Vous êtes sur la page 1sur 32

Limit state capacity tables

Double lapped spans

Double lapped spans


Lap

Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

zeds & cees user's guide


33
Limit state capacity tables
Double lapped spans

Double lapped spans


Lap

Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Double lapped span: Z1)5019 (kN/m 4 Double lapped span: Z1)502 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2, 3 0 1 2 3 span/150 0 1 2, 3 0 1 2 3 span/150
Span 2400 20.06 20.06 20.06 20.06 20.06 20.06 20.06 41.39 21.18 21.18 21.18 21.18 21.18 21.18 21.18 55.20
(mm) 2700 15.80 16.03 16.03 16.03 16.03 16.03 16.03 28.73 18.88 18.88 18.88 18.88 18.88 18.88 18.88 38.31
3000 12.63 13.12 13.12 13.12 13.12 13.12 13.12 20.70 17.03 17.03 17.03 17.03 17.03 17.03 17.03 27.61
3300 10.31 10.94 10.94 10.94 10.94 10.94 10.94 15.38 13.92 15.42 15.42 15.42 15.42 15.42 15.42 20.51
3600 8.58 9.27 9.27 9.27 9.27 9.27 9.27 11.72 11.49 13.06 13.06 13.06 13.06 13.06 13.06 15.64
3900 4.75 7.55 7.55 6.84 7.55 7.55 7.55 9.13 5.66 10.64 10.64 9.48 10.64 10.64 10.64 12.18
4200 3.93 6.22 6.22 5.46 6.22 6.22 6.22 7.25 4.67 8.77 8.77 7.53 8.77 8.77 8.77 9.66
4500 3.30 5.22 5.22 4.42 5.22 5.22 5.22 5.84 3.92 7.36 7.36 6.08 7.36 7.36 7.36 7.79
4800 2.80 4.44 4.44 3.59 4.44 4.44 4.44 4.78 3.33 6.26 6.26 4.93 6.26 6.26 6.26 6.37
5100 2.41 3.83 3.83 2.95 3.83 3.83 3.83 3.96 2.86 5.40 5.40 3.99 5.40 5.40 5.40 5.28
5400 2.09 3.34 3.34 2.42 3.32 3.34 3.34 3.31 2.48 4.69 4.70 3.27 4.70 4.70 4.70 4.42
5700 1.83 2.93 2.93 2.01 2.85 2.93 2.93 2.80 2.17 4.08 4.13 2.71 4.05 4.13 4.13 3.73
6000 1.61 2.58 2.60 1.69 2.47 2.60 2.60 2.39 1.92 3.57 3.66 2.27 3.49 3.66 3.66 3.18
6300 1.43 2.29 2.32 1.44 2.16 2.32 2.32 2.05 1.70 3.16 3.26 1.91 3.04 3.26 3.26 2.74
6600 1.28 2.04 2.08 1.23 1.89 2.08 2.08 1.78 1.52 2.81 2.93 1.63 2.65 2.93 2.93 2.37
6900 1.14 1.83 1.88 1.05 1.67 1.88 1.88 1.56 1.36 2.51 2.65 1.40 2.33 2.65 2.65 2.07
7200 1.03 1.64 1.70 0.91 1.48 1.70 1.70 1.38 1.23 2.26 2.40 1.21 2.06 2.40 2.40 1.82
7500 0.93 1.49 1.55 0.79 1.31 1.55 1.55 1.22 1.11 2.04 2.19 1.05 1.83 2.19 2.19 1.61
7800 0.85 1.35 1.42 0.69 1.16 1.39 1.42 1.09 1.01 1.85 2.00 0.92 1.62 1.98 2.00 1.43
8100 0.77 1.23 1.31 0.60 1.03 1.26 1.31 0.98 0.92 1.68 1.84 0.81 1.44 1.79 1.84 1.28
8400 0.70 1.13 1.20 0.53 0.92 1.14 1.20 0.88 0.84 1.54 1.70 0.72 1.27 1.61 1.70 1.15
8700 0.64 1.03 1.11 0.47 0.81 1.04 1.11 0.80 0.77 1.41 1.57 0.64 1.12 1.46 1.57 1.04
9000 0.59 0.95 1.03 0.42 0.72 0.94 1.03 0.72 0.71 1.29 1.46 0.57 1.00 1.33 1.46 0.94
9300 0.55 0.92 1.03 0.67 0.91 1.02 0.67 0.66 1.24 1.45 0.53 0.91 1.27 1.45 0.87
9600 0.51 0.85 0.96 0.60 0.83 0.94 0.61 0.61 1.14 1.35 0.48 0.82 1.16 1.34 0.79
9900 0.47 0.78 0.89 0.54 0.76 0.86 0.56 0.57 1.06 1.26 0.43 0.73 1.06 1.23 0.72
10200 0.43 0.73 0.83 0.49 0.69 0.80 0.51 0.53 0.98 1.17 0.66 0.97 1.13 0.65
10500 0.40 0.67 0.77 0.44 0.63 0.73 0.46 0.49 0.91 1.08 0.60 0.88 1.04 0.60
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
DL150.2
zeds & cees user's guide
34
Limit state capacity tables

Double lapped spans

Double lapped spans


Lap

Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

zeds & cees user's guide


35
Limit state capacity tables
Double lapped spans

Double lapped spans


Lap

Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Double lapped span: Z2)0019 (kN/m 4 Double lapped span: Z2)002 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2,3 0 1 2 3 span/150 0 1 2,3 0 1 2 3 span/150
Span 3000 17.00 17.00 17.00 17.00 17.00 17.00 17.00 44.69 17.03 17.03 17.03 17.03 17.03 17.03 17.03 59.02
(mm) 3300 14.16 14.16 14.16 14.16 14.16 14.16 14.16 33.21 15.51 15.51 15.51 15.51 15.51 15.51 15.51 43.85
3600 11.94 11.94 11.94 11.94 11.94 11.94 11.94 25.31 14.25 14.25 14.25 14.25 14.25 14.25 14.25 33.42
3900 7.09 10.18 10.18 10.18 10.18 10.18 10.18 19.72 8.88 13.18 13.18 13.18 13.18 13.18 13.18 26.04
4200 5.82 8.77 8.77 8.77 8.77 8.77 8.77 15.65 7.24 12.25 12.25 12.25 12.25 12.25 12.25 20.66
4500 4.86 7.61 7.61 7.61 7.61 7.61 7.61 12.62 6.01 11.12 11.12 10.51 11.12 11.12 11.12 16.66
4800 4.12 6.51 6.51 6.39 6.51 6.51 6.51 10.32 5.06 9.46 9.46 8.70 9.46 9.46 9.46 13.63
5100 3.53 5.61 5.61 5.31 5.61 5.61 5.61 8.54 4.32 8.15 8.15 7.28 8.15 8.15 8.15 11.28
5400 3.06 4.88 4.88 4.45 4.88 4.88 4.88 7.15 3.73 7.10 7.10 6.16 7.10 7.10 7.10 9.44
5700 2.67 4.29 4.29 3.70 4.29 4.29 4.29 6.05 3.25 6.24 6.24 5.19 6.24 6.24 6.24 7.98
6000 2.36 3.80 3.80 3.02 3.80 3.80 3.80 5.16 2.85 5.53 5.53 4.38 5.53 5.53 5.53 6.81
6300 2.09 3.39 3.39 2.58 3.39 3.39 3.39 4.43 2.52 4.90 4.93 3.71 4.93 4.93 4.93 5.85
6600 1.87 3.05 3.05 2.22 3.05 3.05 3.05 3.84 2.25 4.36 4.43 3.17 4.43 4.43 4.43 5.06
6900 1.67 2.75 2.75 1.93 2.75 2.75 2.75 3.34 2.01 3.90 4.00 2.73 3.96 4.00 4.00 4.41
7200 1.51 2.50 2.50 1.68 2.50 2.50 2.50 2.93 1.81 3.51 3.63 2.37 3.53 3.63 3.63 3.87
7500 1.37 2.28 2.28 1.48 2.28 2.28 2.28 2.58 1.64 3.17 3.31 2.07 3.15 3.31 3.31 3.41
7800 1.24 2.08 2.08 1.30 2.07 2.08 2.08 2.29 1.49 2.88 3.03 1.80 2.83 3.03 3.03 3.02
8100 1.13 1.91 1.91 1.16 1.86 1.91 1.91 2.04 1.35 2.63 2.78 1.57 2.55 2.78 2.78 2.69
8400 1.04 1.76 1.76 1.02 1.67 1.76 1.76 1.82 1.24 2.40 2.57 1.39 2.31 2.57 2.57 2.40
8700 0.95 1.63 1.63 0.90 1.50 1.63 1.63 1.63 1.14 2.21 2.37 1.22 2.09 2.37 2.37 2.16
9000 0.87 1.51 1.51 0.80 1.35 1.51 1.51 1.48 1.05 2.03 2.20 1.09 1.90 2.20 2.20 1.96
9300 0.82 1.48 1.51 0.74 1.21 1.51 1.51 1.37 0.97 1.96 2.19 1.00 1.79 2.17 2.19 1.82
9600 0.75 1.37 1.40 0.67 1.09 1.40 1.40 1.25 0.90 1.81 2.04 0.89 1.60 1.99 2.04 1.66
9900 0.70 1.26 1.31 0.60 0.99 1.31 1.31 1.14 0.83 1.68 1.90 0.80 1.44 1.83 1.90 1.52
10200 0.65 1.17 1.22 0.54 0.90 1.22 1.22 1.04 0.78 1.56 1.78 0.72 1.30 1.68 1.78 1.39
10500 0.60 1.09 1.15 0.49 0.82 1.13 1.15 0.96 0.72 1.45 1.67 0.65 1.18 1.56 1.67 1.28
10800 0.56 1.01 1.08 0.44 0.75 1.04 1.08 0.88 0.67 1.35 1.57 0.59 1.07 1.44 1.57 1.18
11100 0.52 0.94 1.01 0.40 0.68 0.96 1.01 0.81 0.63 1.26 1.47 0.54 0.98 1.33 1.47 1.09
11400 0.49 0.88 0.95 0.63 0.89 0.95 0.75 0.59 1.17 1.39 0.49 0.89 1.24 1.39 1.01
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11700 0.46 0.82 0.90 0.58 0.82 0.90 0.69 0.55 1.09 1.31 0.45 0.82 1.15 1.30 0.94
12000 0.43 0.77 0.85 0.53 0.75 0.85 0.64 0.52 1.02 1.23 0.41 0.75 1.07 1.21 0.87
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
DL200.2
zeds & cees user's guide
36
Limit state capacity tables
Double lapped spans
Double lapped spans
Lap

Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)

