35–48 items in Notepad 48
rotating screen and 115 meetings 101
selecting 112, 113 name cards 65
Assist button 177, 193–200 to other Newton devices 180–184
Auto Dock, preferences for 150 setting preferences for 180–181
to-do tasks 101
B troubleshooting 240
beams. See beamed information; beaming
backdrop birthday field 52, 59
changing 110–111 blinking star
default 35, 110 Recently Written Word list and 30
Extras Drawer as 110 routing and 191
Notepad as 35, 110 Bookmark button 220, 221
backing up information to storage card bookmarks, Newton books 220–222
211–213
264 Index
Book Reader application. See Newton Book cellular telephones 237. See also Calls
Reader application application; modems;
built-in applications 116–158 telephone calls
built-in microphone, recording with 43 changing
Business folder 160 appearance of name cards 60
buttons. See individual buttons backdrop 110
batteries in MessagePad 245–247
C batteries in storage cards 208
fonts in text and drawings 11–12
cables xii, 127 information on existing cards 54
calculations, copying 117 layout of on-screen keyboard 14
Calculator application 117 length of meetings 95–96
Calendar 70–96. See also Date Book; line thickness in drawings 11–12
To Do List owner information 140
deleting items in 102 paragraph margins 27
duplicating meetings or events in 92–93 passwords 144
moving around in 86–91 priority of to-do tasks 99
moving items in 94–95 screen contrast 109
scheduling meetings and second time zone 153–154
events in 71–85 size and shape of drawings 11–12, 23
using the alarm 84 sleep time 147
viewing items in 91–92 text formatting 23–24
calendar alarm, preferences for 147 when PIN is entered 144
Call request word 196 worksite information 140
calls. See telephone calls character spacing, handwriting recognition
Calls application 117–122. See also and 2
modems; telephone calls checklist stationery 38–42
deleting calls 121 cleaning
filing logged entries of calls 122 case xii
placing calls 118–120 Newton Keyboard 261
setting preferences in 122 pen xii
viewing calls 121 screen xi
capitalizing words 26, 29 Clipboard, copying items in 21, 22
Card application 122 Clock application 123–124
cards. See accessory cards; application cards; closing
name cards; storage cards Date Book 69
card slots xii, 201 Extras Drawer 106
caret (^) compatibility information
inserting punctuation with 25–26 other Newton devices 251–254
inserting words or spaces with 6, 13 printers 255–257
case, care of xii
Index 265
connecting recording notes 43–44
MessagePad to desktop to-do tasks 97–98, 101
computers 125–129 worksite for MessagePad 140
MessagePad to modems 185 Currency Exchange formula 131
MessagePad to printers 169 Cursive handwriting style 4–5
Newton Keyboard 259 customer support. See help, sources of
connection, setting preferences for 125–126 custom field labels, creating 53–54
connectors xii
contrast, screen 109 D
controls, in Newton Book Reader 219–227
converting daily alarm 123, 146
currencies 131 date
dates 132 setting 124
handwriting to text 20 troubleshooting 241
ink text to text 234 Date Book 69–104
measurements 129, 130 Calendar 70–96
copying closing 69
calculations 117 deleting items in 102
drawings 21 memory and 102
events 92–93, 101 moving around in 86–91
items 21, 48, 254 moving items in 94–95
meetings 92–93, 101 opening 69
name cards 65 setting preferences for 103–104
parts of a Newton book 222–225 To Do List 96–102
text 21 viewing items in 91–92
to-do tasks 101 Date Calculator formula 132
correcting misinterpreted words 17–18 Date Conversion formula 132
Corrector button 17, 18 deleting
creating application programs 113
checklists 38–40 bookmarks 221–222
custom field labels 53–54 calls 121
