Académique Documents
Professionnel Documents
Culture Documents
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Title: Installation of patch number 24368436 HIPR2 GPL to prevent system boot due to BUG 23526228
Doc Number: Not controlled Revision: 1.0
Oracle
Method of Procedure
Oracle Communications
Eagle STP
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Copyright © 1997, 2016, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions
on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in
your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify,
license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means.
Reverse engineering, disassembly, or decompilation of this software, unless required by law for
interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free.
If you find any errors, please report them to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it
on behalf of the U.S. Government, the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated
software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government
end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation
and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and
adaptation of the programs, including any operating system, integrated software, any programs installed
on the hardware, and/or documentation, shall be subject to license terms and license restrictions
applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management
applications. It is not developed or intended for use in any inherently dangerous applications, including
applications that may create a risk of personal injury. If you use this software or hardware in dangerous
applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other
measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any
damages caused by use of this software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks
of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks
are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD,
Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced
Micro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information on content, products,
and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly
disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle
Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your
access to or use of third-party content, products, or services.
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Contents
1.0 OVERVIEW .................................................................................................................................................... 5
1.1 LIST OF REQUIREMENTS ................................................................................................................................ 5
1.2 RECOMMENDATIONS: .................................................................................................................................... 5
1.3 REFERENCES ................................................................................................................................................. 5
1.4 ACRONYMS ................................................................................................................................................... 5
1.5 GLOSSARY..................................................................................................................................................... 5
PROCEDURE 1. CREATING THE REMOVABLE MEDIA ............................................................................ 6
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Attachments:
In Attendance Title Company Telephone #
No changes shall be made without the approval of the customer representative and the Oracle representative.
***ESCALATION CALLOUT LIST***
For any anomaly that results from any step in this, Method Of Procedure, halt the process immediately.
Escalate to the 1st authority from both Oracle and the customer as listed below. Both parties must agree to
problem resolution, and whether to proceed with the procedure
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
1.0 Overview
Certain Cases of E5 A-Series Card Boot May Cause HIPR2 Cards to Boot and Result in the STP Node
Booting (Node Isolation) (Doc ID: 2164046.1)
1.2 Recommendations:
1.3 References
1.4 Acronyms
GPL - Generic Program Load
IMT - Inter-Module-Transport
HIPR2 - High-Speed IMT Packet Router 2
1.5 Glossary
Not Applicable
-Patch number 24368436
Installation HIPR2
of patch GPL
number Rev Final
24368436 HIPR2.doc
GPL to
prevent system boot due to BUG 23526228
Doc No.: Not Controlled Revision: 1.0
Page 5 of 31
Oracle
5200 Paramount Parkway
Morrisville, NC 27560
888-FOR-TKLC
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
S
T This procedure will prepare a USB Removable Media (Part # 804-2153-
E Steps to be completed. R01)on the current release
P Estimated time of completion: 15 minutes
#
1.
Insert a USB drive in the ALL DATA ON THIS USB WILL BE LOST
active MASP card
Command Completed.
3.
Verify if the measurements >rtrv-meas-sched
“COLLECT is set to ON”
tekelecstp YY-MM-DD hh:mm:ss EST PPP XX.x.x-YY.y.y
COLLECT = off
SYSTOT-STP = (off)
SYSTOT-TT = (off)
SYSTOT-STPLAN = (off)
COMP-LNKSET = (off)
COMP-LINK = (off)
MTCD-STP = (on)
MTCD-LINK = (on)
MTCD-STPLAN = (on)
If measurements MTCD-LNKSET = (on)
COLLECT=ON continue
below, Otherwise skip to
next step
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
4. Insert the Removable Drive Once inserted, allow time for the RMD to be detected by the system.
(RMD) to be formatted into RMD is inserted in the Latched USB port on the active E5-MASP (Close
the drive slot on the active the latch and Slide the switch SW1 to locked position). Note: once the
MASP. RMD is detected by the system the SW1 Blue LED will be off.
5.
Format a removable USB >format-disk:type=system:force=yes
drive:
TekelecSTP 04-01-07 00:57:31 EST EAGLE 45.0.1
Format-disk of system removable cartridge started.
6. Activate measurements:
If measurements collection >chg-measopts:collect=on
is turned off in step 3
above execute this step to
turn it back on. tekelecSTP 08-06-01 14:31:25 EST EAGLE 45.0.1
CHG-MEASOPTS: MASP A - COMPLTD
7.
