Académique Documents
Professionnel Documents
Culture Documents
Globe Valve, Iron Body, ANSI 125# Flanged 24 VAC, NEMA 2 - Non-Spring
Description
The GV Series 23 electric assemblies are available in non- spring
return two-way and three-way configurations 2½”- 6”. Two-way
assemblies are complete with cast iron bodies, brass plug, EPDM
O-ring, and mounted with a non-spring return NEMA 2 actuator.
Three-way mixing assemblies are complete with cast iron bodies,
brass plug, and mounted with a non-spring return NEMA 2
actuator. Three-way diverting assemblies are complete with cast
Iron bodies, brass plug, and mounted with a non-spring return
electric actuator.
Operation
Valve assemblies with NEMA 2 electronic actuators are powered
by 24 VAC low voltage. Each actuator is controlled by either
on/off-floating or modulating commands. All actuators contain
either current limiting circuitry, or microprocessor overload
protection. The brush-less DC motors provide continuous rotary
power for accurate, automatic, valve positioning. Series 23 non-
spring return actuators are equipped with a manual override for
manual valve positioning upon loss of power. All valve assemblies
are factory mounted, tested, and calibrated.
Actuator Performance Flow Arrangement
Housing protection NEMA 2 (indoor applications) limited 2-Way Mixing Diverting
resistance to small amounts of falling dirt and water
Agency approved listings C.S.A.,CE, UL and ISO 9001
A AB A AB U L
Power supply 24 VAC 50/60 Hz
Controls available are on/off, modulating or floating
Manual override capabilities standard on each actuator
Visual position indicator that confirms valve travel B C
Approximate running time 2 minutes for full 90° travel
Noise level: 45 dBA maximum Valve Construction
Operating temperature -40°F to +120°F 2-Way
Electrical connection 3FT,18 gauge appliance cable 1 Body: Cast Iron 6
1
Microprocessor overload protection 2 Connection: Flanged 125# 5
Series 23 non-spring 3 Seat: Metal A AB
2
4 Plug: Bronze / Optional: Stainless 4
Valve Specifications
5 Stem: Stainless Steel
2-Way 3
6 Packing: PTFE
Service: Chilled or Hot Water, 50% Glycol, Steam
Flow Type: Equal Percentage
3-Way Mixing 6
Stem Up: A to AB Open 1
ANSI Class: 125# (up to 200 psi below 150°F) 1 Body: Cast Iron 5
Leakage ANSI Class IV 2 Connection: Flanged 125# 2 A AB
Brass Trim:
3 Seat: Metal
Media Temp: 20°F to 250°F / Max Steam 15 psi
Maximum Differential: Water 25 psi, Steam 15 psi 4 Plug: Bronze
Stainless Trim: 5 Stem: Stainless Steel 3
Media Temp: 20°F to 337°F / Max Steam 50 psi 4
6 Packing: PTFE B
Maximum Differential: Water 50 psi, Steam 50 psi
2-Way
A D
B
A1 Drawing
A AB
C
A D
B
A2 Drawing
A AB
C
Standard Assembly: Cast Iron Body, Bronze Plug, On/Off-Floating (Stainless Plug Change Last B to S, See Page 4 Assembly Number)
Modulating Service Change Last O to E in Model Number, For Accessories See page 4,Wiring under “Electrical Section” Series 23
B
B
A AB A AB
B1 Drawing B C B2 Drawing B
C
E E
3-Way Diverting A D
U L
C C
E
Standard Assembly: Cast Iron Body, Bronze Plug, On/Off-Floating
Modulating Service Change Last O to E in Model Number, For Accessories See page 4,Wiring under “Electrical Section” Series 23
Assembly Specification Speed Amp draw 23 Series Assembly Dimensions (Inches)
Size Cv Model Number Close Wt. Open Close operator
in Psi lb
(sec.) (sec.) on/off mod. on/off mod. A B C D E
2½” 68 GVDALFX230 75 105 150 150 4.0 4.0 XT-221-F1 XT-221-M1 8.0 16.0 7 1/8 14.0 9.0
2½” 68 GVDAHFX230 100 105 150 150 6.0 6.0 XT-310-F1 XT-310-M1 8.0 16.0 7 1/8 14.0 9.0
3” 85 GVDBLFX230 75 130 150 150 4.0 4.0 XT-221-F1 XT-221-M1 8.0 17.0 8.0 14.0 10.0
3” 85 GVDBHFX230 100 130 150 150 6.0 6.0 XT-310-F1 XT-310-M1 8.0 17.0 8.0 14.0 10.0
4” 160 GVDCLFX230 75 200 150 150 4.0 4.0 XT-221-F1 XT-221-M1 9.0 18.0 9 7/8 14.0 13.0
4” 160 GVDCHFX230 100 200 150 150 6.0 6.0 XT-310-F1 XT-310-M1 9.0 18.0 9 7/8 14.0 13.0
5” 195 GVDDHFX230 100 250 150 150 6.0 6.0 XT-310-F1 XT-310-M1 9.0 19.0 10 1/2 14.0 12.0
6” 250 GVDEHFX230 100 340 150 150 6.0 6.0 XT-310-F1 XT-310-M1 9.0 20.0 11 /8 1
14.0 14 1/8
Assembly Number
Series Config Size Type Disc/Seat Actuator Controls Accessories
GV 2 CL F X 23 E
1 2 3 4 5 6 7 8
1. Series 4. Valve Type 7. Controls
GV = GV Globe Valve F = ANSI 125# Flanged O = On/Off - Floating
E = Modulating 0-10 VDC input/output
2. Configuration 5. Construction
2 = 2-way 8. Accessories
M = 3-way Mixing X = Cast Iron Body / Bronze Plug
Y = Cast Iron Body / Stainless Plug
D = 3-way Diverting A = Auxiliary Switch 2-SPDT
3. Size 6. Actuator
2½” A = L, M, H 23 = Non-Spring / 24 VAC
3” B = L, M, H
4” C = L, M, H L =Low
5” D = L, M, H M=Medium
6” E = L, M, H H=High
Close Off
8” F = L, M, H
10” G = L, M, H
12” H = L, M, H
Please specify 3-Way Configuration Located on Front of Brochure
Gold Seal Warranty: 2 Years Limited Warranty