documents 37 cities from time zones 155
drawings 37 documents 113
folders 162, 163 entries from group address 56
items in Notepad 35–44 events 102
meetings 101 everything stored in MessagePad 241
name cards 50–51, 55–56, 58 folders 162, 163
notes 37 icons 113
outlines 38–40 information on storage cards 207–208
owner for MessagePad 139–140 items 48, 102
266 Index
meetings 102 deselecting 19
name cards 65 formatting 23–24
text and drawings 15–16, 235 modifying 23
to-do tasks 100, 102 moving 21–22
words in personal word list 29 printing 171–172
deselecting text and drawings 19 selecting 19
desktop computers, connecting MessagePad setting styles for 11–12
to 125–129 duplicating
dialing calculations 117
letters in telephone numbers 66 drawings 21
manual 177 events 92–93, 101
PBX phones and 65 items 21, 48, 254
telephone numbers from Name File meetings 92–93, 101
65–67 name cards 65
troubleshooting 238, 239–240 parts of a Newton book 222–225
dictionary 2, 7, 191. See also personal word text 21
list to-do tasks 101
Dictionary button 28
digital telephone lines, warning about 65 E
display. See screen
Dock application 125–129 electronic mail 185–189. See also mailing
documents. See also icons; items forwarding 189
deleting 113 preparing to send and receive 185–186
moving 12, 113 receiving 187
printing 171–172 replying to 189
selecting 112, 113 sending 186–187
downloaded packages 189 sending items via 48, 65, 101, 115
drawing troubleshooting 238–239
erasing 15–16 viewing 188–189
notes and 35, 36, 37 entries in group address 56
“scrubbing out” 15–16 equipment, care of xi–xiii, 261
troubleshooting 234–236 erasing. See deleting
drawings. See also items error messages 232–233
changing fonts in 11–12 events
changing line thickness in 11–12 adding notes to 83–84
changing shape sizes in 11–12 annual 81–83
copying 21 beaming 101
default alarm time for 104
Index 267
deleting 102 fax modem. See faxes; faxing; modems
duplicating 92–93, 101 Fax request word 196
e-mailing 101 field labels, custom 53–54
faxing 101 files. See documents; drawings; items
multiday 79–81 filing
scheduling 77–83 icons in Extras Drawer into folders
viewing 91, 92 112, 161–162
expanding words 31–33 information on storage cards 205
extended service agreement 250 items into folders 159–161
Extensions folder 107 logged call entries 122
Extras Drawer multiple items 160–161
applications contained in 116–158 Find button 164
closing 106 finding information 164–167, 233
filing icons into folders 112, 161–162 Find request word 196
managing 106–115 Fine Tuning option 9
opening 106 Folder button 112, 160, 162, 163
routing applications in 112 folders
using as backdrop 110 creating 162, 163
viewing items in 112 deleting 162, 163
in Extras Drawer 106–107
F filing icons from Extras Drawer into
112, 161–162
faxes. See also faxing; fax modem; modems filing items into 159–161
manual dialing and 177 global 159–160
preparing to send and receive 173–175 limit on 160
receiving 178 local 159–160
replying to 180 organizing information in 159–163
scheduling 175 renaming 162, 163
sending 175–177 viewing items by 162
viewing 178–180 fonts
faxing 173–180. See also faxes; fax modem; changing in text and drawings 11–12
modems Styles application and 152
Assist and 177 forgetting passwords 232
events 101 formatting
items in Notepad 48 drawings 23–24
meetings 101 storage cards 203–204
name cards 65 text 23–24
Newton books 227 Formulas application 129–132
preferences for 174–175 forwarding electronic mail messages 189
to-do tasks 101
troubleshooting 239
268 Index
G I, J
Index 269
Ink Text recognition setting 3 K
InOut Box 134–137
routing items in 190 keyboard
setting preferences for 134–135 care of 261
