Académique Documents
Professionnel Documents
Culture Documents
BESOTHERM® SYN XT
Synthetic Heat-Transfer Fluid
Technical Designation
Mild Order
Density at 25⁰C/77⁰F ~8.35 lbs/gal
Specific Gravity @ 77°F/25°C~0.99
Properties
Most suitable for indirect heating of reactors,
polymerization vessels and distillation NOTE OF CAUTION – At very high temperatures,
low-boiling and high-boiling decomposition
columns.
products may be formed. The decomposition
Suitable for use in heating and cooling products remain completely dissolved in the
systems. BESOTHERM SYN XT charge. A build-up of low
boilers should, however, be avoided, since they can
Best benefits when the heat-transfer systems impair the operation of the heat-transfer system,
designed and operated in accordance with particularly in upper range from 250⁰C to 300⁰C
the recommendation of DIN 4754-"Heat-
transfer installation working with organic
heat-trasfer fluids"
Thermally stable up to very high operating
temperatures.
Non resinous, contains no acid or silicone
Technical Data
Physical Properties
Appearance Water white to straw yellow,
Odor < 1400
Mild
Composition Synthetic hydrocarbon mixture
Moisture Content (maximum) 300 ppm
Density, at 25°C/77°F 8.35 lbs/gal
Specific Gravity @ 77°F/25°C 0.99
* Data represents typical laboratory samples and are not guaranteed for all samples
While the information and figures given here are typical of current production and confirm to BESOLUBE specification, minor variations may
occur.No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the product