Académique Documents
Professionnel Documents
Culture Documents
ST Issue 10
��� Steam 1
saturation 4
��� curve
���
3
� D C B
���
� �� �� �� �� �� 2
Pressure bar g 5
This product must not be used in this region.
A - B Flanged ANSI 300.
A - C Flanged EN 1092 PN40.
A - D Flanged ANSI 150. Materials
Body design conditions ANSI 300 (PN50) No. Part Size Material
PMA Maximum allowable pressure 41 bar g @ 38°C 1 Body Austenitic stainless steel
ASTM A351 CF3M
TMA Maximum allowable temperature 450°C @ 21 bar g
DN15 - DN50 Austenitic stainless steel
Minimum allowable temperature -29°C ASTM A182F316L
ANSI 150 16 bar g 2 Cap
DN65 - DN200 Austenitic stainless steel
PMO Maximum operating pressure PN40 38 bar g ASTM A351 CF3M
ANSI 300 41 bar g 3 Cap gasket Reinforced exfoliated graphite
TMO Maximum operating temperature 450°C @ 21 bar g Austenitic stainless steel
4 Strainer screen
Minimum operating temperature -29°C ASTM A240 316L
Note: For lower operating temperatures consult Spirax Sarco. Austenitic stainless steel
5 Cap bolt
Designed for a maximum cold hydraulic test pressure of 76 bar g ISO 3506 A2-70
Local regulations may restrict the use of this product to below the conditions quoted.
In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2008
Kv values For conversion: Cv (UK) = Kv x 0.963 Cv (US) = Kv x 1.156
Size DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150 DN200
Perforations 0.8, 1.6 and 3 mm 5 8 13 22 29 46 72 103 155 237 340 588
Mesh 40 and 100 5 8 13 22 29 46 72 103 155 237 340 588
Mesh 200 4 6 10 17 23 37 58 83 124 186 268 464
B C
3
Withdrawal distance