Académique Documents
Professionnel Documents
Culture Documents
ET-5050 1W HR Datasheet
Features :
■■ High luminous Intensity and high efficiency
■■ Based on GaN technology
■■ Wide viewing angle : 120°
■■ Excellent performance and visibility
■■ Suitable for all SMT assembly methods
■■ IR reflow process compatible
■■ Environmental friendly; RoHS compliance
Typical Applications :
■■ Signal and symbol luminaire
■■ Indoor displays
■■ Backlighting (illuminated advertising, general lighting)
■■ Interior automotive lighting
■■ Emergency lighting
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 1
www.edison-opto.com
Table of Contents
General Information..........................................................................................................................................................3
Absolute Maximum Ratings...........................................................................................................................................4
Characteristics.....................................................................................................................................................................4
Luminous Flux Characteristic.........................................................................................................................................5
Voltage Bin Structure........................................................................................................................................................5
Mechanical Dimensions...................................................................................................................................................6
Characteristic Curves........................................................................................................................................................7
Reflow Profile.......................................................................................................................................................................9
Product Packaging Information....................................................................................................................................10
Revision History..................................................................................................................................................................11
About Edison Opto............................................................................................................................................................11
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 2
www.edison-opto.com
General Information
Introduction
High power PLCC is a surface mount, compact, high brightness LED that is built for various
illumination needs. A single Cool White high power PLCC can deliver typical luminous flux of 115
lm while driving at 60mA suitable for any kind of lighting sources, including general illumination,
flashlights, spotlights, tube light source, freezer lighting, industrial and commercial lightings.The
small physical dimension can free customers from any constrains or limitations in these fields of
applications. Furthermore, the reflow-solderable nature of high power PLCC provides an easy path
towards the optimum thermal management to achieve a promising reliability.
2 T xx xx xx xx 000 xxx
X1 X2 X3-X4 X5-X6 X7-X8 X9-X10 X11-X13 X14-X16
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 3
www.edison-opto.com
Absolute Maximum Ratings
DC Forward Current IF 60 mA
Pulse Forward Current (tp≤100μs, Duty cycle=0.25) Ipulse 100 mA
Reverse Voltage VR 5 V
LED Junction Temperature TJ 125 °C
Operating Temperature - -40 ~ +85 °C
Storage Temperature - -40 ~ +120 °C
ESD Sensitivity (HBM) VB 2,000 V
Reflow Soldering : 255~260oC/10~30sec
Soldering Temperature TS
Manual Soldering : 350oC/3sec
Absolute maximum ratings (Ta=25oC)
Notes:
1. The values are based on 1-die performance.
2.* IFP condition: pulse width ≤0.1msec and duty ≤1/10.
Characteristics
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 4
www.edison-opto.com
Luminous Flux Characteristic
Luminous Flux Characteristics, IF=60mA and TJ=25˚C
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 5
www.edison-opto.com
Mechanical Dimensions
Unit: mm
Tolerance: ±0.2mm
1 4 1 4
2 5 2 5
3 6 3 6
2.6
0.4
2o o 5, Slug
1.8
Notes:
1. All dimensions are measured in mm.
2. Tolerance : ± 0.2 mm
3. PLCC Slug without polarity.
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 6
www.edison-opto.com
Characteristic Curves
Spectrum
Normalized output
Normalized output
Radiation Diagram
Normalized Relative Intensity
Normalized output
Forward Voltage vs. Forward Current Luminous Flux vs. Forward Current
100
Normalized Luminous Flux
90
Forward Current (mA)
80
70
60
50
40
30
20
10
0
15 16 17 18 19 20 21
Forward Voltage (V) Forward Current (mA)
Forward current vs. forward voltage for 1W PLCC 5050 Forward current vs. luminous flux at Ta=25oC for 1W PLCC 5050
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 7
www.edison-opto.com
CCT vs. Forward Current Luminous Intensity vs. Forward Current
7500 1.6
5000 0.8
4500 0.6
4000
0.4
3500
3000
0.2
2500 0
20 40 60 80 100 120 20 40 60 80 100 120
Forward Current (mA) Forward Current (mA)
Forward current vs. CCT at Ta =25oC for 1W PLCC 5050 Luminous Intensity vs. Forward Current for 1W PLCC 5050
Forward voltage vs. Junction temperature Luminous Flux vs. Junction temperature
1 1.1
Cool White
Normalized Forward Voltage
Natural
Neutral White
1 Warm White
0.8
0.9
0.6 0.8
0.4 0.7
0.6
0.2
0.5
0 0.4
0 10 20 30 40 50 60 70 80 90 100 110 120 130 25 45 65 85 105
Junction Temperature (oC) Junction Temperature (oC)
Forward voltage vs. Junction temperature for 1W PLCC 5050 Luminous Flux vs. Junction temperature for 1W PLCC 5050
Neutral
Natural White
6000 1 Warm White
Cool White
5500 Neutral White
Natural
Warm White 0.8
5000
CCT
4500 0.6
4000
0.4
3500
3000
0.2
2500
2000 0
25 45 65 85 105 400 450 500 550 600 650 700 750 800
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 8
www.edison-opto.com
Reflow Profile
The following reflow profile is from IPC/JEDEC J-STD-020D which provided here for reference.
Reflow Profiles
Notes:
1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum.
2. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum.
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 9
www.edison-opto.com
Product Packaging Information
40±0.20 40±0.20
5o
A A’
B 1.3
1.6±0.10
5o
1.5±0.1
5.3±0.10 SEC:B-B’
SEC:A-A’ 4 1.3
Seal
Label
Reel Label
Moisture absorbent
material Moisture
proof bag
Taping reel dimensions Package & label
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 10
www.edison-opto.com
Revision History
Copyright © 2013 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 11
www.edison-opto.com