Académique Documents
Professionnel Documents
Culture Documents
Important!
Risk of damage!
It is absolutely essential to follow an exact procedure for removing and installing the exhaust camshaft.
The upper and lower bearing strips must be preloaded with a total of six special tools 11 8 553.
Lift out lower and upper bearing strips (1) with camshaft.
Note:
Graphic shows N52.
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/401/nonstandard/452770/selfRefLink/false 1/7
7/15/2019 Removing and Installing/Replacing Exhaust Camshaft (Camshaft) - ALLDATA Repair
Important!
Both camshafts have different markings.
Mixing up the two camshafts will result in engine damage.
A Exhaust camshaft.
E Intake camshaft
Press plain compression rings (1) apart upwards and downwards and removed towards front.
Important!
Plain rectangular compression rings (1) can easily break.
Important!
Removal on engine:
Engine at cylinder no. 1 firing TDC position.
Removed cylinder head:
When using special tool 11 9 000, it will be necessary to remove the aluminum strip.
Installation Note:
Before installing the exhaust camshaft, make sure the roller cam follower is correctly seated on the hydraulic valve clearance compensating element and
the valve.
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/401/nonstandard/452770/selfRefLink/false 2/7
7/15/2019 Removing and Installing/Replacing Exhaust Camshaft (Camshaft) - ALLDATA Repair
Press down roller cam follower (1) on cylinder no. 2 with spindle nut of special tool 11 8 551.
Installation Note:
Lubricate all bearing points with engine oil.
Installation Note:
Lubricate all bearing positions and cams with engine oil.
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/401/nonstandard/452770/selfRefLink/false 3/7
7/15/2019 Removing and Installing/Replacing Exhaust Camshaft (Camshaft) - ALLDATA Repair
Join exhaust camshaft to lower and upper bearing strips with torque wrench from inside outwards to 8 Nm.
Release all screws of bearing strip (1) from outside inwards by 90°.
Installation Note:
Lower and upper bearing strips must be aligned to each other at ground surfaces (1 and 2).
Bring thrust piece and legs of special tools 11 8 553 into contact at milled surfaces.
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/401/nonstandard/452770/selfRefLink/false 4/7
7/15/2019 Removing and Installing/Replacing Exhaust Camshaft (Camshaft) - ALLDATA Repair
Note:
Schematic depiction of special tool 11 8 553 at upper bearing strip (1) and lower bearing strip (2).
Important!
Tighten screw (3) on thrust piece to 2 Nm.
Note:
Make sure that legs come into exact contact on ground surfaces, lower bearing strip (1) and upper bearing strip (2).
Initially tighten screw of special tool 11 8 553 to ground surfaces of lower bearing strip (2) and upper bearing strip (1).
Important!
Tighten screws on thrust piece to 2 Nm.
Important!
Set special tool 11 4 350 to 2 Nm.
Pre-tension all special tools 11 8 553 with special tool 11 4 350 only.
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/401/nonstandard/452770/selfRefLink/false 5/7
7/15/2019 Removing and Installing/Replacing Exhaust Camshaft (Camshaft) - ALLDATA Repair
Mount special tools 11 8 553 with screw (1) to inside of cylinder head.
On cylinder no. 2 mount special tool 11 8 553 with screw (1) facing outwards.
Position special tools 11 4 350 so that screw connections (2) of bearing strip are easily accessible.
Tighten lower and upper bearing strips with special tool 00 9 120.
Important!
Remove special tool 11 8 553 only when camshaft screw connection is completed.
Assemble engine.
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/401/nonstandard/452770/selfRefLink/false 6/7
7/15/2019 Removing and Installing/Replacing Exhaust Camshaft (Camshaft) - ALLDATA Repair
https://my.alldata.com/repair/#/repair/article/48153/component/56/itype/401/nonstandard/452770/selfRefLink/false 7/7