Académique Documents
Professionnel Documents
Culture Documents
Imagine: a high voltage motor that Imagine: a high voltage standard motor
is perfectly engineered, yet that is available today
has everything as standard • Shaft heights IEC 315 to 450
ABB has developed a cost-efficient, high - 110 to 750 kW at 50 Hz
voltage induction motor that can be offered - 3 to 10 kV
with a short delivery time. The motor is ideal • NEMA frames 506AT to 728
for the serial OEM who requires a standard - 150 to 950 HP (SF 1.15) at 60 Hz
product, the electrical and mechanical - 4 kV (star-connected stator),
properties of which do not need to be altered. 2.3 kV (delta-connected stator)
• Rib cooled cast iron frame
Imagine: a high voltage standard motor (IP55 / IC411 / TEFC)
that is easy to obtain and
• 2 to 8 poles
does not cost the earth
• Horizontal foot mounted, horizontal foot
The high voltage Process performance motor and flange mounted and vertical flange
utilizes a combination of ABB high voltage mounted
motor design expertise and the proven • IEC, NEMA, CSA
platform of ABB low voltage cast iron motors.
The result is a motor with:
• a straightforward design
• significantly lower price than that of an
engineered motor
• a standardized ordering process that ensures
a short delivery time
Imagine: a high voltage standard motor Imagine: a high voltage standard motor
for any pump, for any fan, for ready for the challenges
any compressor application of hazardous areas
The motor is designed to meet the demands of IEC
pumps, fans and compressors features: • Non-sparking: Ex nA II T3
• excellent starting characteristics • Dust ignition proof:
• low noise levels - Ex tD A22 IP55 / IP65 TA 125°C (for zone 22)
• low vibration - Ex tD A21 IP65 TA 125°C (for zone 21)
• low starting current NEMA, CSA certificate
• IP65 protection with a patent design valve • Non-sparking: Class I Division 2 Group ABCD T3
that closes the grease output channel or Class I Zone 2 Ex nA II T3
• highly reliable bearings and windings • Dust ignition proof: Class II Division 2 Group EFG
• long maintenance intervals or Class III
• long lifetime ATEX
• 40 °C ambient temperature; 50 °C ambient • Non-sparking: Ex nA II T3 (category 3 G)
temperature available (3.3 & 6.6 kV at 50 Hz) • Dust ignition proof:
- Ex tD A22 IP55 / IP65 TA 125°C (for zone 22)
Customer specific modifications are available for
- Ex tD A21 IP65 TA 125°C (for zone 21)
serial OEM’s
Printed in Finland,
Piirtek #12738
Brochure/BU HV Process performance motors EN 12-2006
http://www.abb.com/motors&drives © Copyright 2006 ABB. ABB reserves the right to change the design,
technical specification and dimensions without prior notice.
http://online.abb.com/motors&drives