Académique Documents
Professionnel Documents
Culture Documents
81
Performance Data
Input TIG (GTAW) Stick (SMAW) AC TIG Material DC TIG Material Stick Electrode Generator
Power Duty Cycle Duty Cycle Thickness Range Thickness Range Maximum Diameter Requirement
208–480 V 210 A, 60% 210 A, 30% 0.012 –1/4 in. 0.002 –1/4 in. 6010: 3/16 in. (4.8 mm) 9 kW
175 A, 100% 160 A, 60% (0.3 – 6.4 mm) (0.05 – 6.4 mm) 7018: 5/32 in. (4.0 mm)
125 A, 100% 7024: 5/32 in. (4.0 mm)
120 V 150 A, 40% 100 A, 40%
125 A, 60% 90 A, 60%
100 A, 100% 75 A, 100%
• Dynasty® models with CPS turn Coolmate 1.3 • Efficient fin and tube heat exchanger
on and off • Factory-set pressure relief valve (55 psi)
• Power indicator light maintains consistent pressure during operation
• Fluid level sight window • Filter and coolant filling spout are conveniently
• Rustproof polyethylene-molded coolant tank located
and filler spout • Brass-body, positive displacement rotary vane
• 1/4 hp motor is thermally protected to guard pump provides consistent coolant flow and
against overheating pressure rating with long pump-life expectancy
Input Power Maximum Current Draw Maximum Cooling Capacity Rated Cooling Capacity Tank Capacity Dimensions Net Weight
115 V, 60 Hz 4.7 A (60 Hz) 3,400 W (11,600 Btu/hr.) 1,330 W (4,540 Btu/hr.) 1.3 gal. (4.9 L) H: 11.25 in. (286 mm) 43 lb.
3.8 qt./min. (3.6 L/min.) 1.1 qt./min. (1 L/min.) W: 10.375 in. (264 mm) (20 kg)
D: 24 in. (610 mm)
2
Weldcraft W-250 (WP-20) TIG Torch
™
3
Dynasty 210 Control Panel
®
7
1
8
2 9
3
4
10
5
11
12
6
13
User Menu (Hold Menu button three seconds.) Tech Menu (Hold Menu button five seconds.)
AC TIG 1. Arc Time 0.0–9,999 hours
1. Start = HF/Lift Arc 0.0–59 minutes
2. Tungsten Size = .020 –1/8 in. or .05 – 3.2 mm 0–999,999 cycles
3. Remote Trigger = STD/HOLD/OUTPUT ON Resettable
AC Stick 2. Error Log = Error event recorder
1. Hot Start = ON/OFF 3. Sleep Timer = 1/5/10/15/30/45MIN/1HR
2. Remote Trigger = OUTPUT ON/STD 4. Stick Stuc = OFF/ON
5. OCV = LOW/NORM
DC TIG 6. Cooler Power = AUTO/OFF (only on Dynasty models with CPS)
1. Start = Lift Arc/HF 7. Machine Reset
2. Tungsten Size = .020 –1/8 in. or .05 – 3.2 mm 8. Software Number
3. Remote Trigger = STD/HOLD/OUTPUT ON 9. Serial Number
DC Stick
1. Hot Start = ON/OFF
2. Remote Trigger = OUTPUT ON/STD
4
Dynasty 210 DX Control Panel
®
8
1
9
2 10
11
4 12
5
6 13
7 14
1. Standby Switch 11. Amperage Button
2. Voltmeter Display TIG AC 2–210 A**
3. Ammeter Display TIG DC 1–210 A**
Stick 5–210 A
4. Polarity AC/DC
12. AC Waveshape
5. Process/ TIG: HF impulse, Lift-Arc Balance* Ball (30%), 50–99% EN
Arc Starting Stick: Adaptive Hot Start Frequency* 20–400 Hz
6. Output Control Standard remote, 13. Gas/DIG
2T trigger hold, Preflow 0.0–25.0 seconds
Output on Postflow Auto/Off–50 seconds
7. Pulser Control DIG* Off–100%
Pulses per Second* DC : 0.1– 500 PPS 14. Sequencer Control
AC : 0.1– 500 PPS Initial Amps AC: 2–210 A**
Peak Time* 5 – 95% DC: 1–210 A**
Background Amps* 5 – 95% Initial Time 0.0–25.0 seconds
8. Memory Card Port Initial Slope 0.0–50.0 seconds
9. Activity Indicator Weld Time 0.0–999 seconds
10. Encoder Control Final Slope 0.0–50.0 seconds
Final Amps AC: 2–210 A**
DC: 1–210 A**
Final Time 0.0–25.0 seconds
*Pro-Set parameter selectable. **Amperage range is tungsten size dependent.