Copy the system GPLs to > copy-gpl:dloc=1113/1115 (Active MASP)
the USB
Command Accepted - Processing
Copy-gpl:dloc=<location of TekelecSTP 02-01-03 03:56:14 MST EAGLE5 45.0.1
the active MASP card> copy-gpl:dloc=1115
Command entered at terminal #1.
;
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
8.
Please follow procedure 5 to Download the Patch and to transfer to a USB removable
drive
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
End of Backup
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
S
T
E Steps to be completed. Estimated time of completion: 10 minutes
P
#
6. Login to Eagle
7. Locate the USB with the Locate the USB media with the pacth prepared previously. Identify the active
Debug GPL. And Identify MASP
the active MASP. Active: 1113________ 1115:_________
8. Insert the Removable Insert the USB which contains the updated HIPR2 GPL into the USB Drive for the
Drive (RMD) prepared on active MASP.
Procedure 5 with the
patch into the USB drive Once inserted, allow time for the RMD to be detected by the system.
slot on the active RMD is inserted in the Latched USB port on the active E5-MASP (Close the latch
MASP. and Slide the switch SW1 to locked position). Note: once the RMD is detected by
the system the SW1 Blue LED will be off.
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
End of Procedure 2
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Installing the updated HIPR2 GPL on HIPR2 cards one bus at a time
S
T
E Steps to be This procedure will Activate the new HIPR2 GPL on the Inactive MASP.
P completed. Estimated time of completion: 20 minutes
#
1. Login to the Eagle.
2. Start of Intrusive
Activity: **** START OF INTRUSIVE ACTIVITY ****
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Installing the updated HIPR2 GPL on HIPR2 cards one bus at a time
3. Verify the current >rtrv-gpl
Command entered at terminal #13.
GPL versions ;
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Installing the updated HIPR2 GPL on HIPR2 cards one bus at a time
5. Validate the debug
GPL is now the TRIAL > rtrv-gpl:gpl=hipr2
version Command Accepted - Processing
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Installing the updated HIPR2 GPL on HIPR2 cards one bus at a time
8. Validate the IMT
> rept-imt-info:report=hipr2err
busses are error free
before flashing the Command Accepted - Processing
============================================================================
Command Completed.
;
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Installing the updated HIPR2 GPL on HIPR2 cards one bus at a time
10. Issue the command > rept-
rept-stat-
stat-mux
to report the status TekelecSTP 02-01-25 00:43:13 MST EAGLE5 45.0.1-64.70.35
of the MUX cards. rept-stat-mux
Command entered at terminal #23.
;
Verify that all cards
Command Accepted - Processing
are IS-NR TekelecSTP 02-01-25 00:43:13 MST EAGLE5 45.0.1-64.70.35
NOTE: CARD TYPE PST SST AST BITRATE BITRATE
Reference:
Updating more than One HIPR2 Card at the Same Time
(910-6665-001 Revision B, February 2014 ) PageL..169.
Note: For systems with only one shelf: use the command below
> init-flash:loc=1109:code=appr:gpl=hipr2
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Installing the updated HIPR2 GPL on HIPR2 cards one bus at a time
12. Initialize the bus.
Caution: The > init-mux:bus=a
init-flash command Command Accepted - Processing
cannot be entered if
TekelecSTP 02-01-25 01:01:26 MST EAGLE5 45.0.1-64.70.35
the IMT Rate Change init-mux:bus=a
sequence or the Command entered at terminal #13.
Extended Bit Error ;
Rate Test (BERT) TekelecSTP 02-01-25 01:01:32 MST EAGLE5 45.0.1-64.70.35
Is being performed. Command Completed.
;
Command Completed.
14. Activate the flash for
all of the cards on > act-flash:sloc=1109:eloc=XX09:gpl=hipr2
the A-bus
Where YY is the last MUX card location that corresponds to the location recorded in step 10.
Note: For systems with only one shelf: use the command below
> act-flash:loc=1109:gpl=hipr2
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Installing the updated HIPR2 GPL on HIPR2 cards one bus at a time
15. Verify the HIPR2 GPLs > rept-stat-gpl:gpl=hipr2
on the fixed disk and
Command Accepted - Processing
the cards that are
running the HIPR2 TekelecSTP 02-01-25 00:37:18 MST EAGLE5 45.0.1-64.70.35
GPLs rept-stat-gpl:gpl=hipr2
Command entered at terminal #13.
