Académique Documents
Professionnel Documents
Culture Documents
HEAT-SHRINKABLE SLEEVE
PRODUCT DATA SHEET
Benefits
Complete replication of two or three layer mainline coating
Superior level of sleeve adhesion to steel
Highest level of sleeve adhesion to polyethylene factory coating
Excellent resistance to cathodic disbondment
Excellent resistance to soil shear forces
Superior hot-water immersion resistance
Certified UV-resistance
Dimpled backing for correct application of heat
Supplied with anti-adhesion tape for easier transportation and storage in hot areas
Calculated operation time 45 years
Properties of TIAL-M80 Sleeve
≥2,5
Adh
Lap shear strength ASTM D 1002 MPa
Softening point ASTM E 28 °C 110-120
For information on epoxy primer, please, refer to TIAL-P Primer (A) + (B) product data sheet.
Important notes:
For correct installation of TIAL-M80 heat-shrinkable sleeve, please, examine TIAL-M80 Installation Guide.
To obtain more precise information about TIAL products contact your local distributor/ agent or directly to TIAL.
Properties of the sleeve provided in this data sheet are based on test reports from independent laboratories. Product
values of this PDS shall not be interpreted as product specification.
TIAL warrants that the product conforms to the chemical and physical description and are appropriate for the use stated on this technical
data sheet when used in compliance with TIAL-M80 installation guide. Since many installation factors are beyond the control of TIAL, the
user shall determine the suitability of the products for the intended use and assume all risks and liabilities in connection herewith. TIAL
liability is stated in terms and conditions of sales contracts. TIAL makes no other warranty either expressed or implied. All information
contained in this technical data sheet is to be used as a guide and is subject to change without notice. This technical data sheet supersedes
all previous data sheets on this product.