User Menu (Press Gas and Amperage buttons.) Tech Menu (Hold Gas and Amperage buttons three seconds.)
1. Tungsten Size = .020 –1/8 in./GEN or .05 – 3.2 mm 1. Arc Time 0.0–9,999 hours
2. Remote Trigger = 2T/3T/4T/4TL/4TE/4Tm 0.0–59 minutes
3. Wave Form = SOFT/ADVS/SINE/TRI 0–999,999 cycles
4. Stick Hot Start = ON/OFF Resettable
2. Error Log = Error event recorder
3. Sleep Timer = 1/5/10/15/30/45MIN/1HR
4. Stick Stuc = OFF/ON
5. OCV = LOW/NORM
6. Weld Timers = OFF/ON
7. Cooler Power = AUTO/ON/OFF (only on models with CPS)
8. Locks = OFF/1–4
9. External Pulse Control = OFF/ON
10. Machine Reset
11. Software Number
12. Serial Number
5
Dynasty 210 Models/Packages
®
Build an
Air-Cooled
Package
Select desired
stock number
for each step. 907685 301311
Dynasty shown. kit shown.
Dynasty 210 907685 Note: For models without the Foot Control Contractor Kit 301309
Dynasty 210 (CPS) 907685002 Cooler Power Supply (CPS), the Fingertip Control Contractor Kit 301311
Dynasty 210 DX 907686 Coolmate 1.3 must be powered through
Dynasty 210 DX (CPS) 907686002 an external 120-volt facility power.
Dynasty comes with adjustable shoulder strap, 8 ft. power cord (no plug), See page 7 for kit contents.
quick reference guide and two 50 mm Dinse-style connectors.
907685001
Build a Dynasty 210
TIGRunner® shown
Water-Cooled with four bottles
Package of 043810
Low-Conductivity
Select desired
Coolant.
stock number
for each step.
Step #1 • Select Dynasty TIGRunner® and Coolant Step #2 • Select Remote Control Step #3 • Select Torch Kit
Dynasty 210 (CPS) TIGRunner 907685001 Wireless Foot (recommended) 300429 W-250 Kit 300185
Dynasty 210 DX (CPS) TIGRunner 907686001 RFCS-14 HD Foot 194744 (recommended for 210 model)
& RCC-14 E/W Fingertip 151086 W-280 Kit 300990
Low-Conductivity Coolant 043810 RCCS-14 N/S Fingertip 043688
(Must be ordered in quantities of four.) RMS-14 Pushbutton 187208
RMLS-14 Momentary/Maintained 129337
RHC-14 Hand 242211020
Wireless Hand 300430
Dynasty TIGRunner comes with 8 ft. power cord (no plug), See page 7 for remote descriptions. See page 7 for kit contents.
quick reference guide, Coolmate™ 1.3 and Small Runner™ cart.
Preconfigured
Select Water-Cooled Complete Package
Water-Cooled
Packages 951669 Dynasty 210 (CPS) Complete with Foot Control 951666
package shown. Dynasty 210 (CPS) Complete with Wireless Foot Control 951667
Use a single stock number Dynasty 210 DX (CPS) Complete with Foot Control 951668
to order a complete Dynasty 210 DX (CPS) Complete with Wireless Foot Control 951669
preconfigured system.
