Académique Documents
Professionnel Documents
Culture Documents
Mechanical Description
Frame Plate
Type ICLF-80 Carbon Steel Type AT40M HV
Design Code ASME Section VIII, Div. 1 U Plate Material 0.50 MM 304 S/S SA-240
Design Pressure 517 KPA G Plates/Frame 112
Design Temp. Max/Min 66 °C / -27.7°C Passes-H/C 2/2
Test Pressure 672 KPA G Channels-H/C 55/56
Frames In Parallel/Series/Total 1/ 1/ 1 Gasket Material NBR
A-Dim. Min./Max. 403.56/ 429.54 MM
Overall Length 842 MM Connections Location
Overall Width 511 MM Hot In 4.00 Inch C/S Studded 4F
Overall Height 1663 MM Hot Out 4.00 Inch C/S Studded 4R
Guide Bar Length/Capacity 762 MM / 115 plates Cold In 4.00 Inch C/S Studded 3R
Compression Bolt Length/Capacity 762 MM / 124 plates Cold Out 4.00 Inch C/S Studded 3F
Weight Operating/Empty 882/ 709 KG Vent 4.00 Inch C/S Studded 1F
Vent 4.00 Inch C/S Studded 2F
Notes: V12.1.2.0
Aluminum shroud omitted
The purchaser of the equipment bears total responsibility for suitability of use of all materials in this application.
We may have assumed some design values. If they differ from your requirements, a new design may be necessary.