Académique Documents
Professionnel Documents
Culture Documents
The “12 V only” power concept by Fujitsu can improve your competetive situation in the market
12 V only topology
A 12V only system requires a special mainboard design plus an appropriate power supply which is available from FSP Technology Inc..
The PSU is generating only 12V. DC/DC converter will produce 5V & 3.3V for the
system, where they are needed (e.g. drives & PCI slots). Traditionally 3.3V are
produced in PSU with magnetic components, which have higher losses, than DC/DC
converters on motherboards with our novel approach.
Page 1 of 2 http://ts.fujitsu.com/
This integrated system provides a number of clear benefits, which are presented below.
The crossload problems, load distribution between 12V, 5V & 3.3V, of multioutput PSU are traditionally quite complex problems for system
designers. It is obvious from picture 1, that only one converter is available, which is been controlled by one PWM signal. However 3 output
voltages are generated. Now there are potential load cases possible, where high load can appear at 3.3V while 5V & 12V is barely loaded. This
leads to critical conditions, for the system operation, especially when dynamic load changes happen. New INTEL Q67, B65 systems do have
excellent idle power consumption; however the dynamic load and step load range will further increase compared to previous systems.
The novel 12Vonly approach simplifies the life for system designers dramatically. Crossload conditions need not to be considered any more, as
the PSU in producing only 12V. All other voltages are been produced by separate regulators on the systemboard. As the PSU needs only to
regulate one output voltage, the dynamic performance will be better than on multi output PSU, which brings another benefit to the system
designer.
Cost considerations
Costs for the PSU will drop, as 5V and 3.3V generating circuits will be removed. For the mainboard it might increase only just a little bit. Overall
the costs will drop as soon volume for the PSU will increase. For cost comparison it is always important to compare the efficiency level of the PSU
and the used regulators on the motherboard.
The 12 V Only System is not an industry standard yet but a proprietary solution, which is currently implemented by all
Tier 1 Systembuilders like e.g. Dell, HP, Fujitsu!
Contact All rights reserved, including intellectual property rights. Technical data subject to
FUJITSU Technology Solutions GmbH modifications and delivery subject to availability. Any liability that the data and
E-mail: oem-marketing@ts.fujitsu.com illustrations are complete, actual or correct is excluded. Designations may be
Website: http://ts.fujitsu.com trademarks and/ or copyrights of the respective manufacturer, the use of which by
2012-08-21 CE EN third parties for their own purposes may infringe the rights of such owner. For
further information see http://ts.fujitsu.com/terms_of_use.html Copyright Fujitsu
Technology Solutions GmbH 2010
Page 2 of 2 http://ts.fujitsu.com/