Académique Documents
Professionnel Documents
Culture Documents
Introduction
‧The input power is 21 Watt, the multi-chip ultra high power ProEngine Series
delivers never before seen luminous flux output from a single emitter. The
superficial illuminating nature of ProEngine makes them the preference in
Par lighting, typical applications include commercial down lighting, LED bulb,
accent lighting, ceiling lighting and spot lighting.
2015/10
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, DS-0373
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Emitter Mechanical Dimensions
Notes:
1. Slots in aluminum-core PCB for M3 mounting screw.
2. Solder pads are labeled “+” and “-” to denote positive and negative, respectively.
3. Drawing not to scale.
4. All dimensions are in millimeters.
5. Unless otherwise indicated, tolerances are ± 0.30mm.
6. Please do not use a force of over 0.3kgf impact or pressure on the lens of the LED, otherwise
it will cause a catastrophic failure.
*The appearance and specifications of the product may be modified for improvement without notice.
2
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Flux Characteristics, TC = 25°C
Radiation Part Number DC Forward Luminous Flux ΦV (lm) CRI
Color
Pattern COB Current (mA) Minimum Typical Minimum
270* 1300 1440
White PACE-21FWL-BC3P 80
540* 2300 2560
270* 1270 1420
Neutral White PACE-21FNL-BC3P 80
540* 2260 2520
Lambertian
270* 1160 1350
PACE-21FVL-BC3P 80
540* 2060 2400
Warm White
270* 985 1150
PACE-21FVL-DC3P 90
540* 1750 2040
● The mark ”*” indicated product is tested and binned at the specified drive current.
● ProLight maintains a tolerance of ± 7% on flux and power measurements.
● ProLight maintains a tolerance of ± 2 on CRI measurements.
● Please do not drive at rated current more than 1 second without proper heat sink.
3
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Electro-Optical Characteristics, TC = 25°C
PACE-21FWL-BC3P PACE-21FNL-BC3P
IF (mA) VF (V) Power (W)
Flux (lm) lm/W Flux (lm) lm/W
PACE-21FVL-BC3P PACE-21FVL-DC3P
IF (mA) VF (V) Power (W)
Flux (lm) lm/W Flux (lm) lm/W
4
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Color Bin
White Binning Structure Graphical Representation
0.40
0.38 5000 K
Planckian
(BBL)
y
0.36
V0
0.34
0.32
White
0.30
0.28 0.30 0.32 0.34 0.36 0.38 0.40
X
White Bin Structure
Oval Typ. CCT
Bin Code Center
parameter (K)
0.3447 a 0.00822
x
V0 b 0.00354 5000
y 0.3553 Ɵ˚ 59.62
● Color range stay within MacAdam “3-step” ellipse from the chromaticity center.
● The chromaticity center refers to ANSI C78.377.
● Tolerance on each color bin (x , y) is ± 0.005
5
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Color Bin
Neutral White Binning Structure Graphical Representation
Color Range 2-step ellipse ANSI C78.377 IEC 62612 7-step ellipse
0.44
0.42
4000 K
0.40
Planckian
(BBL)
y
0.38 S0
0.36
F 4000
0.34
Neutral White
0.32
0.32 0.34 0.36 0.38 0.40 0.42 0.44
X
Neutral White Bin Structure
Oval Typ. CCT
Bin Code Center
parameter (K)
a 0.00626
x 0.3818
S0 b 0.00268 4000
y 0.3797
Ɵ˚ 53.72
● Color range stay within MacAdam “2-step” ellipse from the chromaticity center.
● The chromaticity center refers to ANSI C78.377.
● Tolerance on each color bin (x , y) is ± 0.005
6
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Color Bin
Warm White Binning Structure Graphical Representation
Color Range 2-step ellipse ANSI C78.377 IEC 62612 7-step ellipse
0.48
0.46
0.44
2700 K
2940 K
3000 K
0.42
y
M0 Planckian
N0 NC (BBL)
0.40
P 2700
0.38
F 3000
0.36
Warm White
0.34
0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52
X
Warm White Bin Structure
Oval Typ. CCT Oval Typ. CCT
Bin Code Center Bin Code Center
parameter (K) parameter (K)
a 0.0054 a 0.00556
x 0.4578 x 0.4338
M0 b 0.0028 2700 N0 b 0.00272 3000
y 0.4101 y 0.4030
Ɵ˚ 53.70 Ɵ˚ 53.22
● Color range stay within MacAdam “2-step” ellipse from the chromaticity center.
● The chromaticity center refers to ANSI C78.377.
● Tolerance on each color bin (x , y) is ± 0.005
7
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Color Spectrum, TC = 25°C
1. White
1.0
Relative Spectral Power
0.6 White
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength (nm)
2. Neutral White
1.0
Standard Eye Response Curve
Relative Spectral Power
0.8
Neutral White
Distribution
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850 900
Wavelength (nm)
3. Warm White
1.0
Standard Eye Response Curve Warm White For R9
Relative Spectral Power
0.8
Warm White
0.6
Distribution
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength (nm)
8
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Case Temperature Relative Characteristics
105 38.0
37.0
Relative Luminous Flux (%)
100
36.0
70 30.0
25 35 45 55 65 75 85 95 105 25 35 45 55 65 75 85 95 105
Case Temperature (°C) Case Temperature (°C)
Fig 1. Case Temperature vs. Relative Luminous Fig 2. Case Temperature vs. Forward Voltage at
Flux at 270mA. 270mA.
