Vous êtes sur la page 1sur 6

MODULE 4 (B1) - PARIKSHIT

1- Emitter is heavily doped so it can tranfer charge to


* Base
* Collectors
* Base & collectors

2- Which one is heavily doped


* Base
* Collector
* Emitter

3- For conduction in PN junction


* Emitter is positive wrt base

4- For hi conduction which is used


* Semiconductor
* Copper foil
* Aluminum

5- Organic coating on PCB for what purpose


* To prevent contamination &oxidation

6- Base material of PCB


* Insulator

7- If reverse voltage of varactor diode is reduced

* Depletion layer decrease &capacitance increases

8- Syncro indicator is similar to torque synchro transmitter

* By construction
* By electrical operations
* Both

9- Transistor consist of?


* 2 diode

10- Base material of PCB store at


* Low temperature
11- For conduction of current
* Anode of diode must be positive

12- LED is used as


* Power indicator

13- Mtcs
* Emitter is forward bias wrt base

14- Why capacitor connected across stator coil?


* Stator current reduced & accuracy increases

15- Rotor of synchro torque transmitter made of


* Two wire connected in series

16- VlSI ic
* 1000

17- If two rotors are alligned current will be


* Zero

18- Most common used IC’s


* Monolithic

19- Size of ic
* Extremely small

20- Which diode is heavily doped


* Varactor diode

* Tunnel diode

* Zener diode

21-Advantage of IC
* Can be operated at high temperature

22- LED material used

* Gallium and Arsenic.

23- PCB base material for switching circuit

* Gold, Nickel, Silver, Copper

24- Emitter circuit is

* Fwd biased to allow low resistance to emmiter


25- Collector circuit always

* Reverse bias wrt to base

26- Common mfd. IC’s are

* Monolithic

27- PCB is made of

* Layers of phenolic papers

* Epoxy resin fibre glass

* Both

28- Difficult to manufacture

* Inductor and Transformer.

29- IC’s is used in computer

* Digital

* Linear

* Both

30- In synchro indicator transmitter and receiver are similar in

* Construction

* Electrical operation

* Both

31- IN synchro indicator

* Rotor moves one or other way

32- PCB material stored at

* Low temp. at B stage

33- PCB mfd. At

* As per circuit requirement and specification

34- Varactor diode if reversed biased

* Capacitance increases
35- In transistor

* One junction is fwd biased and other is reversed biased

36- LED disadvantage

* Low reverse current

37- LED used as

* Power Indicator

38- Suitable right size capacitor connected across stator

* Current and accuracy increases

* Current decreases and accuracy increases

39- IC’s are made of

* Silicon.

40- LED is used for

* Amplification

* Power circuit

41- For a diode to be forward biased anode must be

* Positve

* Negative

* Negative wrt to cathode

42- Which is the most commonly used coating film

* Semiconductor

* Alluminium foil

* Copper foil

43- The base material for PCB is

* Insulator
44- The emmiter of transistor is heavily doped so in fwd biased

* Inject electrons into the base

* Inject electrons into the collector

45- In NPN transistor

* The emitter is negative wrt to base

* The emitter is positive wrt to base

* The emitter is positive wrt to collector

46- In PNP transistor

* The collector is negative wrt to base

* The collector is positive wrt to base

* The collector is negative wrt to emmiter

47- In torque synchro system the rotor of torque transmitter is

* Made up of 2 coils connected in series to form a unit.

* Made up of 3 coils connected in series to form a unit.

* Made up of 2 coils connected in series parallel to form a unit.

48- In control synchro system when the rotors are lines up the inductance between them is

* Low

* Zero

* Very high

49- IC’s are comparatively

* Large

* Very large

* Extra small
50- A type of IC which has more than 1000 integrated circuit

* LSI

* VLSI

* MLSI

51- The surface of PCB is coated with conformal coating

* To protect them from oxidation and contamination

52- Synchro system in servo

* Turn light load

* Turn heavy load NOTE – 1. Torque Synchro = Light Load

* Both 2. Control Synchro = Heavy Load

53- Material suited for power switch in PCB

* Gold

* Nickel

* Silver

* Copper

Gold used for low resistance and corrosion resistance.

Vous aimerez peut-être aussi