Académique Documents
Professionnel Documents
Culture Documents
REMOVAL
2. REMOVAL
1. CLAMP UNIT
REMOVAL
1) Turn off the power and remove the back cover.
2) Disconnect connectors of the clamp motor and Clamp Safety SW.
3) Remove mounting screws (× 4) of the clamp unit, remove the unit.
- Precaution in Assembly -
• Be sure to use fixing screws of M4 × 6 (short screw). (A long screw, if used, can hit the drum.)
GR3770 5-6
MASTER CLAMP & LOADING SECTION
REMOVAL
C-ring
Clamp spring
3) Remove mounting screws (× 2) of Compensator Plate, remove the compensator plate, the metal, the collar
(short), Drive Gear II, and the collar (long).
4) Loosening the fixing set screw of the clamp cam, remove the cam.
5) Remove mounting screws (× 4) of the clamp motor remove the motor.
Metal
Drive gear
Set screw
Compensator plate
Collar
Clamp motor
Clamp cam
5-7 GR3770
MASTER CLAMP & LOADING SECTION
REMOVAL
Put marking
GR3770 5-8