Double lapped span: Z2)5019 (kN/m 4 Double lapped span: Z2)502 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2, 3 0 1 2 3 span/150 0 1 2, 3 0 1 2 3 span/150
Span 3000 15.13 15.13 15.13 15.13 15.13 15.13 15.13 72.59 17.03 17.03 17.03 17.03 17.03 17.03 17.03 100.20
(mm) 3300 13.00 13.00 13.00 13.00 13.00 13.00 13.00 53.93 15.51 15.51 15.51 15.51 15.51 15.51 15.51 74.38
3600 11.28 11.28 11.28 11.28 11.28 11.28 11.28 41.11 14.25 14.25 14.25 14.25 14.25 14.25 14.25 56.70
3900 9.11 9.88 9.88 9.88 9.88 9.88 9.88 32.02 11.10 13.18 13.18 13.18 13.18 13.18 13.18 44.17
4200 7.47 8.72 8.72 8.72 8.72 8.72 8.72 25.41 9.04 12.25 12.25 12.25 12.25 12.25 12.25 35.05
4500 6.23 7.74 7.74 7.74 7.74 7.74 7.74 20.49 7.49 11.45 11.45 11.45 11.45 11.45 11.45 28.26
4800 5.27 6.91 6.91 6.91 6.91 6.91 6.91 16.76 6.30 10.75 10.75 10.75 10.75 10.75 10.75 23.11
5100 4.51 6.20 6.20 6.20 6.20 6.20 6.20 13.88 5.37 10.13 10.13 9.70 10.13 10.13 10.13 19.14
5400 3.91 5.59 5.59 5.59 5.59 5.59 5.59 11.61 4.63 9.06 9.06 8.12 9.06 9.06 9.06 16.02
5700 3.41 5.07 5.07 4.90 5.07 5.07 5.07 9.82 4.03 8.00 8.00 6.82 8.00 8.00 8.00 13.54
6000 3.00 4.61 4.61 4.00 4.61 4.61 4.61 8.37 3.53 7.09 7.09 5.71 7.09 7.09 7.09 11.55
6300 2.66 4.20 4.20 3.41 4.20 4.20 4.20 7.20 3.12 6.32 6.32 4.82 6.32 6.32 6.32 9.93
6600 2.37 3.85 3.85 2.93 3.85 3.85 3.85 6.23 2.78 5.68 5.68 4.11 5.68 5.68 5.68 8.59
6900 2.12 3.49 3.49 2.53 3.49 3.49 3.49 5.43 2.49 5.13 5.13 3.53 5.13 5.13 5.13 7.49
7200 1.91 3.17 3.17 2.20 3.17 3.17 3.17 4.76 2.24 4.65 4.65 3.06 4.65 4.65 4.65 6.56
7500 1.72 2.89 2.89 1.93 2.89 2.89 2.89 4.19 2.02 4.22 4.24 2.65 4.22 4.24 4.24 5.78
7800 1.56 2.64 2.64 1.70 2.64 2.64 2.64 3.72 1.83 3.82 3.88 2.30 3.78 3.88 3.88 5.12
8100 1.42 2.43 2.43 1.50 2.43 2.43 2.43 3.31 1.67 3.48 3.57 2.01 3.40 3.57 3.57 4.56
8400 1.30 2.24 2.24 1.31 2.23 2.24 2.24 2.96 1.53 3.18 3.29 1.76 3.07 3.29 3.29 4.08
8700 1.19 2.07 2.07 1.16 2.00 2.07 2.07 2.65 1.40 2.92 3.04 1.56 2.77 3.04 3.04 3.66
9000 1.10 1.92 1.92 1.03 1.78 1.92 1.92 2.39 1.29 2.68 2.82 1.38 2.49 2.82 2.82 3.30
9300 1.02 1.92 1.92 0.95 1.60 1.92 1.92 2.22 1.20 2.58 2.81 1.26 2.33 2.81 2.81 3.05
9600 0.95 1.78 1.78 0.85 1.44 1.78 1.78 2.01 1.11 2.38 2.62 1.12 2.08 2.62 2.62 2.77
9900 0.88 1.66 1.66 0.76 1.30 1.66 1.66 1.83 1.02 2.19 2.44 1.01 1.87 2.44 2.44 2.52
10200 0.81 1.55 1.55 0.69 1.18 1.55 1.55 1.66 0.95 2.03 2.28 0.90 1.68 2.25 2.28 2.30
10500 0.76 1.44 1.46 0.62 1.07 1.46 1.46 1.52 0.88 1.88 2.14 0.81 1.52 2.08 2.14 2.10
10800 0.70 1.34 1.37 0.56 0.98 1.37 1.37 1.40 0.82 1.74 2.01 0.74 1.38 1.92 2.01 1.92
11100 0.66 1.24 1.29 0.50 0.89 1.29 1.29 1.28 0.77 1.62 1.89 0.67 1.26 1.77 1.89 1.78
11400 0.61 1.15 1.21 0.46 0.82 1.19 1.21 1.18 0.72 1.51 1.78 0.61 1.15 1.64 1.78 1.64
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11700 0.57 1.07 1.14 0.41 0.75 1.09 1.14 1.10 0.67 1.41 1.68 0.55 1.05 1.52 1.68 1.52
12000 0.54 1.00 1.08 0.69 1.00 1.08 1.03 0.63 1.31 1.59 0.51 0.95 1.40 1.59 1.42
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
DL250
zeds & cees user's guide
37
Limit state capacity tables

Double lapped spans

Double lapped spans


Lap

Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Double lapped span: Z3)0024 (kN/m 0 Double lapped span: Z3)003 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2, 3 0-0 1 2 3 span/150 0 1 2 3 0 1 2 3 span/150
Span 6000 5.26 8.51 8.51 8.51 8.51 8.51 8.51 19.16 6.18 13.28 13.28 13.28 13.28 13.28 13.28 13.28 25.57
(mm) 6300 4.61 7.80 7.80 7.80 7.80 7.80 7.80 16.47 5.40 12.05 12.05 12.05 11.73 12.05 12.05 12.05 21.97
6600 4.06 7.17 7.17 7.17 7.17 7.17 7.17 14.26 4.75 10.98 10.98 10.98 10.29 10.98 10.98 10.98 19.02
6900 3.61 6.61 6.61 6.59 6.61 6.61 6.61 12.42 4.21 10.04 10.04 10.04 9.08 10.04 10.04 10.04 16.58
7200 3.23 6.12 6.12 5.72 6.12 6.12 6.12 10.89 3.75 9.11 9.11 9.11 8.00 9.11 9.11 9.11 14.53
7500 2.90 5.67 5.67 4.99 5.67 5.67 5.67 9.60 3.37 8.30 8.30 8.30 7.01 8.30 8.30 8.30 12.81
7800 2.62 5.27 5.27 4.37 5.27 5.27 5.27 8.50 3.03 7.54 7.60 7.60 6.15 7.60 7.60 7.60 11.35
8100 2.38 4.90 4.90 3.80 4.90 4.90 4.90 7.57 2.75 6.86 6.98 6.98 5.44 6.98 6.98 6.98 10.10
8400 2.17 4.51 4.51 3.39 4.51 4.51 4.51 6.77 2.50 6.26 6.44 6.44 4.78 6.44 6.44 6.44 9.03
8700 1.98 4.18 4.18 3.04 4.18 4.18 4.18 6.07 2.29 5.74 5.95 5.95 4.22 5.95 5.95 5.95 8.10
9000 1.82 3.87 3.87 2.73 3.87 3.87 3.87 5.47 2.10 5.27 5.52 5.52 3.74 5.52 5.52 5.52 7.30
9300 1.69 3.86 3.86 2.58 3.86 3.86 3.86 5.07 1.94 5.10 5.51 5.51 3.43 5.45 5.51 5.51 6.76
9600 1.56 3.55 3.59 2.31 3.59 3.59 3.59 4.59 1.79 4.71 5.12 5.12 3.06 5.00 5.12 5.12 6.13
9900 1.44 3.28 3.35 2.08 3.35 3.35 3.35 4.18 1.66 4.35 4.78 4.78 2.73 4.59 4.78 4.78 5.57
10200 1.34 3.03 3.13 1.88 3.10 3.13 3.13 3.81 1.54 4.03 4.47 4.47 2.45 4.23 4.47 4.47 5.08
10500 1.24 2.81 2.93 1.70 2.85 2.93 2.93 3.48 1.43 3.75 4.18 4.18 2.21 3.91 4.18 4.18 4.65
10800 1.16 2.62 2.75 1.53 2.62 2.75 2.75 3.19 1.33 3.48 3.93 3.93 2.00 3.61 3.93 3.93 4.26
11100 1.08 2.44 2.59 1.39 2.41 2.59 2.59 2.93 1.25 3.23 3.69 3.69 1.81 3.35 3.69 3.69 3.91
11400 1.01 2.27 2.44 1.26 2.20 2.44 2.44 2.70 1.17 3.01 3.48 3.48 1.64 3.10 3.48 3.48 3.61
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11700 0.95 2.12 2.30 1.15 2.02 2.30 2.30 2.49 1.09 2.80 3.29 3.29 1.50 2.86 3.29 3.29 3.33
12000 0.89 1.98 2.18 1.05 1.85 2.18 2.18 2.31 1.03 2.62 3.11 3.11 1.37 2.63 3.11 3.11 3.08
12300 0.85 1.91 2.30 1.00 1.78 2.30 2.30 2.22 0.98 2.55 3.27 3.27 1.31 2.57 3.25 3.27 2.96
12600 0.80 1.79 2.17 0.91 1.64 2.17 2.17 2.06 0.92 2.38 3.10 3.10 1.20 2.36 3.04 3.10 2.75
12900 0.75 1.68 2.06 0.84 1.52 2.06 2.06 1.91 0.87 2.22 2.93 2.93 1.10 2.17 2.85 2.93 2.55
13200 0.71 1.57 1.95 0.77 1.41 1.95 1.95 1.78 0.82 2.08 2.78 2.78 1.01 1.99 2.67 2.78 2.38
13500 0.67 1.45 1.85 0.71 1.31 1.83 1.85 1.66 0.78 1.95 2.64 2.64 0.93 1.84 2.51 2.64 2.23
13800 0.64 1.37 1.76 0.65 1.22 1.72 1.76 1.56 0.74 1.83 2.51 2.51 0.86 1.69 2.36 2.51 2.09
14100 0.60 1.30 1.68 0.60 1.14 1.61 1.68 1.47 0.70 1.72 2.39 2.39 0.80 1.57 2.22 2.39 1.97
14400 0.57 1.22 1.60 0.56 1.07 1.51 1.60 1.39 0.66 1.62 2.27 2.28 0.74 1.45 2.09 2.28 1.85
14700 0.54 1.16 1.52 0.52 1.00 1.41 1.52 1.32 0.63 1.53 2.15 2.17 0.69 1.34 1.97 2.17 1.75
15000 0.52 1.10 1.46 0.48 0.93 1.32 1.46 1.25 0.60 1.45 2.05 2.08 0.64 1.25 1.86 2.08 1.65
15300 0.49 1.04 1.39 0.45 0.87 1.23 1.39 1.18 0.57 1.37 1.95 1.98 0.60 1.16 1.75 1.98 1.56
15600 0.47 0.99 1.33 0.42 0.81 1.16 1.33 1.12 0.55 1.29 1.85 1.90 0.56 1.08 1.65 1.89 1.48
15900 0.45 0.94 1.28 0.76 1.08 1.28 1.05 0.52 1.23 1.76 1.82 0.52 1.01 1.55 1.80 1.40
16200 0.43 0.90 1.22 0.71 1.02 1.22 1.00 0.50 1.16 1.68 1.75 0.49 0.94 1.45 1.71 1.33
16500 0.41 0.85 1.18 0.66 0.95 1.18 0.94 0.48 1.10 1.60 1.68 0.46 0.88 1.37 1.62 1.26
16800 0.81 1.13 0.62 0.88 1.13 0.90 0.46 1.05 1.53 1.61 0.43 0.82 1.29 1.55 1.20
zeds & cees user's guide

17100 0.78 1.09 0.58 0.83 1.08 0.85 0.44 1.00 1.46 1.55 0.41 0.77 1.21 1.47 1.14
17400 0.74 1.04 0.54 0.79 1.02 0.81 0.42 0.95 1.40 1.49 0.72 1.14 1.40 1.08
17700 0.71 1.00 0.51 0.75 0.97 0.77 0.40 0.91 1.34 1.43 0.68 1.07 1.34 1.03
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
DL300
38
Limit state capacity tables

