Académique Documents
Professionnel Documents
Culture Documents
SIMPLE CONNECTIONS
1. FULL DEPTH END PLATE- Flange side
Beam-1 Beam-2
Beam
Column
Column
BEAM-1 BEAM-2
BEAM-1 COLUMN
COLUMN
1. Check for shear capacity of bolt group between cleats and web of supported beam
2. Check for shear and bearing capacity of cleat connected to supported beam
3. Check for shear capacity of bolt group connecting cleats to supporting column
4. Check for shear and bearing capacity of cleats connected to supporting column
5. Check for Tension capacity of double angle web cleats
6. Check for Tension and bearing capacity of beam web
COLUMN
COLUMN
BEAM-2
BEAM BEAM-2
1. Check for shear capacity of bolt group between cleats and web of supported beam
2. Check for shear and bearing capacity of cleat connected to supported beam
3. Check for shear and bending capacity of the supported beam
4. Check for shear capacity of bolt group connecting cleats to supporting column
5. Check for Local shear and bearing capacity of supporting column web
6. Check for shear and bearing capacity of cleats connected to supporting column
7. Check for Tension capacity of double angle web cleats
8. Check for Tension and bearing capacity of beam web
Flange side
BEAM-1 BEAM-2
BEAM-1 COLUMN
COLUMN
COLUMN
4. Bracings:
4.1 Vertical Bracing Connected by web plates
20 min
4.4 Vertical Bracing connection -brace bar (UC/UB) connected by flange stripping
20 min
1. Check for shear capacity of bolts connecting flat and gusset plate
2. Check for combined shear and tension capacities bolt connecting the beam and column flange
3. Check for shear,tension and block shear capacities of the flat
4. Check for bending capacities of the gusset plate
5. Check for weld between gusset and beam flange
6. Check for weld between gusset and end plate
7. Check the compression capacity of the gusset
1. Check for combined shear and tension capacity of bolts between endplate and column web
2. Check for weld between beam web and end plate
3. Check for bending capacity of end plate
4. Check for bearing capacity web/end plate
5. Check for weld between gusset plate and beam web
6. Check for weld between gusset plate and end plate
7. Check for compression capacity of gusset plate
8. Check for gusset plate against minor axis bending
9. Check for bearing of bracing bar
10. Check for block shear capacity of brace bar
1. Check the bolts connecting supporting and supported beam for combined shear and tension
capacity
2. Check the spade plate for shear,tension and block shear capacities
3. Check the gusset plate for shear,tension and block shear capacities
4. Check the cover plates for shear,tension and block shear capacities
5. Check the weld between the brace bar and spade plate
6. Check the weld between the supported beam web and gusset plate
7. Check the weld between the supported beam endplate and gusset plate
8. Check the weld between beam and endplate
9. Check the supporting beam web tying/bending capacity
10. Check the thickness of the endplate
11. Check the compression capacity of the gusset plate
12. Check the wall of the section for shear capacity
5. Column splices:
A
A
A-A
A A
SECTION A-A
CHS /SHS BRACING BAR WITH SPADE PLATE SLOTED IN TO SECTION USING COVER
PLATES:
Work Point
HORIZANTAL BRAZING :
Beam to beam end plate connection with UC plan brace
A A
W.P.
SECTION A-A