Comes with:
• 8 ft. power cord (no plug)
• Quick reference guide
• Coolmate™ 1.3 300972
• Coolant (4 one-gallon bottles of 043810)
• Small Runner™ cart 301318
• Remote control 194744 (foot) OR remote control 300429 (wireless foot)
• W-250 torch kit 300185 (see page 7 for contents)
6
Genuine Miller Accessories ®
Protective Cover 301382 TIG Torches, Kits and Connectors RFCS-14 HD Foot Control 194744
Fits Dynasty 210/280 and Maxstar 280. Maximum flexibility is accomplished with a
Contractor Kits reconfigurable cord that can exit the front, back
2-Wheel Trolley Cart 300971 301309 150 A RFCS-14 HD Foot Pedal Kit or either side of the pedal. Foot pedal provides
Easy-to-maneuver two-wheel 301311 150 A RCCS-14 Fingertip Kit remote current and contactor control. Includes
cart features single-cylinder All-in-one TIG/stick welding kit comes with either 20-foot (6 m) cord and 14-pin plug.
rack, chain for cylinder, cable a RFCS-14 HD foot control OR RCCS-14 fingertip
holders, torch holder, storage control, Weldcraft™ A-150 TIG torch, 200-amp RCC-14 Remote Contactor and Current Control
area, and filler rod storage area. stick electrode holder and 300-amp work clamp 151086
Works with Dynasty®/Maxstar® with 15-foot (4.6 m) cables, flow gauge regulator East/west rotary-motion fingertip control attaches
210 and 280 with Coolmate 1.3 with 12-foot (3.7 m) gas hose, gas hose coupler, to TIG torch using two hook-and-loop fasteners.
cooler. Straps also included for mounting AK2C torch accessory kit and TIG torch connector. Includes 26.5-foot (8 m) cord and 14-pin plug.
Dynasty/Maxstar 200 with Coolmate 1 cooler. RCCS-14 Remote Contactor and Current Control
Weldcraft™ A-150 (WP-17)
Small Runner Cart
™ 043688
TIG Torch
301318 North/south rotary-motion fingertip control
WP-17-12-R (12 ft.)
Designed for Dynasty/Maxstar attaches to TIG torch using two hook-and-loop
WP-17-25-R (25 ft.)
210 and 280 with or without fasteners. Includes 26.5-foot (8 m) cord and
150-amp air-cooled torch.
Coolmate 1.3 cooler. Cart 14-pin plug.
Torch body gas valve
features single-cylinder rack, models are available. RMS-14 On/Off Control 187208
foot pedal holder, two Note: A-150 (WP-17) torches require 195378 connector. Momentary-contact switch for contactor
cable/torch holders, and two control. Rubber-covered pushbutton dome
TIG filler rod holders. Air-Cooled TIG Torch Connectors
switch ideal for repetitive on-off applications.
195378* All air-cooled torches (except A-200)
Includes 26.5-foot (8 m) cord and 14-pin plug.
Coolmate™ 1.3 195379 A-200 (WP-26)
300972 120 V 50 mm Dinse-style for one-piece air-cooled torch. RMLS-14 Switch 129337
1.3-gallon cooler designed to *A-80 (WP-24) torches require 24-5 connector. Momentary- and maintained-contact rocker
cool torches up to 280 amps. switch for contactor control. Push forward for
Water-Cooled Torch Kits
maintained contact and backward for momentary
300185 W-250 (recommended)
contact. Includes 26.5-foot (8 m) cord and
Performance TIG Gloves 300990 W-280
14-pin plug.
263345 X-Small Kit comes with Weldcraft™ 25-foot (7.6 m) TIG
torch with Dinse-style connector, torch cable RHC-14 Hand Control 242211020
263346 Small
cover, work clamp with 15-foot (4.6 m) cable, Miniature hand control for remote current and
263347 Medium
flowmeter regulator with gas hose and torch contactor control. Dimensions: 4 x 4 x 3.25 inches
263348 Large
accessory kit (1/16-, 3/32- and 1/8-inch 2% ceriated (102 x 102 x 83 mm). Includes 20-foot (6 m)
263349 X-Large
tungsten, nozzles, collets and collet bodies). cord and 14-pin plug.
