Académique Documents
Professionnel Documents
Culture Documents
TUTORIAL – 3
DOS DOA
Que 2. Derive the relationship between phase voltage and line voltage in star
connected three phase system? If a three phase 100V, 50 Hz balanced supply
system is feeding to a balanced delta connected load of 10∟45ο ohm. Find phase
and line current?
Que3. Two-wattmeter method was used to determine the input power to a three
phase motor. The readings were 5.2kw and (-1.7kw), and the line voltage was 415V
.Calculate (1) total power (2) power factor (3) line current?
Que6. A balanced three phase star connected load of 18kw taking a leading current
of 60A when connected across a three phase 440V ,50Hz supply. Find the values
and nature of load?
Que9. Compare three phase Star and delta connected systems. Show that total
power in these connection remain same? A balanced three phase star connected
load takes a power of 5kw at 0.8 pf lagging when connected to a 400V, Three phase
supply. Calculate line current and impedance per phase of the load.
Que10. A moving coil ammeter has a resistance 0.01Ω and full scale deflection
current of 0.25A . How this meter can be made to read (1) Voltage up to 250V (2)
Current up to 20A?
Que11. Power measurement by two wattmeter explain the significance of (1) equal
wattmeter reading (2) Zero reading on one wattmeter ;using suitable phasor
diagram?