Académique Documents
Professionnel Documents
Culture Documents
Feature
• 1-4 steps control, to satisfy multiple needs of heating power;
• Overheating protection, temperature protection switch, fixed inside, can shut off when overheating.
SQ Option
Electric heating control box
Notice
• Connect the line according to the electric drawing, can't miss-connection and wrong-connection,
• Examination should be periodically executed to ensure the temperature protection switch operate normally and
avoid protection invalidation when overheating.
• Ensure the fan has been turned on before running the electric heater, and the electric heater should be closed 5
minutes before the fan is shut down.
Fan Segment
Fan segment can be equipped with a double width, double inlet, forward or backward curved blade centrifugal fan. Fan
inlet cone is designed according to the requirement of aerodynamic performance, impeller has been statically and
dynamically balanced.
The bearings of small fan are pre-lubricated, sealed, and lubrication is free for lifetime. The bearings of large fan are
thrust type, with self-adjusting journal and lubrication points in the housings. Fan driven device (V belt) is selected and
installed by factory, it can meet the need of performance.
Motor is TEFC type, class B or F insulation and IP54 or IP55 protection. Standard motor is 2/4/6 poles and single speed,
with power supply of 380V-3PH-50Hz, 380~415V-3PH-50Hz or 230/380/460V-3PH-60Hz. Fan and motor are installed
on an independent base frame, with spring vibration isolators.
VSD motor is available for all series power supply. Converter, starter and VSD motor are standard options at
380V-3PH-50Hz.
SQ Option
• Two speed motor (2/4,4/8,4/6,6/8 poles)
Fan arrangement
Air Inlet
14