Académique Documents
Professionnel Documents
Culture Documents
CONTENT
1.Installation and uninstall................................................................................................. 3
2. Start/Stop Service........................................................................................................ 42
1
Guangda New Network
3.8 Event....................................................................................................................... 99
2
Guangda New Network
4000~10000 50000~100000 144PON:1 1000 core or above; core or above; Enterprise 64bit
Memory - 4 G; Memory -6G;
Hard Disk - 250G or Hard Disk - 500G or
The new installation means that neither the previous version of GView
server program nor MySQL database has been installed on the server. It
requires a new installation of GView server program and MySQL database.
3
Guangda New Network
4
Guangda New Network
5
Guangda New Network
6
Guangda New Network
7
Guangda New Network
8
Guangda New Network
9
Guangda New Network
10
Guangda New Network
11
Guangda New Network
12
Guangda New Network
13
Guangda New Network
14
Guangda New Network
15
Guangda New Network
16
Guangda New Network
17
Guangda New Network
18
Guangda New Network
19
Guangda New Network
20
Guangda New Network
21
Guangda New Network
22
Guangda New Network
6)Complete installation
23
Guangda New Network
24
Guangda New Network
25
Guangda New Network
26
Guangda New Network
27
Guangda New Network
28
Guangda New Network
29
Guangda New Network
30
Guangda New Network
31
Guangda New Network
Click “Yes”
32
Guangda New Network
33
Guangda New Network
Looking for the database unified upgrade script. sql, (The English version of
this Chinese version can not be displayed in the database too)
Select the last one (that is, the database unified upgrade script.
sql) ,click“Open”
Click “Yes”
34
Guangda New Network
Click “OK”
Go back to the page and click Save
35
Guangda New Network
36
Guangda New Network
37
Guangda New Network
38
Guangda New Network
39
Guangda New Network
40
Guangda New Network
Complete uninstall
41
Guangda New Network
2. Start/Stop Service
Start mode 1:
Start menu mode【this mode is running in the background, front page can
close】:
Start mode 2:
Stop GViewServer
42
Guangda New Network
3.System Funcions
Special attention:
Installation of Google Chrome browser is recommended. Please
adjust the system resolution to 1366*768; IE8~IE10 at present is
recommended
Main menu: at the top of the main interface, as shown below:
43
Guangda New Network
3.1 login
If you are logged in for the newly installed system, please use the system
default login username and password [admin admin];
If you login for the upgraded installation, please log in according to the
username and password in the original system.The correct interface after
login is as follows:
44
Guangda New Network
To ensure the normal and safe use of the system, please configure the
users and roles of the system, and add the SNMP group name used in the
network to the system.
The system fully supports decentralized and domain-based management.
Through decentralized and domain-based management, the system can
control the role with different regional data rights and different functional rights.
In order to control the security of roles and users, it is suggested to
manage roles first, create management operation roles suitable for your
company, and then create corresponding users to corresponding roles, so as
to achieve the purpose of controlling users'login rights.
Special attention:
1.Only users with user management and role management functions can
manage users and roles all over the world. Therefore, it is suggested that
user management and role management functions should be controlled in
administrators as far as possible.
2. All modified role permissions must take effect after the user restarts.
3.All users who modify the data area will not take effect until the user
45
Guangda New Network
restarts.
Users with role management privileges can select Role Management under
System Management in the main menu and go to the Role Management page
to add, delete, modify and assign roles to users:
Add roles
You can add a role by clicking "Add" in the role management interface.
Once you enter the new role management interface, you can manage the
name and function permissions of the role. As follows:
46
Guangda New Network
Functional permissions for some of the key functions of the read and write
permission control, such as: to provide button level control on the timing task,
to provide view upgrade file, add, modify, delete permission control.
Modify roles
You can check the roles that need to be modified in the role
management interface (Single election), and then click "Modify" to
modify the role's functional permissions.
Assign users
The system provides a quick entry for role assignment users. You can
check (Single election) the roles that need to be assigned to users in
the role management interface, and then click "Assign User" to assign
47
Guangda New Network
Users with “user management” privileges can select "System" under "user
management" in the main menu and enter the user management page. Users
can add, delete, modify and assign roles:
Add users
You can add a user by clicking "Add" in the user management interface.
After entering the user's new interface, you can manage the user's name,
user's basic information, user-managed areas and roles. As follows:
48
Guangda New Network
49
Guangda New Network
Special attention:
When you specify multiple roles for a user, when the user re-logs in, the
user has multiple roles of the function permissions overlap, you can see the
function overlap results by looking at the functions that the user has.
Modify user
You can check (Single election) the user who needs to be modified in the
user management interface, and then click "Modify" to modify the user's
information and data management permissions and roles.