;
Command Completed.
16. When bus A has been
> rept-imt-info:report=hipr2err
completed, validate
that it is error free: Command Accepted - Processing
============================================================================
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
S
T This procedure will be used to flash the card back to the previous (130-070-034)
E Steps to be completed.
P approved load.
#
1 Activate the GPL > act-gpl:gpl=hipr2:ver=134-070-034
allowing to become the Command Accepted - Processing
APPROVED GPL tekelecstp XX-XX-XX 16:06:28 CDT EAGLE 45.0.1-64.70.35
act-gpl:gpl=hipr2:ver=134-070-034
act- Command entered at terminal #13.
gpl:gpl=hipr2:ver=134- ;
070-034 tekelecstp XX-XX-XX 16:06:28 CDT EAGLE 45.0.1-64.70.35
HIPR2 activate on 1114 completed
HIPR2 activate on 1116 completed
Command Completed.
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Command Completed.
Where YY is the last MUX card location that corresponds to the location recorded in previous
Caution: The step.
init-flash
Command Accepted - Processing
command cannot be
entered if the IMT Rate TekelecSTP 02-01-25 00:43:13 MST EAGLE5 45.0.1-64.70.35
Change init-flash:sloc=1109:eloc=YY09:code=appr:gpl=hipr2
Command entered at terminal #13.
sequence ;
or the Extended Bit Error
TekelecSTP 02-01-25 00:43:13 MST EAGLE5 45.0.1-64.70.35
Rate Test (BERT) FLASH Memory Download for card 1109 Started.
is being performed. ;
TekelecSTP 02-01-25 00:44:33 MST EAGLE5 45.0.1-64.70.35
Command Completed.
;
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Command Completed.
6 Activate the flash for all > act-flash:sloc=1109:eloc=XX09:gpl=hipr2
of the cards on the A-
bus Where YY is the last MUX card location that corresponds to the location recorded in Procedure
5 step 10.
> act-flash:loc=1109
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
Command Completed.
8.
Once the status of the Once the status of the IMT busses has been validated, repeat steps 3-7 for bus B
IMT busses has been
validated, repeat steps Note: card locations will be XX10 and Bus=B where applicable
3-7 for bus B.
End of Procedure. 4
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
5.2 Objective:
This guideline will help to download the HIPR2 GPL patch to be used to fix a bug on the EAGLE STP.
23526228 - HIPR2 - booting when an "A" class LIM holds Flow Control to long
hipr2.elf
If the target release is different, please STOP and do not download the patch.
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
5.6.2 Login into the MOS portal with your user and password.
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
5.6.6 Saving the file: Click on the patch name and save the file in the desired location:
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
5.6.8 Open the Compressed File (You should have 2 files as in the example below)
README.txt
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
5.6.11 Insert the USB drive containing the Eagle GPLs prepared on the procedure 1 on your
PC.
Procedure 5 is completed
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
This procedure verifies that the IMT Bus is free of errors. Time
Visually verify LEDs on each Note each HMUX/HIPR card has three LED’s verify they are:
HMUX/HIPR card in XX09
ALIGN = GREEN
and XX10 positions for each
shelf in the STP. PROC = GREEN
SHELF = GREEN
Note: Verify that Both IMT 0391.1083 SYSTEM INFO REPT COND: system alive
Buses are ACTIVE, IN- Report Date:09-09-24 Time:10:48:45
SERVICE NORMAL and show
; cslabeagle4 09-09-24 10:48:51 EST EAGLE5 41.1.0-62.49.0
no ALARMS.
rept-stat-imt
Command Completed.
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.
6 >rept-
rept-imt-
imt-info:report=XXXXerr
Issue the report IMT
information command. (where report=hmuxerr if HMUX cards were detected in step 6;
report=hiprerr if HIPR cards were detected in step 6;
Repeat for all MUX types report=hipr2err is HIPR2 cards were detected in step 6.)
recorded
Truncated
THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS PROPRIETARY AND IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR
IN PART TO ANYONE WITHOUT THE WRITTEN PERMISSION OF ORACLE COPYRIGHT, © ORACLE 2016.