Double lapped spans

Double lapped spans


Lap

Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Double lapped span: Z3)5030 (kN/m
IN T OU Load for
deflection
Bridging > 0 1 2,3 0 1 2 3 span/150
Span 6000 9.33 14.61 14.61 14.61 14.61 14.61 14.61 39.69
(mm) 6300 8.08 13.41 13.41 13.41 13.41 13.41 13.41 34.11
6600 7.05 12.35 12.35 12.35 12.35 12.35 12.35 29.53
6900 6.21 11.40 11.40 11.40 11.40 11.40 11.40 25.73
7200 5.51 10.56 10.56 10.56 10.56 10.56 10.56 22.56
7500 4.92 9.80 9.80 9.80 9.80 9.80 9.80 19.88
7800 4.41 9.11 9.11 9.11 9.11 9.11 9.11 17.61
8100 3.97 8.49 8.49 8.49 8.49 8.49 8.49 15.67
8400 3.59 7.88 7.88 7.64 7.88 7.88 7.88 14.01
8700 3.26 7.29 7.29 6.89 7.29 7.29 7.29 12.57
9000 2.97 6.76 6.76 6.19 6.76 6.76 6.76 11.33
9300 2.73 6.74 6.74 5.78 6.74 6.74 6.74 10.50
9600 2.51 6.27 6.27 5.19 6.27 6.27 6.27 9.52
9900 2.31 5.85 5.85 4.68 5.85 5.85 5.85 8.65
10200 2.13 5.47 5.47 4.23 5.47 5.47 5.47 7.89
10500 1.97 5.10 5.12 3.84 5.12 5.12 5.12 7.21
10800 1.83 4.74 4.81 3.49 4.81 4.81 4.81 6.61
11100 1.71 4.40 4.52 3.11 4.52 4.52 4.52 6.08
11400 1.59 4.10 4.26 2.86 4.26 4.26 4.26 5.60
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11700 1.49 3.83 4.02 2.63 4.02 4.02 4.02 5.17


12000 1.39 3.58 4.01 2.43 4.01 4.01 4.01 4.78
12300 1.32 3.50 4.01 2.40 4.01 4.01 4.01 4.60
12600 1.24 3.26 3.79 2.23 3.74 3.74 3.74 4.26
12900 1.17 3.05 3.59 2.06 3.49 3.59 3.59 3.96
13200 1.10 2.85 3.40 1.90 3.26 3.40 3.40 3.69
13500 1.04 2.67 3.23 1.75 3.04 3.23 3.23 3.44
13800 0.99 2.51 3.07 1.62 2.83 3.07 3.07 3.22
14100 0.93 2.36 2.92 1.51 2.64 2.92 2.92 3.01
14400 0.89 2.22 2.79 1.40 2.46 2.79 2.79 2.82
14700 0.84 2.10 2.66 1.30 2.29 2.66 2.66 2.65
15000 0.80 1.98 2.54 1.22 2.14 2.54 2.54 2.49
15300 0.76 1.88 2.43 1.14 2.00 2.43 2.43 2.34
15600 0.73 1.78 2.33 1.06 1.87 2.33 2.33 2.20
15900 0.69 1.68 2.23 0.99 1.75 2.23 2.23 2.09
16200 0.66 1.60 2.14 0.92 1.65 2.14 2.14 1.99
16500 0.63 1.52 2.05 0.86 1.55 2.05 2.05 1.89
16800 0.60 1.44 1.97 0.81 1.45 1.97 1.97 1.80
17100 0.58 1.38 1.89 0.76 1.33 1.89 1.89 1.71
17400 0.55 1.28 1.82 0.71 1.26 1.81 1.82 1.63
17700 0.53 1.22 1.75 0.67 1.19 1.72 1.75 1.55
zeds & cees user's guide

Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
DL350
39
Limit state capacity tables

Three continuous spans

Three spans

Span (mm) Span (mm) Span (mm)

Overall purlin length = 3 x span + 70 mm


zeds & cees user's guide
40
Limit state capacity tables

Three continuous spans

Three spans

Span (mm) Span (mm) Span (mm)

Overall purlin length = 3 x span + 70 mm

zeds & cees user's guide


41
Limit state capacity tables

Three continuous spans

Three spans

Span (mm) Span (mm) Span (mm)

Overall purlin length = 3 x span + 70 mm


zeds & cees user's guide
42
Limit state capacity tables

Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap

zeds & cees user's guide


43
Limit state capacity tables
Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap
zeds & cees user's guide
44
Limit state capacity tables
Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap

zeds & cees user's guide


45
Limit state capacity tables

Three lapped spans


Three lapped spans
Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap

Three lapped span: Z15)019 (kN/m 4 Three lapped span: Z15)02 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2 3 0 1 2 3 span/150 0 1 2 3 0 1 2 3 span/150
Span 3000 9.20 12.83 12.83 12.83 12.69 12.83 12.83 12.83 14.57 11.31 18.08 18.08 18.08 18.00 18.08 18.08 18.08 19.43
(mm) 3300 7.22 10.56 10.56 10.56 9.94 10.56 10.56 10.56 10.90 8.78 14.88 14.88 14.88 13.94 14.88 14.88 14.88 14.53
3600 5.82 8.84 8.84 8.84 7.90 8.84 8.84 8.84 8.36 7.01 12.46 12.46 12.46 10.97 12.46 12.46 12.46 11.14
3900 4.78 7.51 7.51 7.51 6.33 7.51 7.51 7.51 6.54 5.71 10.58 10.58 10.58 8.75 10.58 10.58 10.58 8.73
42 0 0 4.00 6.45 6.45 6.45 5.05 6.45 6.45 6.45 5.23 4.74 9.09 9.09 9.09 6.87 9.09 9.09 9.09 6.98
45 0 0 3.39 5.61 5.61 5.61 4.00 5.60 5.61 5.61 4.29 3.99 7.90 7.90 7.90 5.39 7.90 7.90 7.90 5.68
48 0 0 2.91 4.92 4.92 4.92 3.21 4.76 4.92 4.92 3.57 3.41 6.92 6.92 6.92 4.29 6.74 6.92 6.92 4.70
5100 2.51 4.34 4.34 4.34 2.62 4.07 4.34 4.34 3.00 2.94 6.07 6.12 6.12 3.46 5.73 6.12 6.12 3.93
5400 2.19 3.86 3.87 3.87 2.15 3.50 3.87 3.87 2.55 2.56 5.31 5.45 5.45 2.82 4.90 5.45 5.45 3.33
5700 1.92 3.42 3.46 3.46 1.76 3.03 3.46 3.46 2.19 2.24 4.68 4.88 4.88 2.33 4.21 4.88 4.88 2.82
6000 1.69 3.05 3.12 3.12 1.47 2.62 3.12 3.12 1.88 1.98 4.15 4.40 4.40 1.95 3.64 4.40 4.40 2.42
6300 1.50 2.73 2.83 2.83 1.23 2.25 2.77 2.83 1.62 1.76 3.71 3.98 3.98 1.64 3.13 3.93 3.98 2.08
6600 1.33 2.46 2.57 2.57 1.04 1.94 2.46 2.57 1.41 1.58 3.33 3.62 3.62 1.39 2.66 3.48 3.62 1.81
6900 1.19 2.23 2.35 2.35 0.89 1.66 2.19 2.35 1.24 1.41 3.00 3.31 3.31 1.19 2.27 3.08 3.31 1.58
7200 1.07 2.03 2.15 2.16 0.76 1.44 1.96 2.16 1.09 1.28 2.72 3.04 3.04 1.03 1.95 2.75 3.04 1.39
7500 0.97 1.84 1.96 1.96 0.66 1.25 1.75 1.96 0.97 1.15 2.46 2.77 2.77 0.89 1.68 2.44 2.77 1.22
7800 0.87 1.67 1.80 1.80 0.57 1.09 1.56 1.77 0.86 1.05 2.23 2.53 2.53 0.78 1.46 2.17 2.51 1.09
8100 0.79 1.52 1.65 1.65 0.50 0.96 1.40 1.60 0.77 0.96 2.04 2.33 2.33 0.69 1.28 1.95 2.26 0.97
8400 0.72 1.40 1.52 1.52 0.44 0.84 1.25 1.45 0.69 0.87 1.86 2.14 2.14 0.61 1.12 1.74 2.04 0.87
8700 0.65 1.28 1.41 1.41 0.74 1.12 1.31 0.62 0.80 1.71 1.98 1.98 0.54 0.99 1.55 1.85 0.78
9000 0.60 1.18 1.31 1.31 0.65 1.00 1.20 0.56 0.73 1.58 1.84 1.84 0.48 0.87 1.38 1.68 0.70
9300 0.55 1.14 1.29 1.29 0.59 0.91 1.14 0.51 0.69 1.51 1.82 1.82 0.44 0.79 1.25 1.60 0.64
9600 0.51 1.06 1.21 1.21 0.52 0.82 1.05 0.47 0.63 1.40 1.70 1.71 0.71 1.12 1.46 0.59
9900 0.47 0.98 1.13 1.13 0.47 0.73 0.96 0.42 0.58 1.30 1.58 1.59 0.63 1.00 1.33 0.53
10200 0.43 0.91 1.05 1.06 0.42 0.66 0.87 0.39 0.54 1.20 1.47 1.49 0.57 0.90 1.22 0.49
10500 0.40 0.85 0.97 0.99 00.6 0.79 0.35 0.50 1.12 1.36 1.39 0.51 0.81 1.11 0.45
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
TL150.3
zeds & cees user's guide
46
Limit state capacity tables
Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap

Three lapped span: Z20)015 (kN/m 4 Three lapped span: Z20)015/2002 (kN/m
IN T OU Load for IN T OU Load for
deflection deflection
Bridging > 0 1, 2, 3 0 1 2 3 span/150 0 1, 2, 3 0 1 2 3 span/150
Span 3000 10.60 10.60 10.60 10.60 10.60 10.60 22.08 12.73 12.73 12.73 12.73 12.73 12.73 39.72
(mm) 3300 8.44 9.13 9.13 9.13 9.13 9.13 16.51 10.70 10.70 10.70 10.70 10.70 10.70 29.66
3600 6.77 7.95 7.95 7.95 7.95 7.95 12.66 8.67 9.12 9.12 9.12 9.12 9.12 22.72
3900 5.55 6.97 6.97 6.97 6.97 6.97 9.92 6.94 7.86 7.86 7.86 7.86 7.86 17.79
4200 4.62 6.15 6.15 6.15 6.15 6.15 7.91 5.68 6.84 6.84 6.84 6.84 6.84 14.18
4500 3.91 5.39 5.21 5.39 5.39 5.39 6.41 4.73 6.00 6.00 6.00 6.00 6.00 11.48
4800 3.34 4.73 4.27 4.73 4.73 4.73 5.26 4.00 5.30 5.30 5.30 5.30 5.30 9.43
5100 2.89 4.18 3.48 4.18 4.18 4.18 4.37 3.42 4.71 4.71 4.71 4.71 4.71 7.90
5400 2.52 3.72 2.87 3.72 3.72 3.72 3.67 2.96 4.21 4.21 4.21 4.21 4.21 6.71
5700 2.21 3.33 2.38 3.33 3.33 3.33 3.12 2.58 3.79 3.57 3.79 3.79 3.79 5.75
6000 1.96 3.00 2.00 3.00 3.00 3.00 2.70 2.27 3.37 3.00 3.37 3.37 3.37 4.97
6300 1.74 2.72 1.69 2.72 2.72 2.72 2.36 2.00 3.01 2.54 3.01 3.01 3.01 4.32
6600 1.55 2.47 1.39 2.46 2.47 2.47 2.08 1.78 2.70 2.17 2.70 2.70 2.70 3.76
6900 1.40 2.26 1.21 2.17 2.26 2.26 1.85 1.60 2.43 1.87 2.43 2.43 2.43 3.29
7200 1.21 2.07 1.05 1.91 2.07 2.07 1.65 1.44 2.21 1.62 2.21 2.21 2.21 2.90
7500 1.09 1.89 0.92 1.66 1.89 1.89 1.48 1.30 2.01 1.41 2.01 2.01 2.01 2.57
7800 0.99 1.73 0.81 1.45 1.73 1.73 1.33 1.17 1.84 1.24 1.84 1.84 1.84 2.29
8100 0.90 1.59 0.71 1.27 1.59 1.59 1.19 1.07 1.69 1.09 1.69 1.69 1.69 2.05
8400 0.83 1.46 0.63 1.12 1.46 1.46 1.07 0.97 1.55 0.97 1.55 1.55 1.55 1.85
8700 0.76 1.35 0.56 0.99 1.35 1.35 0.97 0.89 1.44 0.83 1.43 1.44 1.44 1.66
9000 0.69 1.26 0.49 0.88 1.26 1.26 0.88 0.82 1.33 0.74 1.29 1.33 1.33 1.50
9300 0.65 1.24 0.45 0.81 1.19 1.24 0.80 0.75 1.34 0.70 1.22 1.34 1.34 1.37
9600 0.60 1.17 0.40 0.72 1.09 1.17 0.73 0.69 1.24 0.63 1.10 1.24 1.24 1.25
9900 0.56 1.09 0.62 0.98 1.09 0.67 0.64 1.16 0.57 0.99 1.16 1.16 1.14
10200 0.52 1.02 0.56 0.88 1.02 0.61 0.59 1.08 0.52 0.89 1.08 1.08 1.04
10500 0.48 0.95 0.51 0.80 0.95 0.56 0.54 1.01 0.48 0.81 1.01 1.01 0.95
10800 0.44 0.89 0.47 0.72 0.89 0.52 0.51 0.95 0.44 0.74 0.95 0.95 0.87
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 0.41 0.84 0.43 0.66 0.84 0.48 0.47 0.89 0.40 0.67 0.89 0.89 0.80
11400 0.79 0 0.6 0.78 0.44 0.44 0.84 0.61 0.84 0.84 0.74
11700 0.74 5 0.5 0.72 0.41 0.41 0.79 0.56 0.79 0.79 0.69
12000 0.70 0 0.5 0.67 0.38 0.75 0.52 0.74 0.75 0.64
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
TL200.1
zeds & cees user's guide
47
Limit state capacity tables

Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap
Three lapped span: Z20)019 (kN/m 4 Three lapped span: Z20)02 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2, 3 0 1 2 3 span/150 0 1 2, 3 0 1 2 3 span/150
Span 3000 13.75 18.79 18.79 18.79 18.79 18.79 18.79 31.46 18.42 19.78 19.78 19.78 19.78 19.78 19.78 41.54
(mm) 3300 10.77 15.47 15.47 15.47 15.47 15.47 15.47 23.52 14.22 17.99 17.99 17.99 17.99 17.99 17.99 31.06
3600 8.66 12.95 12.95 12.95 12.95 12.95 12.95 18.04 11.13 16.50 16.50 16.50 16.50 16.50 16.50 23.82
3900 7.10 11.00 11.00 11.00 11.00 11.00 11.00 14.13 8.94 15.24 15.24 15.24 15.24 15.24 15.24 18.66
4200 5.93 9.45 9.45 9.18 9.45 9.45 9.45 11.27 7.32 13.74 13.74 12.55 13.74 13.74 13.74 14.88
4500 5.02 8.21 8.21 7.52 8.21 8.21 8.21 9.13 6.09 11.94 11.94 10.41 11.94 11.94 11.94 12.06
4800 4.29 7.20 7.20 6.07 7.20 7.20 7.20 7.50 5.15 10.47 10.47 8.58 10.47 10.47 10.47 9.90
5100 3.69 6.36 6.36 4.84 6.36 6.36 6.36 6.23 4.41 9.25 9.25 6.98 9.25 9.25 9.25 8.23
5400 3.21 5.66 5.66 4.04 5.66 5.66 5.66 5.24 3.81 8.23 8.23 5.75 8.23 8.23 8.23 6.93
5700 2.81 5.07 5.07 3.41 5.07 5.07 5.07 4.47 3.32 7.27 7.38 4.80 7.25 7.38 7.38 5.94
6000 2.48 4.57 4.57 2.90 4.57 4.57 4.57 3.85 2.92 6.46 6.64 4.02 6.35 6.64 6.64 5.13
6300 2.20 4.14 4.14 2.48 4.09 4.14 4.14 3.34 2.59 5.77 6.02 3.36 5.60 6.02 6.02 4.46
6600 1.97 3.77 3.77 2.10 3.59 3.77 3.77 2.91 2.31 5.18 5.47 2.84 4.95 5.47 5.47 3.91
6900 1.77 3.44 3.44 1.80 3.15 3.44 3.44 2.56 2.07 4.67 5.00 2.42 4.39 5.00 5.00 3.45
7200 1.59 3.16 3.16 1.55 2.74 3.16 3.16 2.26 1.86 4.24 4.59 2.07 3.88 4.59 4.59 3.04
7500 1.44 2.88 2.88 1.35 2.30 2.88 2.88 2.01 1.69 3.83 4.18 1.78 3.40 4.17 4.18 2.69
7800 1.31 2.63 2.63 1.17 2.03 2.63 2.63 1.79 1.53 3.47 3.83 1.55 2.97 3.75 3.83 2.40
8100 1.19 2.42 2.42 1.02 1.79 2.42 2.42 1.61 1.40 3.17 3.52 1.35 2.60 3.39 3.52 2.14
8400 1.09 2.22 2.23 0.89 1.59 2.23 2.23 1.45 1.28 2.90 3.24 1.18 2.30 3.07 3.24 1.93
8700 1.00 2.03 2.06 0.78 1.42 2.03 2.06 1.31 1.17 2.66 3.00 1.04 2.04 2.78 3.00 1.74
9000 0.92 1.87 1.91 0.69 1.27 1.84 1.91 1.19 1.08 2.45 2.78 0.92 1.81 2.54 2.78 1.58
9300 0.86 1.79 1.89 0.62 1.18 1.74 1.89 1.09 1.00 2.35 2.75 0.84 1.66 2.42 2.73 1.44
9600 0.79 1.66 1.78 0.56 1.07 1.56 1.78 1.00 0.93 2.17 2.58 0.75 1.47 2.21 2.52 1.32
9900 0.73 1.54 1.66 0.50 0.96 1.41 1.66 0.91 0.86 2.01 2.41 0.67 1.32 2.00 2.32 1.20
10200 0.68 1.43 1.55 0.45 0.86 1.23 1.55 0.84 0.80 1.86 2.25 0.60 1.18 1.82 2.14 1.10
10500 0.63 1.33 1.45 0.40 0.78 1.12 1.44 0.77 0.74 1.73 2.10 0.54 1.06 1.64 1.97 1.00
10800 0.58 1.24 1.36 0.70 1.02 1.33 0.71 0.69 1.61 1.96 0.49 0.95 1.49 1.82 0.92
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 0.54 1.15 1.28 0.64 0.93 1.23 0.66 0.65 1.50 1.84 0.45 0.86 1.36 1.69 0.85
11400 0.50 1.08 1.21 0.58 0.86 1.13 0.61 0.60 1.40 1.72 0.41 0.78 1.24 1.57 0.78
11700 0.47 1.00 1.14 0.53 0.79 1.05 0.56 0.56 1.31 1.62 0.71 1.13 1.46 0.72
12000 0.44 0.94 1.08 0.48 0.73 0.96 0.52 0.53 1.23 1.52 0.65 1.04 1.36 0.67
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
TL200.2
zeds & cees user's guide

48
48
Limit state capacity tables

Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap
Three lapped span: Z25)019 (kN/m
IN T OU Load for
deflection
Bridging > 0 1 2, 3 0 1 2 3 span/150
Span 3000 17.28 17.28 17.28 17.28 17.28 17.28 17.28 51.10
(mm) 3300 13.93 15.00 15.00 15.00 15.00 15.00 15.00 38.21
3600 11.15 13.16 13.16 13.16 13.16 13.16 13.16 29.30
3900 9.12 11.64 11.64 11.64 11.64 11.64 11.64 22.95
4200 7.59 10.36 10.36 10.36 10.36 10.36 10.36 18.30
4500 6.38 9.28 9.28 9.28 9.28 9.28 9.28 14.83
4800 5.42 8.35 8.35 7.80 8.35 8.35 8.35 12.18
5100 4.65 7.55 7.55 6.42 7.55 7.55 7.55 10.12
5400 4.04 6.85 6.85 5.34 6.85 6.85 6.85 8.50
5700 3.53 6.24 6.24 4.49 6.24 6.24 6.24 7.21
6000 3.12 5.70 5.70 3.80 5.70 5.70 5.70 6.17
6300 2.77 5.23 5.23 3.23 5.23 5.23 5.23 5.32
6600 2.47 4.78 4.78 2.73 4.78 4.78 4.78 4.61
6900 2.22 4.37 4.37 2.33 4.19 4.37 4.37 4.04
7200 2.00 4.01 4.01 2.01 3.63 4.01 4.01 3.60
7500 1.81 3.65 3.65 1.74 3.06 3.65 3.65 3.23
7800 1.64 3.34 3.34 1.51 2.69 3.34 3.34 2.91
8100 1.49 3.07 3.07 1.31 2.37 3.07 3.07 2.63
8400 1.37 2.83 2.83 1.14 2.10 2 .83 2.83 2.38
8700 1.25 2.62 2.62 1.00 1.87 2.62 2.62 2.15
9000 1.15 2.43 2.43 0.88 1.67 2.43 2.43 1.95
9300 1.07 2.37 2.40 0.80 1.55 2.31 2.40 1.78
9600 0.99 2.19 2.25 0.71 1.40 2.07 2.25 1.63
9900 0.91 2.02 2.10 0.63 1.25 1.80 2.10 1.49
10200 0.84 1.87 1.96 0.56 1.12 1.63 1.96 1.36
10500 0.78 1.73 1.84 0.51 1.00 1.48 1.84 1.26
10800 0.73 1.61 1.73 0.46 0.91 1.35 1.73 1.16
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 0.67 1.50 1.62 0.41 0.82 1.24 1.62 1.07


11400 0.63 1.40 1.53 5 0.7 1.13 1.52 0.99
11700 0.58 1.31 1.44 8 0.6 1.04 1.39 0.92
12000 0.54 1.22 1.37 2 0.6 0.95 1.28 0.86
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
TL250.1
zeds & cees user's guide

