Académique Documents
Professionnel Documents
Culture Documents
IN-700 Series 2a
For more specific information about your
To weigh your mail... mailing system, open the user guide at
Place your mail on the scale
www.neopostusa.com/H700helpdesk or
+ Tap the D2 zone on the screen and select www.neopostusa.com/H750helpdesk
Getting to know your mailing system 1 To reset previous settings... (Standard weighing).
www.neopostinc.com
Press Clear or Wake Consumables: contact your local dealer.
Touchscreen main zones
● If needed, press to get back to the home
D5 screen.
D0
D6
● To get back to default rate settings, press
on the keyboard.
2b orEnter the weight manually
D1 1 Tap the D2 zone on the screen and
● If the system is asleep, press to wake it
up with default settings. select (Manual weight entry).
D2 D7
2 Enter the weight and press OK.
D3 D8
D4 3 When the weight is displayed...
Choose rate and services
(tactile zones: )
D9
4 When the postage is displayed...
You are ready to print postage Current rate and selected
services are displayed in
If you want to print on a label or automatically seal
D0 USPS Rates and Services this zone of the screen.
the envelope, check additional options below.
D1 Date printed on mail piece To change the rate and/or add services:
D2 Weighing method 1 Press to start the motors of your mailing
D3 Envelope sealing system. 1 Press .
D4 Stamp position offset
2c IfKeyyouinknow
The Rate selection
D5 Selected stamp type (to change: K5) the amount... 2 Insert the mail piece in screen is displayed
D6 Postage value and mail piece weight postage value the mail path, the stamp
D7 Memorized imprint (can contain rate, stamp settings printing position on the
and account) 1 Type the Postage amount on the keyboard. upper right side. 2 Use rate buttons 1 to 9 to select an available
D8 Current Account selected Class and/or Services, or select Rate wizard.
D9 Funds available in Meter (adding funds: K4) 2 Press OK.
3 Press OK to validate your selection and return to
Shortcut keys The home screen To print on labels: the home screen.
displays the postage. 1 Insert labels into the
dispenser until the click,
printing side facing the
K1 K6 right.
A0013300/A - 28/05/2013
K2 to print and then press .
K7
K3
K8 To seal the envelopes:
K4 Tap the D3 zone on the screen to activate
( ) or deactivate ( ) the sealer.
K5 Don't forget to check the water level