The new two-component silicone foam cures in just a few Advantages: minutes after application at room temperature. This elimina- • Tack-free in just a few minutes at room temperature tes the curing in an oven that is otherwise typical for silicone • Low hardness (Shore 00), low compression hardness for foam. RAKU® SIL enables rapid installation and removes an low installation forces entire production step. • High chemical and temperature resistance
RAKU® SIL 37-1001
The compact silicone gasket is a soft elastomer with high Advantages: long-term heat resistance, excellent chemical resistance, • High long-term heat resistance and fast curing in an oven. • Fast reaction under the effects of heat • Adheres to numerous substrates without additional primer
RAKU® PUR 32-3278
The low-emission polyurethane foam gasket ensures ul- Advantages: tra-low emissions and VOC values, and meets the stan- • Ultra-low emissions (VOC, FOG) dards of leading automotive manufacturers. • High mechanical strength • Compact, hydrophobic integral skin Silicone and polyurethane sealing systems Product overview
RAKU® SIL 37-1210 RAKU® SIL 37-1001 RAKU® PUR 32-3278-X
Tack-free time / curing 8 minutes 5 – 10 minutes at 80 – 120 °C 8 – 10 minutes
Applications >>Battery covers >>Battery covers >>Automotive interiors (NVH) >>Battery charging stations >>Battery charging stations >>Air conditioning equipment >>Battery charging connectors >>Battery charging connectors >>Speakers >>Other components in >>Other components in >>Battery covers eMobility and automotive eMobility and automotive >>Other components in applications applications eMobility and automotive applications
Properties >>Closed-cell structure >>High chemical resistance >>Meets standards of leading
>>Can be used at temperatures >>High long-term heat resistance automotive manufacturers to from -50 °C to 220 °C VDA 278 (emission test) and >>Can be used at temperatures VDA 270 (odor test) >>Good UV resistance from -50 °C to 220 °C >>Low water absorption >>Good chemical resistance >>Adheres to a wide range of substrates without additional >>Good physical properties >>Good mechanical strength primer >>Visually attractive surface >>Low water absorption >>Fast reaction under the effects >>Good hydrolytic resistance of heat >>Good dielectric properties >>Low water absorption
At temperatures above 100°C, we recommend tempering the gasket at 120°C for 20 minutes to improve compression set and ensure optimum compression recovery.
RAMPF Polymer Solutions GmbH & Co. KG
Robert-Bosch-Straße 8 –10 l 72661 Grafenberg T +49.7123.9342-0 l E polymer.solutions@rampf-gruppe.de www.rampf-gruppe.de