49
49
Limit state capacity tables

Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap

Three lapped span: Z25)019/25024 (kN/m 4 Three lapped span: Z25)02 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2,3 0 1 2 3 span/150 0 1 2,3 0 1 2 3 span/150
Span 3000 19.82 19.82 19.82 19.82 19.82 19.82 19.82 68.59 19.78 19.78 19.78 19.78 19.78 19.78 19.78 70.48
(mm) 3300 17.09 17.88 17.88 17.88 17.88 17.88 17.88 51.26 17.87 17.99 17.99 17.99 17.99 17.99 17.99 52.70
3600 13.10 15.36 15.36 15.36 15.36 15.36 15.36 39.29 13.95 16.50 16.50 16.50 16.50 16.50 16.50 40.41
3900 10.46 13.34 13.34 13.34 13.34 13.34 13.34 30.77 11.16 15.24 15.24 15.24 15.24 15.24 15.24 31.65
4200 8.53 11.69 11.69 11.69 11.69 11.69 11.69 24.54 9.12 14.16 14.16 14.16 14.16 14.16 14.16 25.24
4500 7.08 10.33 10.33 10.33 10.33 10.33 10.33 19.88 7.58 13.22 13.22 13.22 13.22 13.22 13.22 20.45
4800 5.97 9.18 9.18 9.18 9.18 9.18 9.18 16.32 6.40 12.40 12.40 11.27 12.40 12.40 12.40 16.80
5100 5.10 8.21 8.21 7.83 8.21 8.21 8.21 13.57 5.46 11.68 11.68 9.13 11.68 11.68 11.68 13.96
5400 4.40 7.39 7.39 6.47 7.39 7.39 7.39 11.40 4.72 10.55 10.55 7.50 10.55 10.55 10.55 11.73
5700 3.83 6.67 6.67 5.40 6.67 6.67 6.67 9.66 4.11 9.45 9.45 6.24 9.45 9.45 9.45 9.95
6000 3.36 6.06 6.06 4.56 6.06 6.06 6.06 8.27 3.61 8.52 8.52 5.20 8.52 8.52 8.52 8.51
6300 2.98 5.52 5.52 3.88 5.52 5.52 5.52 7.15 3.20 7.67 7.71 4.35 7.48 7.71 7.71 7.33
6600 2.65 5.04 5.04 3.32 5.04 5.04 5.04 6.25 2.85 6.87 7.02 3.66 6.59 7.02 7.02 6.38
6900 2.37 4.56 4.56 2.87 4.56 4.56 4.56 5.50 2.55 6.19 6.41 3.11 5.82 6.41 6.41 5.61
7200 2.13 4.14 4.14 2.47 4.14 4.14 4.14 4.87 2.29 5.60 5.88 2.65 5.10 5.88 5.88 4.97
7500 1.93 3.77 3.77 2.13 3.75 3.77 3.77 4.33 2.07 5.06 5.36 2.28 4.44 5.36 5.36 4.42
7800 1.75 3.45 3.45 1.86 3.30 3.45 3.45 3.87 1.88 4.58 4.91 1.97 3.87 4.91 4.91 3.95
8100 1.59 3.17 3.17 1.63 2.90 3.17 3.17 3.47 1.71 4.17 4.51 1.72 3.39 4.51 4.51 3.55
8400 1.46 2.92 2.92 1.43 2.48 2.92 2.92 3.12 1.57 3.81 4.15 1.50 2.98 4.10 4.15 3.20
8700 1.33 2.70 2.70 1.27 2.22 2.70 2.70 2.81 1.44 3.49 3.84 1.32 2.64 3.72 3.84 2.89
9000 1.23 2.50 2.50 1.13 1.98 2.50 2.50 2.54 1.32 3.20 3.56 1.17 2.35 3.38 3.56 2.61
9300 1.15 2.50 2.50 1.02 1.85 2.50 2.50 2.32 1.23 3.04 3.53 1.05 2.14 3.21 3.53 2.39
9600 1.06 2.33 2.33 0.91 1.66 2.33 2.33 2.12 1.13 2.81 3.31 0.94 1.90 2.91 3.31 2.18
9900 0.98 2.16 2.17 0.81 1.50 2.17 2.17 1.93 1.05 2.59 3.08 0.84 1.69 2.63 3.08 1.99
10200 0.91 2.01 2.03 0.73 1.36 2.02 2.03 1.77 0.97 2.39 2.88 0.75 1.51 2.37 2.86 1.82
10500 0.84 1.87 1.90 0.66 1.24 1.84 1.90 1.63 0.91 2.21 2.70 0.68 1.36 2.14 2.64 1.67
10800 0.78 1.74 1.78 0.59 1.13 1.67 1.78 1.50 0.84 2.05 2.53 0.61 1.22 1.94 2.44 1.54
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 0.73 1.62 1.68 0.54 1.02 1.52 1.68 1.39 0.79 1.91 2.38 0.55 1.10 1.76 2.25 1.42
11400 0.68 1.51 1.58 0.49 0.93 1.34 1.58 1.28 0.73 1.78 2.25 0.50 1.00 1.61 2.09 1.31
11700 0.63 1.41 1.49 0.45 0.85 1.23 1.49 1.19 0.69 1.66 2.12 0.46 0.90 1.47 1.94 1.21
12000 0.59 1.32 1.41 0.41 0.77 1.14 1.41 1.10 0.64 1.56 2.00 0.42 0.82 1.34 1.79 1.13
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
TL250.2
zeds & cees user's guide

50
50
Limit state capacity tables

Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap

Three lapped span: Z30)024 (kN/m 0 Three lapped span: Z30)024/3003 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2 3 0 1 2 3 span/150 0 1 2, 3 0 1 2 3 span/150
Span 6000 5.36 10.31 10.31 10.31 10.12 10.31 10.31 10.31 14.12 5.96 11.20 11.20 11.20 11.20 11.20 11.20 18.35
(mm) 6300 4.70 9.50 9.50 9.50 8.59 9.50 9.50 9.50 12.17 5.20 10.24 10.24 10.24 10.24 10.24 10.24 15.81
6600 4.15 8.77 8.77 8.77 7.29 8.77 8.77 8.77 10.56 4.58 9.40 9.40 8.82 9.40 9.40 9.40 13.73
6900 3.69 8.12 8.12 8.12 6.35 8.12 8.12 8.12 9.22 4.06 8.65 8.65 7.58 8.65 8.65 8.65 11.99
7200 3.30 7.54 7.54 7.54 5.57 7.54 7.54 7.54 8.10 3.62 7.99 7.99 6.47 7.99 7.99 7.99 10.53
7500 2.97 7.01 7.01 7.01 4.88 7.01 7.01 7.01 7.16 3.25 7.40 7.40 5.68 7.40 7.40 7.40 9.38
7800 2.68 6.53 6.53 6.53 4.25 6.53 6.53 6.53 6.35 2.93 6.87 6.87 5.01 6.87 6.87 6.87 8.39
8100 2.43 6.10 6.10 6.10 3.73 6.10 6.10 6.10 5.73 2.66 6.38 6.38 4.45 6.38 6.38 6.38 7.55
8400 2.21 5.66 5.71 5.71 3.28 5.62 5.71 5.71 5.20 2.42 5.88 5.88 3.97 5.88 5.88 5.88 6.81
8700 2.03 5.16 5.28 5.28 2.88 5.06 5.28 5.28 4.73 2.21 5.44 5.44 3.53 5.44 5.44 5.44 6.17
9000 1.86 4.73 4.89 4.89 2.53 4.57 4.89 4.89 4.31 2.02 5.04 5.04 3.14 5.04 5.04 5.04 5.61
9300 1.72 4.51 4.85 4.85 2.29 4.22 4.85 4.85 3.95 1.88 4.89 5.04 2.89 4.94 5.04 5.04 5.15
9600 1.59 4.14 4.54 4.54 2.04 3.79 4.54 4.54 3.60 1.73 4.50 4.69 2.57 4.49 4.69 4.69 4.70
9900 1.47 3.80 4.24 4.24 1.81 3.35 4.24 4.24 3.29 1.60 4.15 4.37 2.29 4.09 4.37 4.37 4.30
10200 1.37 3.50 3.96 3.96 1.62 3.04 3.96 3.96 3.02 1.49 3.84 4.08 2.06 3.70 4.08 4.08 3.94
10500 1.27 3.24 3.71 3.71 1.46 2.77 3.71 3.71 2.77 1.38 3.55 3.82 1.85 3.35 3.82 3.82 3.62
10800 1.19 3.00 3.48 3.48 1.31 2.53 3.48 3.48 2.55 1.29 3.28 3.59 1.67 3.05 3.59 3.59 3.34
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 1.11 2.78 3.27 3.27 1.18 2.32 3.27 3.27 2.36 1.20 3.05 3.38 1.51 2.77 3.38 3.38 3.08
11400 1.04 2.59 3.09 3.09 1.07 2.13 3.04 3.09 2.18 1.13 2.83 3.18 1.37 2.49 3.18 3.18 2.84
11700 0.97 2.42 2.91 2.91 0.97 1.96 2.81 2.91 2.02 1.05 2.64 3.00 1.24 2.30 3.00 3.00 2.63
12000 0.91 2.26 2.75 2.75 0.88 1.80 2.61 2.75 1.88 0.99 2.47 2.84 1.14 2.12 2.84 2.84 2.43
12300 0.87 2.14 2.78 2.78 0.83 1.71 2.49 2.78 1.77 0.94 2.37 3.00 1.07 2.08 2.96 3.00 2.30
12600 0.82 2.02 2.65 2.65 0.76 1.57 2.30 2.65 1.65 0.89 2.22 2.84 0.98 1.93 2.75 2.84 2.13
12900 0.77 1.90 2.52 2.52 0.70 1.44 2.12 2.52 1.55 0.84 2.08 2.69 0.90 1.79 2.56 2.69 1.99
13200 0.73 1.80 2.41 2.41 0.64 1.32 1.97 2.41 1.45 0.79 1.96 2.55 0.83 1.65 2.39 2.55 1.85
13500 0.69 1.70 2.30 2.30 0.59 1.21 1.80 2.30 1.36 0.75 1.85 2.42 0.76 1.52 2.22 2.42 1.73
13800 0.65 1.61 2.20 2.20 0.54 1.12 1.68 2.17 1.28 0.71 1.75 2.30 0.70 1.41 2.06 2.30 1.62
14100 0.62 1.53 2.11 2.11 0.50 1.03 1.57 2.04 1.20 0.67 1.65 2.19 0.65 1.31 1.91 2.19 1.52
14400 0.58 1.45 2.02 2.02 0.46 0.95 1.47 1.92 1.14 0.64 1.56 2.08 0.60 1.22 1.78 2.08 1.42
14700 0.56 1.38 1.93 1.93 0.43 0.88 1.37 1.81 1.07 0.60 1.48 1.99 0.56 1.13 1.66 1.99 1.34
15000 0.53 1.31 1.84 1.84 0.40 0.81 1.29 1.69 1.01 0.57 1.41 1.90 0.52 1.04 1.55 1.90 1.26
15300 0.50 1.24 1.76 1.76 0.75 1.21 1.58 0.95 0.55 1.34 1.82 0.49 0.97 1.42 1.82 1.18
15600 0.48 1.18 1.67 1.68 0.70 1.13 1.48 0.90 0.52 1.27 1.74 0.45 0.90 1.34 1.72 1.12
15900 0.45 1.13 1.59 1.61 0.65 1.06 1.38 0.85 0.50 1.21 1.66 0.42 0.84 1.26 1.63 1.05
16200 0.43 1.07 1.52 1.55 0.61 1.00 1.30 0.81 0.47 1.16 1.60 0.40 0.78 1.19 1.54 1.00
16500 0.41 1.03 1.45 1.49 0.57 0.93 1.22 0.76 0.45 1.10 1.53 0.73 1.12 1.46 0.94
16800 0.98 1.39 1.43 0.53 0.88 1.13 0.73 0.43 1.05 1.47 0.68 1.06 1.38 0.89
17100 0.94 1.33 1.37 0.49 0.82 1.06 0.69 0.41 1.01 1.41 0.64 1.00 1.30 0.85
zeds & cees user's guide

17400 0.90 1.27 1.32 0.46 0.78 1.01 0.65 0.96 1.36 0.60 0.94 1.23 0.80
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for cap acity tables. In mixed spans, the thicker section is used in the end spans.
TL300.1

51
51
Limit state capacity tables

Three lapped spans

Three lapped spans


Lap
End span End span

Span (mm) Span (mm) Span (mm)