inserting Newton Keyboard 259–261
accessory cards 201–202 on-screen keyboards 13–15
application cards 201–202 spills on 261
punctuation in text 25–26 using 261
spaces in text 13, 23–24 Keyboard button 14, 17, 18, 28
storage cards 201–202
words in text 6, 13 L
installing batteries 245–247
IrDA data transmission landscape mode, screen 115
connecting MessagePad to desktop “Learn my handwriting” option 7
computer via 128–129 letter-by-letter recognition 7
connecting printers to MessagePad via Letter Shapes option 8
255, 257 lid xi
items. See also documents; lines
drawings; stationery changing thickness of in drawings
beaming in Notepad 48 11–12, 152
copying 21, 48 selecting in text and drawings 19
creating in Notepad 35–44 Loan Payment formula 130
deleting in Notepad 48 locale preferences 144
duplicating in Notepad 48 local folders 159–160
e-mailing in Notepad 48 LocalTalk box 169
faxing 48, 175–177 LocalTalk connection 256
filing into folders 159–161 locking storage cards 208
getting information about 46–47
missing 241 M
moving in Date Book 94–95
mailing. See also electronic mail
moving in Extras Drawer 112, 113
events 101
moving on screen 21–22
items in Notepad 48
printing 171–172
meetings 101
routing in InOut Box 190
name cards 65
selecting 19, 112, 113
to-do tasks 101
viewing by folder 162
Mail request word 197
viewing in Date Book 91–92
manual dialing, faxes and 177
viewing in Extras Drawer 112
margins, changing 27
viewing in Notepad 45–46
Mark Page button 220
joining words 23–24
270 Index
Markup button 226 troubleshooting 229–241
measurements, converting 129, 130 turning on 237
meetings MessagePad pen
adding notes to 83–84 care of xii
beaming 101 copying items with 21
changing length of 95–96 deselecting items with 19
creating 101 moving items with 21–22, 112, 113
default alarm time for 103–104 placing caret (^) with 6
deleting 102 selecting items with 19, 112, 113
duplicating 92–93, 101 messages
e-mailing 101 alert 232–233
faxing 101 recording 43–44
moving 94–95 Metric Conversion formula 130
scheduling overlapping meetings 85 Microsoft Windows operating system,
scheduling single meeting 71–74 AppleTalk and 128
scheduling weekly meetings 74–77 minicalendar 86, 88
viewing 91, 92 minute timer 124, 147
memory. See also storage cards Miscellaneous folder 160
applications and 108, 112, 233 modems. See also faxes; faxing
checking 109 connecting MessagePad to 185
Date Book and 102 connecting MessagePad to desktop
personal word list and 29 computer via 127–128
troubleshooting 232, 233 preferences for 149
MessagePad troubleshooting 237, 238–239
care of xi–xiii warning about connecting to digital
compatibility information 251–254 phone lines 65
connecting to desktop computers modifying drawings 23
125–129 moving
connecting to printers 169 applications 112, 113
creating owner for 139–140 documents 112, 113
creating worksite for 140 drawings 21–22
erasing everything stored in 241 icons 112, 113
getting wet xiii, 240 items in Date Book 94–95
managing 105–158 items in Extras Drawer 112, 113
placing calls with 66–67 items on screen 21–22
printers used with 255–257 on-screen keyboard 14
resetting 230–231, 232 text 21–22
sleep and 147–148 multiday events, scheduling 79–81
teaching to recognize abbreviations multiple items, filing 160–161
31–33
Index 271
N table of contents in 218
using bookmarks in 220–222
name cards. See also Name File viewing 215–227
adding information to 52–54 Newton InterConnect port 44, 145, 169, 259
adding notes to 61 Newton Keyboard 259–261
beaming 65 Newton 9W Power Adapter
changing appearance of 60 moisture and xiii
changing information on 54 rechargeable battery pack and 244
creating 50–51, 58 Newton operating system
