Académique Documents
Professionnel Documents
Culture Documents
Exam HPE0-J55
Product
60 Q&A
Type
QUESTION 1
A customer has replaced their old 4Gb SAN switches in two on-premise datacenters. The new 32Gb SAN switches with
SW optics fail to establish connectivity with port speed set to 32Gb.
What could cause this connectivity issue at a specified speed?
Answer: A
QUESTION 2
What is an advantage of using Express Layout when implementing an HPE 3PAR StoreServ storage array?
Answer: D
QUESTION 3
A customer is experiencing high latency while reading data from their HPE 3PAR 8200 storage array. What should you
propose as the most cost-effective way to increase read performance?
Answer: C
QUESTION 4
What benefit does Software Defined Storage provide as opposed to traditional storage implementations?
A. simplified troubleshooting
B. increased access speed
C. hardware independent
D. native encryption
Answer: C
QUESTION 5
A customer wants to replace their aging storage environment. You want to collect capacity data about the current storage
system, servers, and applications.
Which tool can you use to accomplish this?
“Best Material, Great Results”. www.certkingdom.com 2
HP HPE0-J55
A. NinjaSTARS
B. OneConfig Advanced
C. Storage Assessment Foundry
D. HPE Storage Sizer
Answer: C
QUESTION 6
A customer wants to replace an existing third-party array with an HPE 3PAR StoreServ system. He asks to get an
estimate of the expected deduplication ratio on the new HPE 3PAR StoreServ system.
Which tool will you use to deliver this information?
A. HPE InfoSight
B. NinjaStars
C. HPE OneView
D. NinjaCrawler
Answer: B
QUESTION 7
A customer is moving their storage from HPE ProLiant Servers with direct attached HPE D3700 storage shelves, to HPE
StoreVirtual VSA. The customer is concerned about management capabilities.
Which tool should you demonstrate to the customer?
Answer: B
QUESTION 8
A customer needs to deploy a storage solution for a new application that requires long-term data protection, retention,
immutability, and encryption with write once, read many (WORM) data access policies.
Which product would you recommend?
A. Double Take
B. HPE StoreEasy
C. HPE StoreOnce
D. iTernity iCAS
Answer: C
QUESTION 9
Which technology maximizes the available capacity for disk-based backups?
A. snapshots
“Best Material, Great Results”. www.certkingdom.com 3
HP HPE0-J55
B. deduplication
C. tiering
D. wide striping
Answer: B
QUESTION 10
A customer wants to use Micro Focus Data Protector to back up their virtualized environment. They require disk-based
backup and deduplication.
Which backup target will meet the customer requirements?
Answer: B
QUESTION 11
An additional drive enclosure full of property matched drives is added to expand the capacity of an HPE 3PAR
StoreServ array.
Which additional process is required to ensure maximum performance and utilization of the array?
Answer: C
QUESTION 12
What is the main difference between the FC and FCoE stack?
Answer: B
QUESTION 13
Which HPE storage solution provides shared block storage without the need for external hardware array controllers?
Answer: C
QUESTION 14
Which scenario will require a SAN administrator to enable NPIV on one or more fibre channel switches in a SAN fabric?
A. Connection of HPE blade servers to the fabric using HPE B-series SAN switch uplink (E) ports
B. Connection of HPE blade servers to the fabric using HPE Virtual Connect uplink (N) ports
C. Connection of HPE blade servers to the fabric using pass-through uplink (N) ports
D. Direct connection of HPE blade Servers to a 3PAR array using HPE Virtual Connect uplink (N) ports in a
“flat-san” configuration
Answer: B
QUESTION 15
A customer has a Windows 2016 SQL Cluster running on HPE StoreEasy 1450 storage and needs to ensure that
combined throughput of all network adapters is used on all cluster nodes together.
Which HPE StoreEasy system feature helps the customer meet this requirement?
Answer: C
QUESTION 16
To which customer would you propose a solution consisting of StoreOnce CloudBank as an object storage platform?
A. A StoreOnce 3100 customer looking for a cloud based data replication solution.
B. A 3PAR customer looking for a cloud based data protection solution.
C. A customer looking for copies from cloud backup to StoreOnce NAS and VTL.
D. A customer looking for a solution to backup directly to a CloudBank store.
Answer: A
QUESTION 17
What must be configured on a host system to connect to iSCSI storage?
A. iSCSI initiator
B. iSCSI expander
C. iSCSI target
D. iSCSI array
Answer: A
QUESTION 18
A customer wants to replace their existing storage system.