Overall purlin length =


span + 70 mm + (Lap/2)
Overall purlin length =
span + 70 mm + Lap

Three lapped span: Z30)030 (kN/m 0 Three lapped span: Z35)03 (kN/m
IN T OU Load for IN T OU Load for
deflect'n deflect'n
Bridging > 0 1 2 3 0 1 2 3 span/150 0 1 2 3 0 1 2 3 span/150
Span 6000 6.31 16.68 16.68 16.68 14.28 16.68 16.68 16.68 18.83 9.78 17.56 17.56 17.56 17.56 17.56 17.56 17.56 29.23
(mm) 6300 5.51 15.10 15.10 15.10 12.15 15.10 15.10 15.10 16.23 8.46 16.20 16.20 16.20 16.20 16.20 16.20 16.20 25.20
6600 4.85 13.69 13.74 13.74 10.39 13.74 13.74 13.74 14.09 7.36 14.99 14.99 14.99 14.99 14.99 14.99 14.99 21.87
6900 4.30 12.31 12.55 12.55 8.83 12.55 12.55 12.55 12.30 6.45 13.90 13.90 13.90 13.90 13.90 13.90 13.90 19.10
7200 3.83 11.12 11.51 11.51 7.56 11.51 11.51 11.51 10.81 5.69 12.92 12.92 12.92 12.89 12.92 12.92 12.92 16.78
7500 3.44 10.01 10.49 10.49 6.50 10.47 10.49 10.49 9.55 5.05 12.03 12.03 12.03 11.23 12.03 12.03 12.03 14.82
7800 3.10 9.05 9.60 9.60 5.62 9.41 9.60 9.60 8.53 4.51 11.23 11.23 11.23 9.82 11.23 11.23 11.23 13.15
8100 2.81 8.21 8.82 8.82 4.89 8.49 8.82 8.82 7.66 4.06 10.50 10.50 10.50 8.64 10.50 10.50 10.50 11.73
8400 2.55 7.48 8.13 8.13 4.27 7.68 8.13 8.13 6.92 3.66 9.83 9.83 9.83 7.62 9.83 9.83 9.83 10.50
8700 2.33 6.84 7.52 7.52 3.75 6.97 7.52 7.52 6.27 3.32 9.21 9.21 9.21 6.76 9.21 9.21 9.21 9.44
9000 2.14 6.28 6.98 6.98 3.31 6.34 6.98 6.98 5.70 3.02 8.54 8.54 8.54 5.89 8.54 8.54 8.54 8.51
9300 1.98 5.97 6.91 6.91 3.00 6.00 6.91 6.91 5.23 2.78 8.27 8.46 8.46 5.50 8.46 8.46 8.46 7.80
9600 1.83 5.47 6.48 6.48 2.67 5.40 6.48 6.48 4.79 2.55 7.62 7.93 7.93 4.98 7.93 7.93 7.93 7.15
9900 1.69 5.02 6.04 6.04 2.38 4.87 6.04 6.04 4.40 2.35 7.00 7.39 7.39 4.51 7.39 7.39 7.39 6.60
10200 1.57 4.61 5.64 5.64 2.13 4.40 5.63 5.64 4.03 2.17 6.45 6.91 6.91 4.09 6.91 6.91 6.91 6.08
10500 1.46 4.26 5.29 5.29 1.91 3.97 5.20 5.29 3.70 2.01 5.92 6.47 6.47 3.72 6.39 6.47 6.47 5.59
10800 1.36 3.94 4.96 4.96 1.73 3.58 4.82 4.96 3.41 1.86 5.46 6.08 6.08 3.36 5.88 6.08 6.08 5.15
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 1.27 3.66 4.67 4.67 1.56 3.23 4.47 4.67 3.15 1.74 5.04 5.71 5.71 3.05 5.42 5.71 5.71 4.76
11400 1.19 3.40 4.40 4.40 1.41 2.93 4.16 4.40 2.92 1.62 4.66 5.38 5.38 2.78 4.98 5.38 5.38 4.41
11700 1.12 3.16 4.15 4.15 1.29 2.66 3.87 4.15 2.70 1.51 4.33 5.08 5.08 2.53 4.57 5.08 5.08 4.09
12000 1.05 2.94 3.92 3.92 1.17 2.42 3.61 3.92 2.50 1.42 4.02 4.80 4.80 2.32 4.19 4.80 4.80 3.80
12300 1.00 2.80 3.88 3.97 1.10 2.27 3.52 3.97 2.36 1.34 3.86 4.85 4.85 2.20 4.00 4.85 4.85 3.58
12600 0.94 2.62 3.67 3.78 1.01 2.08 3.28 3.76 2.19 1.26 3.61 4.62 4.62 2.01 3.69 4.62 4.62 3.33
12900 0.89 2.45 3.47 3.60 0.93 1.90 3.03 3.54 2.04 1.19 3.38 4.41 4.41 1.84 3.41 4.41 4.41 3.11
13200 0.84 2.30 3.29 3.44 0.85 1.75 2.81 3.33 1.91 1.12 3.17 4.20 4.20 1.68 3.15 4.20 4.20 2.91
13500 0.80 2.16 3.12 3.28 0.78 1.61 2.61 3.15 1.78 1.06 2.97 4.02 4.02 1.55 2.92 4.02 4.02 2.73
13800 0.76 2.04 2.96 3.14 0.72 1.48 2.43 2.97 1.66 1.00 2.80 3.84 3.84 1.43 2.65 3.84 3.84 2.56
14100 0. 72 1.92 2.81 3.00 0.67 1.36 2.25 2.81 1.56 0.95 2.57 3.68 3.68 1.32 2.48 3.63 3.68 2.40
14400 0.68 1.81 2.68 2.88 0.62 1.26 2.08 2.66 1.46 0.90 2.44 3.52 3.52 1.22 2.32 3.42 3.52 2.26
14700 0.65 1.71 2.54 2.75 0.58 1.17 1.93 2.50 1.37 0.86 2.30 3.36 3.36 1.13 2.17 3.21 3.36 2.13
15000 0.62 1.62 2.42 2.62 0.54 1.08 1.79 2.37 1.29 0.82 2.18 3.21 3.21 1.04 2.03 3.02 3.21 2.01
15300 0. 59 1.53 2.30 2.51 0.50 1.00 1.66 2.23 1.22 0.78 2.07 3.07 3.07 0.97 1.90 2.84 3.07 1.90
15600 0.56 1.46 2.19 2.39 0.47 0.93 1.55 2.10 1.15 0.74 1.96 2.94 2.94 0.90 1.79 2.66 2.94 1.79
15900 0.53 1.38 2.09 2.28 0.44 0.87 1.44 1.97 1.08 0.71 1.87 2.82 2.82 0.84 1.68 2.49 2.82 1.69
16200 0.51 1.31 1.99 2.17 0.41 0.81 1.34 1.85 1.02 0.67 1.78 2.70 2.70 0.78 1.58 2.34 2.70 1.61
16500 0.49 1.25 1.90 2.08 0.76 1.25 1.74 0.97 0.64 1.69 2.57 2.59 0.73 1.49 2.20 2.59 1.53
16800 0.47 1.19 1.82 1.99 0.71 1.17 1.64 0.92 0.62 1.61 2.45 2.49 0.69 1.39 2.07 2.49 1.45
zeds & cees user's guide

17100 0.45 1.13 1.74 1.90 0.66 1.10 1.54 0.87 0.59 1.54 2.34 2.39 0.64 1.31 1.95 2.39 1.38
17400 0.43 1.08 1.66 1.82 0.62 1.03 1.46 0.82 0.57 1.47 2.23 2.30 0.60 1.23 1.83 2.30 1.31
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables.
TL300/350
52
Limit state capacity tables
Four continuous spans

Four spans

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = 4 x span + 70 mm

zeds & cees user's guide


53
Limit state capacity tables

Four lapped spans


Four lapped spans Lap
End span End span

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = Overall purlin length =


span + 70 mm + (Lap/2) span + 70 mm + (Lap/2)
zeds & cees user's guide
54
Limit state capacity tables

Four lapped spans

Four lapped spans Lap


End span End span

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = Overall purlin length =


span + 70 mm + (Lap/2) span + 70 mm + (Lap/2)

zeds & cees user's guide


55
Limit state capacity tables

Four lapped spans

Four lapped spans Lap


End span End span

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = Overall purlin length =


span + 70 mm + (Lap/2) span + 70 mm + (Lap/2)

Four lapped span: Z15015)/15024 (kN/m Four lapped span: Z150)19 (kN/m Four lapped4span: Z150)2 (kN/m
IN O UT Load IN OU
T Load IN OU
T Load
for for for
defl'n defl'n defl'n
Bridging > 0 1 2, 3 0 1 2 3 span/150 0 1 2 3 0 1 2 3 span/150 0 1 2 3 0 1 2 3 span/150
Span 3000 9.17 12.11 12.11 12.11 12.11 12.11 12.11 20.75 9.42 13.64 13.64 13.64 13.56 13.64 13.64 13.64 16.29 11.57 18.71 18.71 18.71 18.71 18.71 18.71 18.71 21.73
(mm) 3300 7.02 9.79 9.79 9.79 9.79 9.79 9.79 15.44 7.39 11.21 11.21 11.21 10.61 11.21 11.21 11.21 12.14 8.97 15.79 15.79 15.79 14.89 15.79 15.79 15.79 16.20
3600 5.55 8.05 8.05 8.05 8.05 8.05 8.05 11.79 5.95 9.37 9.37 9.37 8.43 9.37 9.37 9.37 9.29 7.15 13.20 13.20 13.20 11.71 13.20 13.20 13.20 12.38
3900 4.49 6.59 6.59 6.59 6.59 6.59 6.59 9.20 4.89 7.94 7.94 7.94 6.77 7.94 7.94 7.94 7.25 5.82 11.19 11.19 11.19 9.33 11.19 11.19 11.19 9.67
4200 3.71 5.43 5.43 5.28 5.43 5.43 5.43 7.32 4.09 6.82 6.82 6.82 5.39 6.82 6.82 6.82 5.77 4.83 9.61 9.61 9.61 7.38 9.61 9.61 9.61 7.70
4500 3.11 4.56 4.56 4.28 4.56 4.56 4.56 5.93 3.47 5.92 5.92 5.92 4.29 5.92 5.92 5.92 4.67 4.06 8.34 8.34 8.34 5.78 8.34 8.34 8.34 6.22
4800 2.64 3.88 3.88 3.51 3.88 3.88 3.88 4.88 2.96 5.16 5.16 5.16 3.43 5.02 5.16 5.16 3.82 3.46 7.27 7.27 7.27 4.59 7.13 7.27 7.27 5.10
5100 2.27 3.34 3.34 2.88 3.34 3.34 3.34 4.07 2.54 4.45 4.45 4.45 2.78 4.22 4.45 4.45 3.20 2.98 6.23 6.27 6.27 3.69 5.96 6.27 6.27 4.25
5400 1.97 2.91 2.91 2.38 2.91 2.91 2.91 3.43 2.21 3.88 3.88 3.88 2.29 3.59 3.88 3.88 2.71 2.59 5.37 5.47 5.47 3.01 5.04 5.47 5.47 3.58
5700 1.72 2.56 2.56 1.94 2.56 2.56 2.56 2.93 1.93 3.40 3.41 3.41 1.88 3.07 3.41 3.41 2.32 2.26 4.68 4.81 4.81 2.48 4.29 4.81 4.81 3.05
6000 1.51 2.27 2.27 1.65 2.27 2.27 2.27 2.50 1.70 2.99 3.03 3.03 1.56 2.64 3.03 3.03 2.01 2.00 4.11 4.26 4.26 2.07 3.68 4.26 4.26 2.63
6300 1.34 2.02 2.02 1.42 2.02 2.02 2.02 2.16 1.51 2.65 2.70 2.70 1.31 2.29 2.70 2.70 1.74 1.77 3.63 3.80 3.80 1.74 3.18 3.80 3.80 2.28
6600 1.20 1.82 1.82 1.23 1.82 1.82 1.82 1.87 1.34 2.37 2.43 2.43 1.10 1.97 2.39 2.43 1.53 1.58 3.23 3.42 3.42 1.48 2.75 3.40 3.42 1.97
6900 1.07 1.64 1.64 1.07 1.64 1.64 1.64 1.63 1.20 2.12 2.19 2.19 0.94 1.71 2.11 2.19 1.34 1.42 2.89 3.09 3.09 1.26 2.37 3.00 3.09 1.72
7200 0.96 1.49 1.49 0.94 1.45 1.49 1.49 1.43 1.08 1.92 1.99 1.99 0.81 1.48 1.88 1.99 1.18 1.28 2.60 2.80 2.80 1.09 2.03 2.66 2.80 1.51
7500 0.87 1.36 1.36 0.83 1.29 1.36 1.36 1.26 0.98 1.74 1.81 1.81 0.70 1.28 1.68 1.81 1.04 1.16 2.35 2.55 2.55 0.95 1.76 2.37 2.55 1.33
7800 0.79 1.24 1.24 0.74 1.15 1.24 1.24 1.12 0.88 1.58 1.66 1.66 0.61 1.12 1.51 1.66 0.93 1.05 2.14 2.34 2.34 0.83 1.53 2.11 2.34 1.18
8100 0.72 1.14 1.14 0.66 1.03 1.14 1.14 1.00 0.80 1.44 1.52 1.52 0.53 0.98 1.36 1.52 0.83 0.96 1.95 2.15 2.15 0.73 1.33 1.90 2.15 1.05
8400 0.65 1.05 1.05 0.58 0.91 1.05 1.05 0.89 0.73 1.32 1.41 1.41 0.47 0.87 1.22 1.38 0.74 0.88 1.78 1.98 1.98 0.64 1.17 1.71 1.97 0.94
8700 0.60 0.97 0.97 0.52 0.82 0.97 0.97 0.80 0.67 1.21 1.30 1.30 0.41 0.77 1.11 1.26 0.67 0.81 1.63 1.83 1.83 0.57 1.03 1.54 1.79 0.85
9000 0.55 0.90 0.90 0.47 0.73 0.90 0.90 0.72 0.61 1.12 1.21 1.21 0.68 0.99 1.15 0.61 0.74 1.50 1.70 1 .70 0.51 0.92 1.39 1.63 0.76
9300 0.52 0.90 0.90 0.44 0.67 0.90 0.90 0.67 0.57 1.08 1.18 1.20 0.62 0.93 1.11 0.56 0.70 1.45 1.64 1.69 0.47 0.83 1.29 1.56 0.70
9600 0.48 0.84 0.84 0.60 0.82 0.84 0.61 0.53 1.00 1.09 1.12 0.55 0.83 1.01 0.51 0.64 1.34 1.51 1.58 0.42 0.74 1.15 1.42 0.64
9900 0.44 0.78 0.78 0.55 0.75 0.78 0.55 0.48 0.93 1.01 1.04 0.49 0.75 0.93 0.46 0.60 1.24 1.40 1.47 0.67 1.03 1.30 0.58
10200 0.40 0.73 0.73 0.50 0.69 0.73 0.50 0.45 0.86 0.94 0.98 0.44 0.67 0.85 0.42 0.55 1.15 1.30 1.37 0.60 0.92 1.19 0.53
10500 0.68 0.68 0.46 0.63 0.68 0.46 0.41 0.80 0.87 0.91 0.40 0.61 0.78 0.39 0.51 1.07 1.20 1.29 0.54 0.83 1.09 0.48
10800 0.64 0.64 0.42 0.58 0.64 0.42 0.75 0.81 0.86 0.55 0.72 0.35 0.48 1.00 1.12 1.21 0.49 0.75 1.01 0.44
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 0.60 0.60 0.54 0.60 0.39 0.70 0.76 0.81 0.50 0.66 0.33 0.45 0.93 1.04 1.14 0.44 0.68 0.92 0.41
11400 0.56 0.57 0.49 0.57 0.36 0.65 0.71 0.76 0.46 0.61 0.30 0.42 0.87 0.97 1.07 0.40 0.62 0.85 0.38
11700 0.53 0.54 0.45 0.54 0.33 0.61 0.66 0.72 0.42 0.56 0.28 0.81 0.91 1.01 0.57 0.78 0.35
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
FL150.2
zeds & cees user's guide
56
Limit state capacity tables
Four lapped spans