creating for group addresses 55–56 birthday field and 59
custom field labels in 54–55 compatibility information 251–254
deleting 65 storage cards and 204–205
duplicating 65 Newton Rechargeable Battery Pack 244
e-mailing 65 Newton Serial Adapter xii, 169
faxing 65 Newton Tour 138
filing 159–161 Notepad 35–48
previewing 64 beaming items in 48
printing 63 creating new item in 35–44
routing 65 as default backdrop 35, 110
viewing notes on 62 deleting items in 48
Name File 49–67. See also name cards displaying 35
closing 49 duplicating items in 48
dialing telephone numbers from 65–67 e-mailing items in 48
opening 49 faxing items in 48
printing name cards in 63–64 getting information about items in 46–47
setting preferences for 62–63 setting preferences for 47
viewing 56 viewing items in 45–46
navigating in Date Book 86–91 notes
Net Present Value formula 131 adding to meetings or events 83–84
networks, printers and 172, 239, 255, 257 adding to name cards 61
new folders, creating 162, 163 creating 37
Newton Book Reader application 215 filing 159–161
Newton Book Reader controls 219–227 printing in Name File 63–64
Newton books recording messages and sounds in 43–44
annotating 226 sorting 57–59
copying parts of 222–225 viewing on name cards 62
faxing 227 notes to name cards 61
opening 216
printing 227
routing 227
272 Index
O pen
care of xii
on-screen help copying items with 21
accessing with Assist 199–200 deselecting items with 19
Help application 133 moving items with 21–22, 112, 113
on-screen keyboards 13–15, 25 placing caret (^) with 6
opening selecting items with 19, 112, 113
Date Book 69 Personal folder 160
Extras Drawer 106 Personal Identification Number (PIN)
Newton books 216 changing password 144
Options button, handwriting recognition changing when entered 144
preferences 6–9 entering 143
organizing information 159–163 forgetting 232
Out Box, viewing items in 137 not recognized 232
outline stationery 38–42 setting 142–143
Overview button 45, 56, 91, 112, 115. personal word list 6, 28–33.
See also viewing See also dictionary
Owner Info application 138–141 Phone button 66
phone calls. See telephone calls
P, Q Picture button 46
PIN. See Personal Identification
packages, downloaded 189 Number (PIN)
Page Number button 219 placing calls 66–67, 118–120
pages pop-up lists, word 17–18
marked 221 portrait mode, screen 115
viewing in Newton books 217 ports
paper size, printing and 170 handling xii
parallel interface 169 Newton Interconnection port 44, 145,
passwords 169, 259
adding 142–143 serial 127, 255, 256, 257
changing 144 PostScript printers, using with
forgetting 232 MessagePad 255
removing 144 power adapter
saving 125 moisture and xiii
pauses in writing 2 Newton 9W Power Adapter xiii, 244
PBX phones, dialing feature and 65 troubleshooting 237
Index 273
Power button, turning on MessagePad setting preferences for 170
with 237 troubleshooting 239
preferences Printing handwriting style 2, 4–5
alarm 103–104, 146–147 Print request word 197
Auto Dock 150 problems. See troubleshooting
beam 180–181 programs. See application programs
Calls application 122 punctuation 10, 25–26
connection 125–126 putting away beamed icons 114
Date Book 103–104
fax 174–175 R
handwriting recognition 4–9, 148
InOut Box 134–135 receiving
locale 144 beamed information 183, 238
modem 149 electronic mail messages 187
Name File 62–63 faxes 178
Notepad 47 Recently Written Words list 30
Owner Info 141 rechargeable batteries, using with
Prefs application 142–149 MessagePad 238, 244, 245
print 170 Recognition button 3, 4
recording 44, 145 recording messages and sounds 43–44
security 142–144 recording preferences 44, 145
sleep 147–148 Remember request word 197
