Académique Documents
Professionnel Documents
Culture Documents
Laminator
BU-1600CII PLUS
User Manual
I. Introduction
BU-1600CII PLUS is upgrade version of BU1600CIIZ due to high demand of entry level
cold laminator with auto stripping and collecting back paper. It is simple in structure,
reasonable in price and user-friendly. This is working principle: the motor drives the
upper and lower laminating roller. The roller for feeding cold lamination film is linked to
that for collecting back paper. When the cold lamination film is pulled out, back paper is
collected at the same time. Continuous laminating or longer picture laminated are
possible due to additional feature of automatic stripping film and collecting back-paper
which is driven by upper and lower laminating rollers. Operator focuses on monitoring
the laminating result and collecting the media.
Power rating of laminator is only 60W. It consumes less power. This machine supports
two types of power supply - 220-240V and 110V. Users must clarify the power supply
before placing order. Also, they must check the voltage of machine and power supply
when the machine arrives.
Speed can be adjusted freely on control panel. This machine is equipped with foot-pedal.
You can operate the machine by manual-control switch or foot-pedal switch.
There is emergency button. If there is accident, the machine would stop immediately by
pressing the button.
As a result, the feedback from market is very good and most users are satisfied. Since it
was launched, it is still the most popular model at present.
This is specification:
Laminating Width 1600mm or 63”
Laminating Speed 0 – 5 m/min or 16 feet/min
Roller Diameter 130mm or 5.1”
Maximum Laminating Thickness 23mm or 0.9”
Power 60W
Fig.1
1.roller for collecting back paper 8.control panel
2.roller for supporting film 9.rack
3.guiding roller 10.truckle
4.upper roller 11.roller for supporting picture
5.panel for covering the picture 12.handle
6.worktable 13.emergency stop switch
7.damp knob for film-supporting roller 14.handwheel
Fig.4
V. Warranty
1) The warranty for the machine will be offered within one year stating from the date of the
commercial invoice.
When filing the each claim, the buyer must provide details of problem and serial number with
clear pictures or video.
Eastsign shall not be liable to honor the terms of this warranty if the product has been used in
any application other than that for which it was intended, or if it has been subjected to misuse,
abuse, accidental damage, modification, improper wiring, improper repair, incorrect repair or
improper installation procedures.
2) If the machine is under warranty, parts will be provided free, the buyer will be responsible for
the shipping cost.
3) If the machine is not under warranty, parts and shipping cost will be charged.
4) Fill in the warranty form in Eastsign website once you receive the machine.
http://www.eastsign.com/warranty_form.php