Académique Documents
Professionnel Documents
Culture Documents
high-velocity
PDC drill bits
Taking PDC bit performance
to the next level
bhge.com
Designed for The Talon Force
improved performance high-velocity PDC bit
Since its introduction in 2012, the Talon™ family of bits, from StaySharp 2.0 cutter
Baker Hughes, a GE company (BHGE), has been proven as the Next-generation family of cutters stays
sharper longer for increased ROP and footage.
industry standard for PDC bits, delivering high-performance
cutting, mechanical, and hydraulic efficiency. Both the Talon Stabilis reinforced cutter
and Talon 3D products still deliver superior directional control Novel cutter geometry improves durability
and reduces torsional oscillations.
and high build-up (BUR) and penetration rates (ROP) in
challenging environments. Talon Force bit profiles
Application-specific bit profile boosts ROP
The newest advancement in bit technology—the Talon Force PDC bit—builds upon this foundation by introducing and run life, improving mechanical efficiency
improvements to cutting and mechanical efficiency through: and durability while minimizing vibration.
• Next-generation cutter technology • Optimized cutter layouts
• Cutter geometry enhancements • Lateral stability improvements
Optimized cutter
and blade layouts
Designs maximize stability and
drilling efficiency.
TI N G
CU TICIEN CY
EFF Cutting efficiency Shaped gauge pad
Advanced diamond technology helps cutters stay sharper longer to
Tungsten carbide and thermally stable PDC
increase ROP and footage
materials protect gauge pads and keep
bits in gauge longer. Geometry optimizes
Mechanical efficiency maximum cuttings evacuation.
IC A L
H Y D R AE N C Y
Short shank
CY
AN
LI
H
U
C
ME
Optimized hydraulic energy at the bit ensures maximum cuttings
FF
2 3
0.1
0
Standard Cutter Stabilis Reinforced Cutter
3
Standard cutter Stabilis reinforced cutter
Torque, kft*lb
industry-leading results.
1.5
Cutterresearch
Cutter research growth
growth
3.5
1.0
3
Normalized resources
2.5
0.5
2
1.5 0.0
3,900 4,400 4,900 5,400 5,900
1
Hole depth, m
0.5 Stabilis reinforced cutters not only add durability, but they also In an application with up to 50% chert layered throughout the
offer benefits in torsional stability. A bit using these cutters sees a interval, Stabilis cutters generated lower and more consistent
0
decrease in torque fluctuations while drilling. Controlling torsional torque and reduced weight on bit requirements—significantly
2010 2011 2012 2013 2014 2015
oscillations leads to smoother, more stable drilling resulting in improving drilling efficiency and increasing ROP.
higher ROP and improved overall performance of the run.
4 5
Talon
Bit response comparison
Talon Force
Optimized cutter layouts Enhanced lateral stability Improved ROP and 100
Talon Force drill bits combine these latest Using optimized blade layouts and strategic distance drilled
technology advances with application-specific radial positioning, Talon Force bits have The improved behaviors of the Talon 80
cutting structures designed to maximize maximized lateral stability, leading to Force bit compared to standard Talon
overall ROP and footage drilled. Bit profiles better use of downhole power and more products is evident with our proprietary bit
have been designed to promote ideal cutter efficient drilling. Additionally, this is done response software, the BitGenie™ drill bit 60
loading while combining the optimum in conjunction with hydraulic efficiency— selection tool. By capitalizing on cutting
aggressiveness and durability to meet any maximizing cleaning area to evacuate cuttings and mechanical efficiency gains, Talon Force
drilling objective. and keep cutters cooler for increased bit life. solutions improve overall ROP and footage to
40
maximize performance.
20
0
Aggressiveness Cleaning Lateral Torsional Side Bit Cutter Cutter Cutter
efficiency stability stability cutting durability abrasion impact thermal
resistance resistance stability
• Stay Sharp 2.0 cutter: improve cutter abrasion and impact resistance
and cutter thermal stability
• Stabilis reinforced cutter: improve torsional stability and
bit durability
Talon Force bit nomenclature • Frame enhancements: improve lateral stability and cleaning
efficiency and optimize aggressiveness for a
given application
Standard product – blank F -- Force
D-Technology ™ – D S -- steel nody
Talon Select – S Blank -- matrix
T -- Talon T D 5 06 F S X
Cutter size Blade count X -- backup cutters
2 --5/16 in. 8 mm
3 --7/16 in. 11 mm
4 --1/2 in. 13 mm
For more information on how Talon Force
5 --5/8 in. 16 mm
bits can take your drilling to the next level,
6 --3/4 in. 19 mm contact your local BHGE representative or
visit bhge.com.
8 --1 in. 25 mm
6 7
bhge.com
Copyright 2018 Baker Hughes, a GE company, LLC (“BHGE”). All rights reserved. The information contained in this document is company
confidential and proprietary property of BHGE and its affiliates. It is to be used only for the benefit of BHGE and may not be distributed,
transmitted, reproduced, altered, or used for any purpose without the express written consent of BHGE.
Baker Hughes reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time
without notice or obligation. Contact your BHGE representative for the most current information. The Baker Hughes logo, Talon, StaySharp,
Stabilis, D-Technology, and BitGenie are trademarks of Baker Hughes, a GE company, LLC. GE and the GE Monogram are trademarks of the
General Electric Company.
67291