50
Guangda New Network
Assign role
The system provides a quick entry for users to specify roles. You can
check (Single election) the users who need to specify roles in the user
management interface, and then click "Assign Role" to specify roles for the
selected users. The following figure shows:
51
Guangda New Network
Special attention:
After completing the above user management and role management, the
user can re-login to the system according to the specified role and data area
permissions displayed to prevent the user from not having the functional
permissions and data area permissions to operate.
For logged-in users, you can also use the "personal center" to modify the
basic information or password of individuals, but also in the personal center to
see their own data rights and functional rights. As follows:
52
Guangda New Network
53
Guangda New Network
Select the area node of the left tree; the right-click menu of the area node.
54
Guangda New Network
The add device area provides the following four ways to add devices with
management IP, such as: OLT, NC, optical amplifier, optical receiver;
Scan&Add Device
On the right-click menu of a group (area node) in the left tree, select
"Scan& Add Device" and enter the Scan Add Device page. You can scan and
add a device of a C-segment once through this function page. The following
55
Guangda New Network
figure:
56
Guangda New Network
57
Guangda New Network
Template import
The system provides a way to import the device list into the system
through template import, with two entries.
1. In the device management of the main menu “Import Device”function is
58
Guangda New Network
59
Guangda New Network
60
Guangda New Network
61
Guangda New Network
Device area adjustment is to adjust device from one area to another area.
the system provides two kinds of adjustment methods.
Left tree dragging (difficult operation and inconvenient batch operation)
Select the device that needs to be moved, press the left mouse button all
the time, then drag it to the destination area and release the mouse;
sometimes the destination area is not in the window, you need to scroll up
and down the mouse wheel to locate the destination area at the same time;
Batch movement
Firstly, select the area of the device that needs to be moved on the left
tree, right-click on the pop-up menu and select “Batch Move”, check the
device or grouping(area) that needs to be moved on the left tree in the new
pop-up window, select the destination area in the right tree control, and click
“OK” to perform the Batch Move.
The system provides the statistical function of area device type, device
version and the number of devices (online/offline). You can make statistics by
"device statistics" in the right-click menu of the selected area of the left tree.
62
Guangda New Network
At the first,in “System”page config the FTP server address ,as follows:
63
Guangda New Network
64
Guangda New Network
Special attention:
Users are concerned about whether the replacement equipment can be
transferred out of the original backup problem, after testing and verification
is satisfied, the specific operational requirements and precautions are as
follows:
1. The equipment is replaced at the scene, and IP is set to be replaced by
the IP of the device.
2. The network management system can see that the device is online.
3. Synchronize the device in right click state (the system updates the new
device MAC).
4. You can see all backup of the replaced device in the right-click
configuration backup recovery function.
5. If the MAC address of the replaced device already exists (maybe the
repaired device will be used in the network again, and the MAC of the
changed device in the database has not been updated or deleted), there
will be a conflict between MAC and IP. When the system deals with the
conflict, the replaced device will be deleted, so the backup file can not be
used.
The system provides global search function, which can be divided into
three main categories: grouping, device and user information.
The grouping is the area name, which supports fuzzy query, and the area
includes all the grouping names at all levels within the system.
Device search supports IP address, MAC address, device name (ONU
device is description information) and fuzzy query; device scope includes all
devices that can be managed;
User information refers to the terminal-user associated with the device
65
Guangda New Network
(CPE 、ONU) that supports the username, address, and telephone number;
Special attention:
1. If the list of search results is less, please set the search condition
more accurately.
2. The system defaults to displaying exactly matched content on the first
line of the search results list, such as IP address 192.168.10.1, the
exact matching result of the first behavior, and the fuzzy matching
result.
66
Guangda New Network
67
Guangda New Network
68
Guangda New Network
when EP3310 devices are selected by the left tree, topology, performance
monitoring, ONU list, and configuration management will appear in the TAB
page on the right boundary.
Topology
The facility panel diagram of EP3310 is presented. You can view and
operate the ports on the panel diagram. The following figure shows:
Performance monitoring:
It can start the performance monitoring collection of the device, if the
device has started the performance monitoring collection, you can view
the current and historical performance curve on this page; it can start the
performance monitoring of a board card, and it can also set the
performance monitoring parameters for each PON port; the following
figure:
69
Guangda New Network
ONU list
Display all the ONU device list information under the EP3310 device;
Configuration Management
Displays all configuration items that the NMS can configure for
EP3310 devices, i.e. advanced configuration, including: management
parameters, upper link port configuration, PON port configuration, ONU
configuration, SNMP configuration, FDB configuration, VLAN
configuration, as follows:
70
Guangda New Network
71
Guangda New Network
72
Guangda New Network
Performance Monittor
It can start the collection of performance monitoring for the equipment.
If the equipment has started the collection of performance monitoring, you
can view the current and historical performance curve on this page.
73
Guangda New Network
ONU list:
Display all the ONU device list information under the EP8503-12 device.