sound 145 removing
word spacing 5 accessory cards 201–202
Preferences recognition setting 3 application cards 201–202
Prefs application 142–150. password 144
See also preferences storage cards 201–202
printers. See also printing words from personal word list 29
compatible with MessagePad 255–257 renaming folders 162, 163
connecting MessagePad to 169 repeating to-do tasks 102
incompatible with MessagePad 257 replacing
networked 170, 172 batteries in MessagePad 245–247
parallel interface and 169 batteries in storage cards 208
selecting 171–172 replying to electronic mail messages 189
printing 169–172. See also printers request words 196–198
choosing paper size 170 resetting MessagePad 230–231, 232
items 171–172 restoring information from storage cards
name cards in Name File 63–64 213–214
Newton books 227 revising words 30
preparation for 170 Rotate button 115
274 Index
rotating screen 115 icons 112, 113
routing. See also beaming; copying; items 19, 112, 113
electronic mail; faxing; printing printers 171–172
applications in Extras Drawer 112 text 19
information 169–191 sending
items in Date Book 101 beams 182
items in InOut Box 190 electronic mail messages 186–187
items in Notepad 48 faxes 175–177
name cards 65 serial cables
Newton books 227 connecting MessagePad to desktop
preferences for 135 computer via 127
Routing button 48, 65, 101, 112, 227 connecting printers to MessagePad via
255, 256
S service 249–250. See also help, sources of
setting
scaling ink text 6 bookmarks 220
Schedule request word 197 current time zone 153
scheduling daily alarm 123
annual events 81–83 date 124
events 77–83 minute timer 124
faxes 175 Personal Identification Number (PIN)
multiday events 79–81 142–143
overlapping meetings 85 screen contrast 109
single meeting 71–74 second time zone 153–154
weekly meetings 74–77 styles for text and drawings 11–12
screen tabs 27
care of xi time 124
rotating 115 time zones 153–154
setting contrast of 109 volume 109
troubleshooting 213 where information is stored 107–108
“scrubbing out” setting preferences
drawings 15–16 alarm 146–147
misinterpreted words 17 Auto Dock 150
problems with 235 beam 180–181
text 15–16, 17 connection 125–126
security preferences 142–144 Date Book 103–104
selecting default alarm times 103–104
applications 112, 113 faxing 174–175
documents 112, 113 handwriting recognition 4–9, 148
drawings 19 InOut Box 134–135
Index 275
locale 144 speakers
modem 149 dialing through 67
Name File 62–63 sound preferences and 145
Notepad 47 special characters, typing 15
Owner Info 141 SRAM (static-random access memory)
phone 122 cards 203
print 170 star. See blinking star
recording 44, 145 stationery, Notepad and 35–44
routing 135 storage cards. See also memory
security 142–144 backing up information to 211–213
sleep 147–148 Card application and 122
sound 145 changing batteries in 208
word spacing 5 checking space on 206
settings, handwriting recognition 3, 4–9 deleting information on 207–208
setting up earlier versions of operating system and
guest users 34 204–205
printers 170 filing information on 205
sending and receiving electronic mail formatting 203–204
185–186 inserting 201–202
sending and receiving faxes 173–175 locking 208
Setup application 150–151 preparing a new storage card 203–204
Setup folder 107 removing 201–202
shapes, changing size of in drawings 11–12 replacing batteries in 208
Shapes recognition setting 3 restoring information from 213–214
single meetings, scheduling 71–74 storing information on 107–108, 206
Sketches recognition setting 3 troubleshooting 232
sleep feature 147–148 unlocking 208
slips 50, 51 using 203–208
software. See application programs write-protection of 233
