Académique Documents
Professionnel Documents
Culture Documents
Features
Virgin PTFE seats and seals are standard Suitable for a full range of liquids and gases Minimal pressure drop due to full port design Blowout proof pressure retaining stem Pressure rated at 600psi (41 bar) WOG non-shock; 150psi (10 bar) WSP Virgin PTFE stem packing seal and thrust washer Vinyl insulator on heavy duty, zinc-plated carbon steel handles Fast quarter-turn open or close operation Excellent for throttling and balancing applications of nonabrasive fluids where minimum flow is 20% to 100% of valve capacity Low operating torque Adjustable stem packing Each valve factory tested
B6081
BAA/ARRA Compliant*
*This product complies with the Buy American Act and The American Recovery and Reinvestment Act. For more information, visit watts.com.
Options
Suffix SS OV RH SH BS XH TH G GS Stainless steel ball and stem Oval handle Round handle 304 Stainless steel handle and nut Balancing stop Extended handle Tee handle All SS models (grounded ball & stem) Ground washer
Models
B6080 B6081
12 12
" 2" (15 50mm) threaded NPT end connections " 2" (15 50mm) solder end connections
Specifications
A 2-piece full port bronze ball valve to be installed as indicated on the plans. The valve must have a blowout proof pressure retaining stem, chrome plated brass ball, virgin PTFE seats, seals, stem packing seal and thrust washer. Valve must have adjustable packing. Valves with O-ring stem seal only is not acceptable. Pressure rating no less than 600psi (41 bar) WOG non-shock, 150psi (10 bar) WSP. Valve shall be manufactured to the MSS-SP-110 standard and shall be a Watts Regulator Company Series B6080 (threaded) or B6081 (solder).
**This valve is designed to be soft soldered into lines without disassembly, using a low temperature solder 420F (215C). Other solders such as 95/5 tin antimony 460F (238C) can be used. However, extreme caution must be used to prevent seat damage. Higher temperature solders will damage the seat material. ANSI B.15.18 states that the maximum operating pressure of 50-50 solder connections is 200psi (14 bar) at 100F (38C) and decreases with higher temperature. Apply heat with the flame directed AWAY from the center of the valve body. Excessive heat can harm the seats. After soldering, the packing nut may have to be tightened.
Pressure Temperature
Temperature Range: 0F - 350F (-18C 177C) @ 50psi (3.5 bar) Maximum Working Pressure: 600psi (41 bar) WOG non-shock; 150psi (10 bar) WSP
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Materials
A B
Pressure H I H K J
C D G E F
Temperature
A Handle Nut
B Handle Zinc Plated Carbon Steel with Vinyl Insulator C Packing Nut Brass ASTM B16, C36000 D Stem Packing PTFE E Thrust Washer PTFE F Stem G Body H Seats I Ball J Adapter K Body Seal Brass ASTM B16, C36000 Bronze ASTM B584, C84400 Virgin PTFE Chrome Plated Brass Brass ASTM B16, C36000 PTFE (1 " 2")
14
1 114 112 2
12 34
15 20 25 32 40 50
"
34
"
2"
Dimensions Weights
Pressure Drop D L
.7 .1 1 3.8 10 8 6 4 3 2 38 30.4 22.8 15.2 11.4 7.6 100 80 60 40 30 20 380 304 228 152 114 76 1000 800 600 400 300 200 3800 3040 2280 1520 1140 760 gpm lpm 2000 7600
Flow
Size (Dn) in. Ball Orifice in. mm A (B6080) in. mm in. A (B6081) mm in. C
weights
mm
lbs.
kgs.
34 1 114 112 2
12
15 20 25 32 40 50
34 1 114 112 2
12
13 19 25 32 38 51
41 45 51 73 76 102
22 25 32 38 41 51
USA: No. Andover, MA Tel. (978) 688-1811 Fax: (978) 794-1848 www.watts.com Canada: Burlington, ONT. Tel. (905) 332-4090 Fax: (905) 332-7068 www.wattscanada.ca
ES-B6080 1038
2010 Watts