“Best Material, Great Results”. www.certkingdom.com 5
HP HPE0-J55
Click the tool that can be used to turn captured data into input data required by sizing tools once the performance and
capacity related data are captured from current storage systems and servers.
Answer:
QUESTION 19
Which tool is used to assign or zone D6000 drive bays directly to an HPE BladeSystem server bay?
A. HPE OneView
B. Virtual SAS Manager
C. HPE InfoSight
D. Virtual Connect Manager
Answer: B
QUESTION 20
A customer requests a new storage array with the following features:
VMware virtualization integration
two sites with asynchronous replication
support for mixed mainstream workload
virtual server consolidation
automatic monitoring for available hotfixes
Which product should you present?
B. HPE StoreEasy
C. HPE StoreOnce
D. HPE Nimble
Answer: D
QUESTION 21
Which Fibre Channel SAN topology supports automatic path rerouting if all ISLs between two switches fail?
A. single core-edge
B. mesh
C. cascade
D. Flat SAN
Answer: B
QUESTION 22
Which characteristics must you consider to properly size a Nimble AF3000 solution? (Choose two.)
A. RAID level
B. CPG raid set
C. triple parity
D. hot spare drives
E. deduplication and compression
Answer: C E
QUESTION 23
A customer is concerned whether a proposed solution is future proof.
Which independent IT industry source can you recommend to the customer to prove HPE is a storage vendor with a
strong vision?
Answer: C
QUESTION 24
What is used to create connections between Fibre Channel SAN Switches?
A. ISL
B. NPIV
C. FCIP
D. FCoE
Answer: A
“Best Material, Great Results”. www.certkingdom.com 9
HP HPE0-J55
QUESTION 25
Which HPE storage products act as a gateway to present LUNs as CIFS and NFS file shares to clients? (Choose two.)
A. HPE StoreOnce
B. HPE Nimble
C. HPE StoreEasy
D. HPE StoreVirtual
E. HPE 3PAR StoreServ File Controller
Answer: C E
QUESTION 26
A customer has an HPE D3000 enclosure with a drive that has its LED colored BLUE. What does the BLUE LED
indicate?
Answer: D
QUESTION 27
The customer has HPE Nimble AF-series storage.
What is true when upgrading the unit with Dual-Flash Carriers?
Answer: D
QUESTION 28
Which user interface must be used to create new storage volumes on HPE MSA storage systems? A. HPE Centralized
Management Console
B. HPE OneView Global Dashboard
C. HPE Storage Management Utility
D. HPE Pool Manager
Answer: C
QUESTION 29
A customer needs to implement a VDI solution for 300 users. They need hardware assisted deduplication and
compression, and integrated data protection.
Which part of the HPE storage strategy should you position?
A. Hyper-converged
B. Composable
C. Converged
D. Traditional
Answer: A
QUESTION 30
Which features are part of the Advanced Data Services Software Suite on the HPE MSA 2052? (Choose two.)
A. flash cache
B. automatic tiering
C. RAID Level 6
D. data encryption
E. 512 snapshots
Answer: B E
QUESTION 31
A customer is interested in purchasing a network attached storage device for their data center. Which sizing
considerations are required to recommend the proper solution? (Choose two.)
Answer: B D
QUESTION 32
When speaking about data protection, what is the term for the acceptable period of time an application can be
unavailable?
Answer: C
QUESTION 33
Which SSD product line would provide your customer with the lowest price per GB?
Answer: D
QUESTION 34
A customer is experiencing bottleneck issues with their MSL2024 and is unable to identify the specific cause. What
diagnostic tool can assist the customer in identifying the problem?
Answer: C
QUESTION 35
Considering the HPE Converged Storage strategy, match the product to its most appropriate use case.
Answer:
QUESTION 36
A customer is considering an upgrade of rotational drives to solid state disks.
What is the typical increase of random read IOPS per drive with 15K drives compared to enterprise performance SSD?
A. 10x
B. 100x
C. 1000X
D. 10000x
Answer: B
QUESTION 37
When designing a SAN fabric topology, which parameters will influence data availability? (Choose two.)
A. ISL trunking
B. power supply wattage
“Best Material, Great Results”. www.certkingdom.com 13
HP HPE0-J55
C. number of switches
D. SFP speed
E. buffer credits
Answer: A C
QUESTION 38
You are designing a new HPE 3PAR StorServ array for a customer. The customer is concerned about whether HPE
3PAR is able to address their challenges.
Which HPE resource should you use to show the customer how HPE can help resolve their concerns?