Configuration
Display all configuration items that the network management system
can configure for EP8503-12 devices, i.e. advanced configuration,
including: management parameters, uplink port configuration, PON port
configuration, ONU configuration, SNMP configuration, FDB configuration,
VLAN configuration, as follows:
74
Guangda New Network
In the left tree PON port, the device panel diagram PON port and it
hanging ONU schematic diagram can be in the PON port right-click menu
under the PON port ONU management [menu items: ONU list] and Using
ONU;
75
Guangda New Network
76
Guangda New Network
77
Guangda New Network
Step 2: Service open config, which requires you to map and bind globally
defined business types to the ONU configuration template on this OLT.
As shown in the following figure:
Special attention:
To ensure that the entire wizard really takes effect, you must check the
FTTX service enabled, or even if the wizard is configured, the system will
not automatically fetch the configuration of the relevant business types,
78
Guangda New Network
3.5.1 NC configuration
一. Common configuration
NC common configurations include network parameter configuration,
head-end configuration, VLAN pool configuration, template configuration,
black-and-white list configuration, selecting NC in left tree or topology, and
right-clicking menu with corresponding menu items.
79
Guangda New Network
80
Guangda New Network
81
Guangda New Network
82
Guangda New Network
二、Advanced config
Select the NC device in the left tree or topology, and select the
Advanced in the Advanced Configuration: TRAP Alarm Parameters,
TRAP Server Configuration, Routing Table Configuration, NTP Server
Configuration, IP Access Control, Loop Detection Configuration,
Outer-band Port Configuration, TELNET Timeout, QoS, cluster enable;
as follows:
83
Guangda New Network
Special attention:
1. The current upgrade scheme only supports the same version device
of the same model to be upgraded, but not for different models and
versions to be upgraded to the same version.
2. The current version supports the new upgrade scheme (i.e. fast and
stable upgrade with the device side). Because of the need for
device-side functional support, the new upgrade scheme can only be
valid for the new device version, i.e. EOC device version 60284 and
later versions can use the new upgrade scheme. The previous
version of EOC device upgrade is still using original upgrade plan.
GD GView NMS to provide a simpler device upgrade function, you can
select the "Device Upgrade" menu item from the main menu "Device
Management", as follows:
84
Guangda New Network
equipment and upgrade to which version in the upgrade task; at this time,
please check "Select device type, model upgrade" as follows:
85
Guangda New Network
86
Guangda New Network
87
Guangda New Network
Considering that the device not on-line in the whole network device
upgrade process leads to the omission of upgraded equipment or individual
equipment needs special upgrade, it is necessary to upgrade a single device
The steps for upgrading a single device are as follows:
1. Through the left tree or device query to find the need to upgrade device,
click the "NC upgrade" button;
88
Guangda New Network
2. Select upgrade files. If you need to add new files, please enter the
upgrade file management.
3. Upgrade types include: NC Image upgrade, NC firmware upgrade, NC
PIB upgrade (MOCA does not support PIB upgrade)
CPE device upgrade is mainly carried out through the NC, including
firmware automatic upgrade, PIB automatic upgrade, WIFI module automatic
89
Guangda New Network
upgrade;
Create upgrade items.
Device >Device Update
Upload the upgrade file to FTP server
90
Guangda New Network
91
Guangda New Network
92
Guangda New Network
The newly created entries will be displayed after the new success is added.
93
Guangda New Network
94
Guangda New Network
95
Guangda New Network
96
Guangda New Network
time range.
97
Guangda New Network
pop up. Otherwise, the performance monitoring curve of the device will
be displayed directly. the following figure:
The monitored device can view the performance curve through the
device right-click menu or the "Performance Monitoring" TAB page on
the right. the following figure:
3.8 Event
Event sound
99
Guangda New Network
The alarm sound and the playing time of the sound can be set when
alarms of different important levels are played, as follows:
Event filter
By opening alarm filtering and setting filtering rules for alarms of different
important levels and different types of alarms, the purpose of filtering alarms
that do not care about is achieved, as follows:
100
Guangda New Network
the top;
In the main menu, you can click "Event" to enter the Event Management
page, and then click " Attention Event " in the left window; or you can click
"Event->Attention Event " in the main menu to enter, as shown below:
All the alarms that have not been transferred to the historical alarm are
the current alarm, providing the functions of multi-condition combination
query, batch confirmation, clearing the alarm to the historical alarm, etc.
In the main menu, you can click "Event" to enter the Event Management
page, and then click "Current Alarm" in the left window. You can also click
"Alarm Management->Current Event" to enter the main menu, as follows:
Click on the operation bar in the list of view, positioning, device related
alarm view to view the device alarm details;
101
Guangda New Network
102
Guangda New Network
103
Guangda New Network
104
Guangda New Network
105
Guangda New Network
106
Guangda New Network
107
Guangda New Network
The system provides system log, security log, operation log and other log
information viewing functions. By viewing the system log, the system can
locate some system failures or misoperation.as follows:
108
Guangda New Network
109