Académique Documents
Professionnel Documents
Culture Documents
7) 7800 WALL ANGLE PERIMETER SHOWN BELOW. REFERENCE INSTALLATION INSTRUCTIONS FOR DETAILS ON ALTERNATIVE PERIMETER SOLUTIONS.
8) BOM DOES NOT ACCOUNT FOR THE USE OF SCRAP OR EXCESS MATERIAL CUT FROM OTHER ITEMS.
EXAMPLE LAYOUT AND BOM SHOWN WITH LYRA PANELS AND
SUPRAFINE SUSPENSION SYSTEM. REFER TO PRODUCT SPECIFIC
24.000 12.000 6.000 6.000 6.000 12.000 21.594 INSTALLATION INSTRUCTIONS FOR DETAILS ON ALL REQUIRED
COMPONENTS.
PERIMETER CUT PANELS
AND CROSS TEES PANEL PRODUCT FAMILIES COMPATIBLE WITH THIS LAYOUT:
LYRA, CALLA, OPTIMA, AND METALWORKS TEGULAR
MAIN BEAMS
60.000 O.C
EVERY OTHER
4
SIDE B
8
38' 6"
(462.000)
10
HANGER WIRE
60.000 O.C
EVERY OTHER
9
MAIN BEAMS
48.000 O.C
EVERY OTHER
40' 1"
(481.000)
11
INSTALLATION DETAIL DESIGNFLEX SR-0008-6 DRAWN BY: NJF DATE: 10/2/2018 PD
SCALE 1 / 10 6 5 7
These drawings show typical conditions which the Armstrong products depicted are installed. They are not a substitute for an architect's or engineer's plan and do not reflect the unique requirements of local building codes, laws, statutes, ordinances, rules and
regulations (Legal Requirements) that may be applicable for a particular installation. Armstrong does not warrant, and assumes no liability for the accuracy or completeness of the drawings for a particular installation or their fitness for a particular purpose. The user
is advised to consult with a duly licensed architect or engineer in the particular locale of the installation to assure compliance with all legal requirements. Armstrong is not licensed to provide professional architecture or engineering design services.