Four lapped spans Lap


End span End span

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = Overall purlin length =


span + 70 mm + (Lap/2) span + 70 mm + (Lap/2)

Four lapped span: Z200)15 (kN/m 4 Four lapped span: Z200)15/2002 (kN/m
IN T OU Load for IN T OU Load for
deflection deflection
Bridging > 0 1, 2, 3 0 1 2 3 span/150 0 1, 2, 3 0 1 2, 3 span/150
Span 3000 10.05 10.05 10.05 10.05 10.05 10.05 24.69 11.35 11.35 11.35 11.35 11.35 44.18
(mm) 3300 8.62 8.62 8.62 8.62 8.62 8.62 18.40 9.60 9.60 9.60 9.60 9.60 32.87
3600 6.93 7.47 7.47 7.47 7.47 7.47 14.07 8.16 8.22 8.22 8.22 8.22 25.09
3900 5.67 6.53 6.53 6.53 6.53 6.53 10.99 6.55 7.11 7.11 7.11 7.11 19.58
4200 4.72 5.74 5.74 5.74 5.74 5.74 8.75 5.37 6.20 6.20 6.20 6.20 15.57
4500 3.98 5.08 5.08 5.08 5.08 5.08 7.07 4.47 5.45 5.45 5.45 5.45 12.57
4800 3.40 4.53 4.53 4.53 4.53 4.53 5.79 3.78 4.82 4.82 4.82 4.82 10.30
5100 2.92 4.05 3.69 4.05 4.05 4.05 4.81 3.24 4.30 4.30 4.30 4.30 8.54
5400 2.53 3.64 3.02 3.64 3.64 3.64 4.03 2.80 3.85 3.85 3.85 3.85 7.16
5700 2.21 3.28 2.50 3.28 3.28 3.28 3.42 2.44 3.46 3.46 3.46 3.46 6.07
6000 1.95 2.91 2.09 2.91 2.91 2.91 2.92 2.15 3.08 2.99 3.08 3.08 5.24
6300 1.73 2.60 1.76 2.60 2.60 2.60 2.51 1.90 2.75 2.58 2.75 2.75 4.55
6600 1.54 2.33 1.50 2.33 2.33 2.33 2.18 1.69 2.47 2.21 2.47 2.47 3.98
6900 1.38 2.11 1.28 2.11 2.11 2.11 1.91 1.52 2.23 1.91 2.23 2.23 3.50
7200 1.24 1.91 1.07 1.89 1.91 1.91 1.70 1.36 2.02 1.65 2.02 2.02 3.10
7500 1.13 1.74 0.93 1.67 1.74 1.74 1.53 1.23 1.84 1.44 1.84 1.84 2.75
7800 1.02 1.60 0.82 1.48 1.60 1.60 1.37 1.12 1.69 1.27 1.69 1.69 2.44
8100 0.93 1.47 0.72 1.30 1.47 1.47 1.24 1.02 1.55 1.12 1.55 1.55 2.18
8400 0.85 1.35 0.64 1.14 1.35 1.35 1.12 0.93 1.43 0.99 1.43 1.43 1.96
8700 0.78 1.25 0.57 1.01 1.25 1.25 1.02 0.85 1.32 0.88 1.32 1.32 1.76
9000 0.71 1.16 0.51 0.90 1.16 1.16 0.93 0.78 1.22 0.79 1.22 1.22 1.60
9300 0.65 1.16 0.47 0.83 1.16 1.16 0.86 0.71 1.22 0.70 1.21 1.22 1.47
9600 0.60 1.08 0.42 0.74 1.06 1.08 0.78 0.65 1.14 0.64 1.10 1.14 1.34
9900 0.56 1.00 0.76 0.97 1.00 0.71 0.60 1.06 0.58 1.00 1.06 1.22
10200 0.51 0.94 0.06 0.89 0.94 0.65 0.56 0.99 0.53 0.91 0.99 1.12
10500 0.48 0.88 0.45 0.81 0.88 0.60 0.52 0.93 0.48 0.83 0.93 1.02
10800 0.45 0.82 0.74 0.73 0.82 0.55 0.48 0.87 0.44 0.75 0.87 0.94
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 0.42 0.78 0.34 0.66 0.78 0.51 0.45 0.82 0.40 0.68 0.82 0.86
11400 0.73 1 0.6 0.73 0.47 0.42 0.77 0.36 0.77 0.80
11700 0.69 5 0.5 0.69 0.44 0.37 0.75 0.73 0.73
12000 0.65 1 0.5 0.65 0.41 0.96 0.35 0.69 0.68
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
FL200.1
zeds & cees user's guide
57
Limit state capacity tables

Four lapped spans

Four lapped spans Lap


End span End span

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = Overall purlin length =


span + 70 mm + (Lap/2) span + 70 mm + (Lap/2)

Four lapped span: Z20019)(kN/m Fou4


r lapped span: Z2002 )(kN/m Four lapp
9ed span: Z2501 )(kN/m
IN O UT Load IN OT
U Load IN O UT Load
for for for
defl'n defl'n defl'n
Bridging > 0 1 2,3 0 1 2 3 span/150 0 1 2 3 0 1 2 3 span/150 0 1 2,3 0 1 2 3 span/150
Span 3000 14.21 18.71 18.71 18.71 18.71 18.71 18.71 35.18 18.71 18.71 18.71 18.71 18.71 18.71 18.71 18.71 46.45 16.52 16.52 16.52 16.52 16.52 16.52 16.52 57.13
(mm) 3300 11.11 16.38 16.38 16.38 16.38 16.38 16.38 26.22 14.52 17.04 17.04 17.04 17.04 17.04 17.04 17.04 34.62 14.29 14.29 14.29 14.29 14.29 14.29 14.29 42.58
3600 8.92 13.72 13.72 13.72 13.72 13.72 13.72 20.05 11.35 15.65 15.65 15.65 15.65 15.65 15.65 15.65 26.47 11.46 12.49 12.49 12.49 12.49 12.49 12.49 32.56
3900 7.31 11.63 11.63 11.63 11.63 11.63 11.63 15.66 9.10 14.47 14.47 14.47 14.47 14.47 14.47 14.47 20.68 9.36 11.01 11.01 11.01 11.01 11.01 11.01 25.43
4200 6.09 9.99 9.99 9.77 9.99 9.99 9.99 12.46 7.44 13.45 13.45 13.45 13.33 13.45 13.45 13.45 16.45 7.75 9.78 9.78 9.78 9.78 9.78 9.78 20.24
4500 5.13 8.66 8.66 8.01 8.66 8.66 8.66 10.07 6.19 12.57 12.57 12.57 11.06 12.57 12.57 12.57 13.30 6.48 8.73 8.73 8.73 8.73 8.73 8.73 16.36
4800 4.36 7.56 7.56 6.48 7.56 7.56 7.56 8.26 5.23 10.99 10.99 10.99 9.12 10.99 10.99 10.99 10.90 5.50 7.84 7.84 7.84 7.84 7.84 7.84 13.41
5100 3.73 6.52 6.52 5.10 6.52 6.52 6.52 6.85 4.46 9.48 9.48 9.48 7.40 9.48 9.48 9.48 9.05 4.70 7.07 7.07 6.78 7.07 7.07 7.07 11.13
5400 3.23 5.68 5.68 4.22 5.68 5.68 5.68 5.75 3.85 8.26 8.26 8.26 6.06 8.26 8.26 8.26 7.59 4.07 6.40 6.40 5.59 6.40 6.40 6.40 9.33
5700 2.82 5.00 5.00 3.53 5.00 5.00 5.00 4.87 3.35 7.26 7.27 7.27 5.02 7.27 7.27 7.27 6.43 3.55 5.82 5.82 4.66 5.82 5.82 5.82 7.90
6000 2.48 4.43 4.43 2.99 4.43 4.43 4.43 4.16 2.94 6.37 6.44 6.44 4.21 6.33 6.44 6.44 5.49 3.12 5.31 5.31 3.93 5.31 5.31 5.31 6.75
6300 2.20 3.95 3.95 2.55 3.95 3.95 3.95 3.58 2.60 5.63 5.75 5.75 3.55 5.53 5.75 5.75 4.73 2.76 4.86 4.86 3.34 4.86 4.86 4.86 5.81
6600 1.96 3.55 3.55 2.19 3.55 3.55 3.55 3.12 2.32 5.01 5.16 5.16 3.00 4.85 5.16 5.16 4.14 2.46 4.46 4.46 2.86 4.46 4.46 4.46 5.04
6900 1.75 3.21 3.21 1.88 3.12 3.21 3.21 2.74 2.08 4.49 4.66 4.66 2.55 4.28 4.66 4.66 3.65 2.20 4.07 4.07 2.44 4.07 4.07 4.07 4.40
7200 1.58 2.91 2.91 1.62 2.75 2.91 2.91 2.41 1.87 4.04 4.23 4.23 2.18 3.80 4.23 4.23 3.23 1.98 3.70 3.70 2.09 3.68 3.70 3.70 3.86
7500 1.43 2.65 2.65 1.40 2.42 2.65 2.65 2.14 1.69 3.65 3.86 3.86 1.88 3.38 3.86 3.86 2.87 1.79 3.37 3.37 1.81 3.22 3.37 3.37 3.40
7800 1.30 2.43 2.43 1.22 2.12 2.43 2.43 1.91 1.54 3.32 3.53 3.53 1.63 3.00 3.53 3.53 2.57 1.63 3.08 3.08 1.57 2.81 3.08 3.08 3.02
8100 1.18 2.23 2.23 1.07 1.87 2.23 2.23 1.71 1.40 3.02 3.25 3.25 1.42 2.67 3.24 3.25 2.31 1.48 2.83 2.83 1.37 2.40 2.83 2.83 2.71
8400 1.08 2.06 2.06 0.94 1.60 2.06 2.06 1.54 1.28 2.77 2.99 2.99 1.25 2.35 2.94 2.99 2.07 1.36 2.61 2.61 1.21 2.12 2.61 2.61 2.45
8700 0.99 1.91 1.91 0.83 1.43 1.91 1.91 1.39 1.17 2.54 2.77 2.77 1.10 2.08 2.67 2.77 1.86 1.24 2.42 2.42 1.06 1.89 2.42 2.42 2.23
9000 0.91 1.77 1.77 0.73 1.28 1.77 1.77 1.26 1.08 2.34 2.57 2.57 0.98 1.85 2.44 2.57 1.68 1.14 2.24 2.24 0.94 1.69 2.24 2.24 2.04
9300 0.86 1.73 1.76 0.67 1.20 1.70 1.76 1.16 1.01 2.27 2.56 2.56 0.89 1.71 2.35 2.56 1.55 1.07 2.23 2.23 0.85 1.58 2.23 2.23 1.88
9600 0.79 1.59 1.64 0.59 1.08 1.55 1.64 1.06 0.93 2.09 2.38 2.38 0.79 1.54 2.14 2.38 1.41 0.99 2.08 2.08 0.75 1.42 2.08 2.08 1.72
9900 0.73 1.48 1.53 0.53 0.98 1.41 1.53 0.97 0.87 1.94 2.21 2.22 0.71 1.38 1.96 2.22 1.29 0.92 1.94 1.94 0.67 1.28 1.88 1.94 1.58
10200 0.68 1.37 1.43 0.47 0.89 1.28 1.43 0.89 0.80 1.80 2.05 2.08 0.64 1.24 1.80 2.04 1.18 0.85 1.81 1.81 0.60 1.16 1.70 1.81 1.46
10500 0.63 1.27 1.34 0.43 0.81 1.16 1.34 0.82 0.75 1.68 1.91 1.95 0.58 1.11 1.65 1.89 1.08 0.79 1.68 1.70 0.54 1.05 1.54 1.70 1.34
10800 0.59 1.19 1.26 0.73 1.05 1.26 0.75 0.70 1.56 1.78 1.83 0.52 1.00 1.51 1.75 1.00 0.74 1.57 1.59 0.49 0.94 1.35 1.59 1.23
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 0.55 1.11 1.18 0.66 0.93 1.18 0.70 0.65 1.46 1.66 1.72 0.47 0.91 1.38 1.63 0.92 0.69 1.46 1.50 0.44 0.85 1.24 1.50 1.14
11400 0.52 1.04 1.11 0.60 0.85 1.10 0.64 0.61 1.36 1.55 1.62 0.43 0.82 1.25 1.51 0.85 0.64 1.36 1.41 0.40 0.77 1.13 1.41 1.05
11700 0.48 0.97 1.05 0.55 0.79 1.02 0.60 0.57 1.27 1.46 1.53 0.75 1.15 1.41 0.78 0.60 1.27 1.33 0.70 1.04 1.33 0.97
12000 0.45 0.91 0.99 0.50 0.72 0.95 0.56 0.54 1.19 1.37 1.45 0.68 1.05 1.31 0.73 0.56 1.18 1.26 0.64 0.96 1.26 0.91
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
FL200.2/250.1
zeds & cees user's guide
58
Limit state capacity tables