software reset 232 Storage folder 107
sorting name cards 57–59 storing information 107–108, 206
sound styles
preferences for 145 handwriting 4–5
recording 43–44 setting for drawings 11–12, 152
spaces, inserting in text 13, 23–24 setting for text 11–12, 152
spacing, word 5 Styles application 152
support 249–250. See also help, sources of
symbols, typing 15
276 Index
T to-do tasks 97–98
beaming 101
table of contents, Newton books 218 changing level of 99
tabs, indenting paragraphs with 27 completing 100
Tag button 179, 180 creating 97–98, 101
tasks, to-do 97–98. See also To Do List deleting 100, 102
telephone calls. See also Calls application; duplicating 101
modems e-mailing 101
deleting 121 faxing 101
dialing from Name File 65–67 repeating tasks 102
filing 159 troubleshooting 229–241. See also help,
placing 118–120 sources of
viewing 121 alert messages 232–233
text batteries 237–238
adding punctuation to 25–26 beaming problems 240
changing fonts in 11–12 cellular telephones 237
converting handwriting to 20 date 241
converting ink text to 234 dialing 239–240
copying 21 drawing 234–236
deleting 15–16 electronic mail 238–239
deselecting 19 faxing 239
erasing 15–16 finding information 233
finding 164–167 handwriting recognition 10, 234–236
formatting 23–24 memory 29, 232, 233
inserting space in 13, 23–24 MessagePad gets wet xiii, 240
moving 21–22 modems 237, 238–239
“scrubbing out” 15–16, 17 passwords 232
selecting 19 Personal Identification
setting styles for 11–12, 152 Number (PIN) 232
troubleshooting 241 power adapter 237
Text Editing Settings option 6 printing 239
Text recognition setting 3 resetting the MessagePad 230–231
time, setting 124 screen 213
Time request word 198 solutions to common problems 229–241
Time Zones application 153–157 storage cards 232
titles. See application cards time 241
To Do List 96–102. See also Calendar; turning on MessagePad 237
Date Book writing 234–236
completing tasks 100 turning on MessagePad 237
creating tasks 97–98 tutorials, Handwriting Instructor 34, 134
deleting tasks 100, 102
duplicating tasks 101
viewing 99
Index 277
U W, X, Y, Z
278 Index
MessagePad 2100
User’s Manual
K Apple Computer, Inc.
© 1997 Apple Computer, Inc. All rights reserved.
1 Infinite Loop
Cupertino, CA 95014-2084
408-996-1010
http://www.apple.com
Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for
printing or clerical errors.
Apple, the Apple logo, AppleCare, AppleTalk, Imagewriter, LaserWriter, LocalTalk, the Light bulb logo, Macintosh,
MessagePad, Newton, and StyleWriter are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
Adobe, Adobe Illustrator, Adobe Photoshop, and PostScript are trademarks of Adobe Systems Incorporated,
which may be registered in certain jurisdictions.
Centronics is a registered trademark of Centronics Data Computer Corporation.
DeskJet, HP, and LaserJet are registered trademarks of Hewlett-Packard Co.
Epson is a registered trademark of Seiko Epson Corp.
Exposure is a registered trademark of Preferred Publishers, Inc.
Helvetica is a registered trademark of Linotype-Hell AG and/or its subsidiaries.
Microsoft is a trademark, and Windows is a registered trademark, of Microsoft Corp.
QuarkXPress is a registered trademark of Quark, Inc.
This product is powered by Advanced RISC Machine’s high performance, power efficient, 32-bit RISC
microprocessor.
For more information:
m USA: 408-399-5199
m UK: 44-223-400400
m Japan: 81 44 850 1301
m marketing@armltd.co.uk
Simultaneously published in the United States and Canada.
Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor
a recommendation. Apple assumes no responsibility with regard to the performance or use of these products.
