LOFA Work Instructions 011-890-5551-54

Instructions for Cable Assembly Extension M12B Male to M12A Female 5P 50ft (CP750)

1. Assembly
a. Refer to Schleuniger Powerstrip 9500 instructions to cut cable (890-5550-02) the appropriate length
b. Unscrew the short end (sealant cap) of the connector and slide it on to the cable

c. Insert larger piece of the connector on to the cable keeping the white seal inside for easy
application.

d. Strip wires accordingly

e. For the female connector (043-0005-04), insert the white wire in to the #1 terminal, red in to #2,
green to #3 and black to #4 in a counterclockwise direction

Issue Date: Approved By: Rev number LOFA Industries, LLC Document Control No:
8/21/2018 INITIAL ISSUE 250 Hembree Park Dr., Suite 122 011-890-5551-54
Roswell, GA 30076
770-569-9828
 LOFA Work Instructions 011-890-5551-54

f. For the male connector (043-0005-03) repeat and place red into #1, white into #2, green into #3 and
black into #4 in a counterclockwise direction
g. Using an adjustable wrench, tighten both pieces of the connector together
h. With the male and female pointing to your right, place label on to the cable about an inch away
from the bottom of the connector
i. Following the lay of the cable, wrap it and secure with zip tie to keep it neat

2. Testing
a. Screw male connector into the backside of the CP750G2RT tester panel

b. Connect female end on to the Ambient Air Sender

Issue Date: Approved By: Rev number LOFA Industries, LLC Document Control No:
8/21/2018 INITIAL ISSUE 250 Hembree Park Dr., Suite 122 011-890-5551-54
Roswell, GA 30076
770-569-9828
 LOFA Work Instructions 011-890-5551-54

c. Connect panel text box connector into the CP750

d. To test the assembly, spray a duster in to the air sender. If the panel displays “LO” the cable is
assembled incorrectly.

3. Refer to 010-1440-02 instructions for packaging

Issue Date: Approved By: Rev number LOFA Industries, LLC Document Control No:
8/21/2018 INITIAL ISSUE 250 Hembree Park Dr., Suite 122 011-890-5551-54
Roswell, GA 30076
770-569-9828