White White
Neutral White, Warm White Neutral White, Warm White
0.005 0.005
0.000 0.000
-0.005 -0.005
∆y
∆x
-0.010 -0.010
-0.015 -0.015
-0.020 -0.020
25 35 45 55 65 75 85 95 105 25 35 45 55 65 75 85 95 105
Case Temperature (°C) Case Temperature (°C)
Fig 3. Case Temperature vs. Chromaticity Coordinate Fig 4. Case Temperature vs. Chromaticity Coordinate
Δx at 270mA. Δy at 270mA.
9
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Forward Current Relative Characteristics
600 2.0
1.8
1.4
400
1.2
300 1.0
0.8
200 0.6
0.4
100
0.2
0 0.0
25 30 35 40 45 0 100 200 300 400 500 600
Forward Voltage (V) Forward Current (mA)
Fig 5. Forward Current vs. Forward Voltage Fig 6. Forward Current vs. Relative Luminous Flux
at TC=25°C. at TC=25°C.
White White
Neutral White, Warm White Neutral White, Warm White
0.020 0.020
0.015 0.015
0.010 0.010
0.005 0.005
∆y
∆x
0.000 0.000
-0.005 -0.005
-0.010 -0.010
-0.015 -0.015
-0.020 -0.020
0 100 200 300 400 500 600 0 100 200 300 400 500 600
Fig 7. Forward Current vs. Chromaticity Coordinate Fig 8. Forward Current vs. Chromaticity Coordinate
Δx at TC=25°C. Δy at TC=25°C.
10
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Case Temperature vs. Junction Temperature Characteristics
TJ (°C)
TC (°C)
270 (mA) 540 (mA)
0 17 36
5 22 41
10 27 46
15 32 51
20 37 56
25 42 61
30 47 66
35 52 71
40 57 76
45 62 81
50 67 86
55 72 91
60 77 96
65 82 101
70 87 106
75 92 111
80 97 116
85 102 121
11
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Color Coordinate vs. Forward Current, TC = 25°C
White Binning Graphical Representation
270 mA 540 mA
0.42
0.40
0.38
5000 K
Planckian
V0
(BBL)
y
0.36
0.34
White
0.32
0.30
0.28 0.30 0.32 0.34 0.36 0.38 0.40
X
Neutral White Binning Graphical Representation
270 mA 540 mA
0.44
0.42
4000 K
0.40
S0 Planckian
(BBL)
0.38
y
0.36
0.34
Neutral White
0.32
0.32 0.34 0.36 0.38 0.40 0.42 0.44
12
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Color Coordinate vs. Forward Current, TC = 25°C
Warm White Binning Graphical Representation
270 mA 540 mA
0.48
0.46
0.44
2700 K
2940 K
3000 K
0.42 M0
N0 NC
y
Planckian
0.40 (BBL)
0.38
0.36
Warm White
0.34
0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52
13
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Typical Representative Spatial Radiation Pattern
Lambertian Radiation Pattern
100
90
80
Relative Intensity (%)
70
60
50
40
30
20
10
0
-100 -80 -60 -40 -20 0 20 40 60 80 100
Angular Displacement (Degrees)
14
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Packing Specifications
Product 30 pcs/tray
Notes:
1. Drawing not to scale.
2. All dimensions are in millimeters.
3. Unless otherwise indicated, tolerances are ± 0.20mm.
15
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Assembly note
Regarding the high power density of LED Array, it is strongly recommend to use thermal grease and screws.
In order to reduce thermal resistance at assembly, it is necessary to use TIM (thermal interface Material)
uniformly and tighten screws on heatsink, otherwise the bad thermal resistance may cause the packages
burned out.
screw
TIM
Heatsink
16
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world
Recommended Soldering Condition
● Please use lead free and “no clean ” solders.
● Soldering shall be implemented using a soldering tip at a temperature lower than 350 ℃, and shall
be finished within 3.5 seconds for each pad.
● During the soldering process, put the LEDs on materials whose conductivity is poor enough not to
● Contacts number of a soldering tip should be within twice for each pad.
● Next process of soldering should be carried out after the LEDs have return to ambient temperature.
must be taken when working with the modules. Non-compliance with ESD protection
measures may lead to damage or destruction of the product.
● Chemical solvents or cleaning agents must not be used to clean the modules.
Mechanical stress on the Emitters must be avoided. It is best to use a soft brush, damp
cloth or low-pressure compressed air.
● The products should be stored away from direct light in dry location.
● The appearance, specifications and flux bin of the product may be modified for improvement
without notice. Please refer to the below website for the latest datasheets.
http://www.prolightopto.com/
● Please store the LEDs away from dusty areas or seal the product against dust.
● Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)
17
No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,
Taiwan (R.O.C.)
Tel :+886-3-461-8618
Fax :+886-3-461-8677
www.prolightopto.com
We Provide the Light to the world