Contents
Communications regulation information viii
Preface Safety, Care, and Maintenance xi
iii
Getting information about a specific item 46
Setting Preferences for the Notepad 47
Faxing, beaming, mailing, duplicating or deleting items 48
3 Using the Name File 49
Creating a new name card for a person or company 50
Adding information to a card 52
Changing information on an existing card 54
Creating a card for a group address 55
Viewing the name file 56
Sorting name cards 57
Changing a card’s appearance 60
Adding and viewing notes 61
Setting Names preferences 62
Printing cards in the Name File 63
Faxing, beaming, mailing, duplicating, or deleting cards 65
Dialing telephone numbers 65
4 Using the Date Book: Calendar and To Do List 69
Summary of the Calendar 70
Scheduling meetings and events 71
Scheduling overlapping meetings 85
Viewing items in the Date Book 91
Duplicating meetings or events 92
Moving items in the Date Book 94
Using the To Do List 96
Other ways to create meetings and to-do tasks 101
Faxing, beaming, mailing, and duplicating meetings, events, and to-do tasks 101
Sending repeating to-do tasks 102
Deleting meetings, events, and to-do tasks 102
Setting preferences for the Date Book 103
iv Contents
5 Managing the MessagePad 2100 105
Part 1: Managing the Extras Drawer 106
Setting where new information is stored 107
Checking memory used in built-in applications 108
Checking battery status, setting contrast and volume 109
Changing the backdrop 110
Viewing items in the Extras Drawer 112
Selecting, moving, and deleting icons 112
Beaming icons 114
Sending icons by electronic mail 115
Rotating the screen 115
Part 2: Using the Built-In Applications 116
Calculator 117
Calls 117
Card 122
Clock 123
Dock 125
Formulas 129
Help 133
HW Instructor 134
InOut Box 134
Newton Tour 138
Owner Info 138
Prefs 142
Setup 150
Styles 152
Time Zones 153
Writing Practice 158
Contents v
6 Organizing and Finding Information 159
Organizing information 159
Finding information 164
7 Routing Information 169
Printing 169
Faxing 173
Sending and receiving beamed information to Newton devices 180
Using electronic mail 185
Routing items in the InOut Box 190
Using the blinking star notification 191
8 Using Assist and Accessing On-Screen Help 193
Using the Assist button 193
Accessing on-screen help using Assist 199
9 Using Storage and Application Cards 201
Inserting and removing cards 201
Using storage cards 203
Using application cards 209
10 Backing Up and Restoring Information 211
Backing up information to a storage card 211
Restoring information from a storage card 213
11 Viewing Newton Books 215
Opening a book on your MessagePad 2100 216
Viewing pages 217
Using a table of contents 218
Using Newton Book Reader controls 219
vi Contents
12 Troubleshooting 229
Resetting the MessagePad 230
The screen 231
Personal Identification Number (PIN) 232
Alert messages 232
Writing and drawing 234
Modems and cellular telephones 237
Power and batteries 237
Electronic mail 238
Printing, faxing, and dialing 239
Beaming 240
Other 240
Appendix A Installing and Replacing Batteries 243
Index 263
Contents vii
Communications regulation information
Screen care
m Take care not to break the glass screen. Don’t drop the MessagePad. Don’t subject
it to any strong impact. Don’t put it into your back pocket because, if you sit on it,
the glass may break.
m Don’t press too hard on the screen when writing, drawing, or tapping. Don’t
forcefully jab or hit the screen.
m Be careful not to scratch the screen. Use only the pen that comes with your
MessagePad. Don’t use ink pens or any other sharp object.
m Clean the screen frequently to ensure that dust and grit do not build up on the
surface. Clean the screen only with a soft cloth—such as a cloth made for cleaning
eyeglasses. Do not use strong solvents to clean the screen, although you can use
general purpose eye-glass cleaners or isopropol alcohol to remove fingerprints
and spots. Don’t pour cleaning liquids directly on the screen; apply to a cleaning
cloth before cleaning.
m When your MessagePad is not in use, keep the lid closed to protect the screen.
xi
Pen care
m Keep the tip of your MessagePad pen clean by occasionally rubbing it gently with a
soft dry cloth. Do not use solvents.
m To prolong the life of the pen and screen, use only your MessagePad pen to tap,
draw, and write.
xii Preface
m Don’t leave the device any place that is extremely dusty, damp, or wet. Dust and
moisture can damage the MessagePad and cause it to malfunction.
m If the MessagePad gets wet, remove the main batteries and allow the unit to dry
for at least 24 hours at room temperature.
m If the MessagePad gets wet while it’s plugged in with an optional Newton 9W
Power Adapter, unplug the power adapter from the MessagePad before you do
anything else.
Preface xiii
Apple Computer, Inc.
1 Infinite Loop
408-996-1010
http://www.apple.com
034-0312-A
Printed in U.S.A.