Four lapped spans

Four lapped spans Lap


End span End span

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = Overall purlin length =


span + 70 mm + (Lap/2) span + 70 mm + (Lap/2)

Four lapped span: Z25019)/25024 (kN/m Four lapped span: Z250)24 (kN/m
Load Load
IN T OU IN T OU
for for
deflect'n deflect'n
Bridging > 0 1 2, 3 0 1 2 3 span/150 0 1 2 3 0 1 2 3 span/150
Span 3000 18.72 18.72 18.72 18.72 18.72 18.72 18.72 76.40 18.71 18.71 18.71 18.71 18.71 18.71 18.71 18.71 78.80
(mm) 3300 15.97 15.97 15.97 15.97 15.97 15.97 15.97 56.91 17.04 17.04 17.04 17.04 17.04 17.04 17.04 17.04 58.73
3600 12.77 13.79 13.79 13.79 13.79 13.79 13.79 43.50 14.20 15.65 15.65 15.65 15.65 15.65 15.65 15.65 44.90
3900 10.19 12.03 12.03 12.03 12.03 12.03 12.03 33.97 11.35 14.47 14.47 14.47 14.47 14.47 14.47 14.47 35.08
4200 8.32 10.58 10.58 10.58 10.58 10.58 10.58 27.02 9.27 13.45 13.45 13.45 13.45 13.45 13.45 13.45 27.91
4500 6.91 9.37 9.37 9.37 9.37 9.37 9.37 21.84 7.70 12.57 12.57 12.57 12.57 12.57 12.57 12.57 22.56
4800 5.82 8.35 8.35 8.35 8.35 8.35 8.35 17.90 6.48 11.80 11.80 11.80 11.80 11.80 11.80 11.80 18.50
5100 4.97 7.49 7.49 7.49 7.49 7.49 7.49 14.85 5.53 11.12 11.12 11.12 9.68 11.12 11.12 11.12 15.35
5400 4.29 6.74 6.74 6.74 6.74 6.74 6.74 12.46 4.76 10.51 10.51 10.51 7.90 10.51 10.51 10.51 12.87
5700 3.74 6.10 6.10 5.45 6.10 6.10 6.10 10.55 4.14 9.31 9.31 9.31 6.53 9.31 9.31 9.31 10.90
6000 3.28 5.54 5.54 4.60 5.54 5.54 5.54 9.01 3.63 8.26 8.26 8.26 5.47 8.26 8.26 8.26 9.31
6300 2.90 5.05 5.05 3.91 5.05 5.05 5.05 7.76 3.21 7.37 7.37 7.37 4.60 7.37 7.37 7.37 8.01
6600 2.59 4.63 4.63 3.36 4.63 4.63 4.63 6.73 2.86 6.62 6.62 6.62 3.87 6.49 6.62 6.62 6.95
6900 2.31 4.19 4.19 2.90 4.19 4.19 4.19 5.87 2.56 5.97 5.98 5.98 3.28 5.72 5.98 5.98 6.06
7200 2.08 3.80 3.80 2.53 3.80 3.80 3.80 5.16 2.30 5.36 5.42 5.42 2.80 5.05 5.42 5.42 5.32
7500 1.88 3.47 3.47 2.21 3.47 3.47 3.47 4.58 2.08 4.84 4.95 4.95 2.41 4.48 4.95 4.95 4.70
7800 1.71 3.17 3.17 1.93 3.17 3.17 3.17 4.09 1.89 4.39 4.53 4.53 2.09 3.95 4.53 4.53 4.19
8100 1.56 2.91 2.91 1.69 2.91 2.91 2.91 3.66 1.72 4.00 4.16 4.16 1.82 3.48 4.16 4.16 3.75
8400 1.42 2.69 2.69 1.49 2.61 2.69 2.69 3.30 1.57 3.66 3.84 3.84 1.59 3.07 3.84 3.84 3.38
8700 1.30 2.49 2.49 1.32 2.31 2.49 2.49 2.98 1.44 3.36 3.55 3.55 1.40 2.71 3.55 3.55 3.06
9000 1.20 2.31 2.31 1.17 2.06 2.31 2.31 2.70 1.33 3.09 3.29 3.29 1.23 2.41 3.26 3.29 2.77
9300 1.13 2.30 2.30 1.08 1.86 2.30 2.30 2.49 1.23 2.97 3.28 3.28 1.12 2.22 3.13 3.28 2.55
9600 1.04 2.14 2.14 0.96 1.68 2.14 2.14 2.27 1.14 2.74 3.05 3.05 1.00 1.99 2.85 3.05 2.33
9900 0.96 1.99 1.99 0.86 1.52 1.99 1.99 2.07 1.06 2.53 2.85 2.85 0.89 1.78 2.61 2.85 2.13
10200 0.89 1.86 1.86 0.77 1.37 1.86 1.86 1.89 0.98 2.34 2.66 2.66 0.80 1.59 2.38 2.66 1.96
10500 0.83 1.75 1.75 0.70 1.25 1.75 1.75 1.74 0.91 2.17 2.49 2.49 0.72 1.43 2.17 2.49 1.80
10800 0.77 1.64 1.64 0.63 1.14 1.64 1.64 1.60 0.85 2.02 2.34 2.34 0.65 1.28 1.97 2.34 1.65
SECTIONS BELOW EXCEED THE NORMAL DELIVERY LENGTH OF 12000 mm

11100 0.72 1.54 1.54 0.57 1.04 1.53 1.54 1.47 0.80 1.88 2.20 2.20 0.59 1.16 1.79 2.18 1.52
11400 0.67 1.45 1.45 0.52 0.95 1.40 1.45 1.36 0.74 1.75 2.07 2.08 0.53 1.05 1.63 2.02 1.40
11700 0.63 1.37 1.37 0.47 0.87 1.28 1.37 1.26 0.70 1.64 1.94 1.96 0.49 0.95 1.49 1.88 1.30
12000 0.59 1.28 1.30 0.43 0.80 1.17 1.30 1.17 0.65 1.53 1.82 1.85 0.44 0.87 1.36 1.75 1.20
Bold capacities require grade 8.8 purlin bolts. Values above horizontal line in body of table are governed by the strength of the grade 8.8 bolt.
IN = Inward load capacity. OUT = Outward load capacity. See also: Design notes for capacity tables. In mixed spans, the thicker section is used in the end spans.
FL250.2
zeds & cees user's guide
59
Limit state capacity tables

Four lapped spans

Four lapped spans Lap


End span End span

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = Overall purlin length =


span + 70 mm + (Lap/2) span + 70 mm + (Lap/2)
zeds & cees user's guide
60
Limit state capacity tables

Four lapped spans

Four lapped spans Lap


End span End span

Span (mm) Span (mm) Span (mm) Span (mm)

Overall purlin length = Overall purlin length =


span + 70 mm + (Lap/2) span + 70 mm + (Lap/2)

zeds & cees user's guide


61
Limit state capacity tables

Cantilever spans

Cantilever spans 1. The capacities are for cantilevers with single end
span. The ends of the cantilevers are stabilised
by fascias, bridging, barge boards, perimeter
beams or similar structural members.
End span (mm) Cantilever (mm)
2. Bold capacities require grade 8.8 purlin bolts.
3. Bridging shown is for end spans only.
4. See also Design notes for capacity tables
zeds & cees user's guide
62
this page is left
blank intentionally.
do not prinT

zeds & cees user's guide


63
Product Descriptions
All descriptions, specifications, illustrations, drawings,
data, dimensions and weights contained in this catalogue,
all technical literature and websites containing information
from Lysaght are approximations only.
They are intended by Lysaght to be a general description
for information and identification purposes and do not
create a sale by description. Lysaght reserves the right at
any time to:
(a) supply Goods with such minor modifications from its
drawings and specifications as it sees fit; and
(b) alter specifications shown in its promotional literature
to reflect changes made after the date of such
publication.

Disclaimer, warranties and limitation of liability


This publication is intended to be an aid for all
trades and professionals involved with specifying
and installing Lysaght products and not to be a
substitute for professional judgement.
Terms and conditions of sale available at local
Lysaght sales offices.
Except to the extent to which liability may not
lawfully be excluded or limited, BlueScope Steel
Limited will not be under or incur any liability to you
for any direct or indirect loss or damage (including,
without limitation, consequential loss or damage
such as loss of profit or anticipated profit, loss of use,
damage to goodwill and loss due to delay) however
caused (including, without limitation, breach of
contract, negligence and/or breach of statute),
which you may suffer or incur in connection with this
publication.
© Copyright BlueScope Steel Limited 16 July, 2014
zeds & cees user's guide

www.lysaght.com
Technical enquiries: steeldirect@bluescopesteel.com
or call 1800 641 417
Please check the latest information which is always available on our website.
lysaght®, truecore®, zincalume®, hook-lok® and BlueScope are registered trade marks of
BlueScope Steel Limited, ABN 16 000 011 058. The LYSAGHT range of products is exclusively made
by or for BlueScope Steel Limited trading as Lysaght. PM 500 16/7/14 9

3
2
0
0
7
5

0
7
6
2
3
8

64

Vous aimerez peut-être aussi