Answer: D
QUESTION 39
When configuring volume access on a Nimble storage array, in which scenario would an administrator select multiple
initiators to access a volume?
A. The server administrator has requested MPIO access for the host.
B. The volume will be used as a CIFS storage volume by a gateway device.
C. The server administrator has requested a high performance volume.
D. The volume will be used as a datastore for a virtualization cluster.
Answer: D
QUESTION 40
A customer is considering a SAN solution.
Which resource should you use to configure a storage infrastructure to meet your customer's performance needs?
Answer: D
QUESTION 41
Which Host Adapters support File Persona on the HPE 3PAR StoreServ 8000 series array? (Choose two.)
Answer: A C
QUESTION 42
What is required to enable a server to boot from SAN storage in a fabric? (Choose two.)
Answer: A B
QUESTION 43
What is an advantage of a meshed FC SAN topology when compared to a cascaded topology?
Answer: C
QUESTION 44
customer uses several StoreEasy 1000 systems successfully. They recently added a StoreEasy model 3000 for more
capacity. They cannot find the HPE Pool Manager on the newly installed system.
What is the most likely issue causing the customer to have trouble locating the HPE Pool Manager?
Answer: A
QUESTION 45
Click the area that depicts the HPE 3PAR Adaptive Optimization feature.
Answer:
QUESTION 46
Which storage solution is the most cost-effective to meet an RTO measured in days?
Answer: C
QUESTION 47
A customer asks if they qualify for the HPE 3PAR Get Thin Guarantee program. Which resource should you use to
“Best Material, Great Results”. www.certkingdom.com 16
HP HPE0-J55
A. HPE NinjaStars
B. HPE Storage Product Selector
C. HPE Storage Sizing Tool
D. HPE SAN Design Reference Guide
Answer: A
QUESTION 48
What is recommended when using NL SAS drives in an HPE 3PAR StoreServ array?
Answer: C
QUESTION 49
A customer wants to learn more about the HPE storage solution that you recently proposed by watching live or pre-
recorded demos.
Which resource should you recommend?
A. HPE SPOCK
B. HPE Solution Demo Portal
C. HPE Smart Portal
D. HPE ActiveAnswers
Answer: B
QUESTION 50
An existing HPE 3PAR StoreServ customer wants to add a newly installed 3PAR system into SSMC, but they cannot
find the 'Add storage system' option in the menu.
What should you do to add a new 3PAR system to SSMC?
Answer: B
QUESTION 51
Which HPE StoreEasy feature provides high availability for Windows file shares in clustered configurations?
A. IPSec
B. NFS v4.1
“Best Material, Great Results”. www.certkingdom.com 17
HP HPE0-J55
C. SMB 3.0
D. Peer Motion
Answer: B
QUESTION 52
In which status indicator scenario would drive removal result in potential data corruption? (Choose two.)
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
E. Exhibit E
Answer: C E
QUESTION 53
Which HPE 3PAR StoreServ product simplifies the configuration process of the Storage Area Network and reduces the
number of steps required to provision new storage.
A. Persistent Ports
B. Adaptive Optimization
C. Dynamic Optimization
D. Smart SAN
Answer: D
QUESTION 54
A customer has an HPE Synergy frame with eight compute modules. They want to implement an iSCSI SAN for the
servers in the Synergy frame.
Which components should you recommend? (Choose two.)
Answer: C D
QUESTION 55
Match the tools and resources with the features they provide.
Answer:
QUESTION 56
Match the backup type with its description.
Answer:
QUESTION 57
Which component shifts processing of the communications protocol tasks (TCP/IP) from the server processor to the
Network Interface Card (NIC), lowering CPU overhead and use?
Answer: A
QUESTION 58
What is a benefit of thin provisioning?
“Best Material, Great Results”. www.certkingdom.com 21
HP HPE0-J55
A. It uses a real-time I/O engine to position data intelligently on the most appropriate tier of storage.
B. It gives the appearance that a volume is larger than the resources that have been allocated.
C. It removes allocated but unused space with minimal performance impact.
D. It stores frequently accessed files in a local cache to reduce the consumed storage space.
Answer: B
QUESTION 59
A customer needs a storage device to be used as an NFS file server. It must provide deduplication for greater efficiency.
The storage device will also be used as a backup target.
Which HPE Storage system meets this requirement?
Answer: B
QUESTION 60
A customer requires a storage solution in their Composable Synergy environment.
Which HPE direct attach storage should you recommend?
Answer: A