Completely unlined, goat grain
leather with triple-padded palm. Weldcraft™ W-225 Modular Wireless Remote Hand Control
(WP-225) TIG Torch 300430
Memory Cards WP-225-12-R (12 ft.) For remote current and contactor
WP-225-25-R (25 ft.) control. Receiver plugs directly
Memory Card Expansion
225-amp water-cooled into the 14-pin receptacle of Miller
301235 Independent AC Expansion
torch. Includes 1726 and machine. 300-foot (91.4 m) operating range.
Allows EP and EN amperages and waveforms to
be set independently to precisely control heat 9-70 torch heads.
input to the work and electrode. Note: W-225 Modular (WP-225) torch requires Educational Materials
195377 connector. To order, please call Miller Literature at 866-931-9732
301151 14-Pin Automation Expansion
Provides the ability to access common automation Water-Cooled TIG Torch Connector 195377 or visit MillerWelds.com/resources/tools.
functions through the 14-pin connection. 50 mm Dinse-style with water return line. For Gas Tungsten Arc Welding (TIG) Publication
301152 14-Pin Modbus® Expansion use with all Weldcraft™ water-cooled torches. 250833
Provides the ability to access basic and advanced Setup DVD 251116
functions through the 14-pin connection. Remote Controls and Switches
Video topics include tungsten selection, setup
Memory Card (Blank) 301080 Wireless Remote Foot Control 300429 menus, DC pulse, sequencer, balance and
A blank, commercially available memory card used For remote current and contactor control. Receiver frequency settings.
for transferring software updates and expandable plugs directly into the 14-pin receptacle of Miller
features from your computer to the machine. machine. 90-foot (27.4 m) operating range.
Tungsten
Tungsten Amp Range 2% Ceriated (AC/DC) 2% Lanthanated (AC/DC)
1/16 in. (1.6 mm) 70 –150 A WC116X7 WL2116X7
3/32 in. (2.4 mm) 140 – 250 A WC332X7 WL2332X7
1/8 in. (3.2 mm) 225 – 400 A WC018X7 WL2018X7
5/32 in. (4.0 mm) 300 – 500 A WC532X7 WL2532X7
7
Ordering Information
Equipment and Options Stock No. Description Qty. Price
Dynasty 210
® 907685 Auto-Line 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
™
Dynasty® 210 (CPS) 907685002 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
Dynasty® 210 DX 907686 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
Dynasty® 210 DX (CPS) 907686002 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
Dynasty® 210 DX (CPS) International 907686003 Auto-Line™ 120 – 480 V, 50/60 Hz, CE. 8 ft. power cord
Water-Cooled Packages
Dynasty® 210 (CPS) TIGRunner® 907685001 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
(Torch kit, accessories and coolant sold separately)
Dynasty® 210 DX (CPS) TIGRunner® 907686001 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
(Torch kit, accessories and coolant sold separately)
Dynasty® 210 (CPS) Complete w/Foot Control 951666 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
Dynasty® 210 (CPS) Complete 951667 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
with Wireless Foot Control
Dynasty® 210 DX (CPS) Complete w/Foot Control 951668 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
Dynasty® 210 DX (CPS) Complete 951669 Auto-Line™ 120 – 480 V, 50/60 Hz, CSA. 8 ft. power cord
with Wireless Foot Control
Accessories
Protective Cover 301382 For Dynasty 210/280 and Maxstar 280
2-Wheel Trolley Cart 300971 See page 7
Small Runner™ Cart 301318 See page 7
Coolmate™ 1.3 300972 120 V, 60 Hz, CSA. Requires coolant
TIG Coolant (Must be ordered in quantities of four) 043810 1-gallon plastic bottle. Protects against freezing to
-37° Fahrenheit (-38° C) or boiling to 227° Fahrenheit (108° C)
TIG Gloves See page 7
Memory Cards See page 7
TIG Torches, Kits and Connectors
Air-Cooled Contractor Kits 301309 Foot pedal
301311 Fingertip
Weldcraft™ A-150 (WP-17) TIG Torch WP-17-12-R 12 ft. (3.7 m) cable. Requires 195378 connector
WP-17-25-R 25 ft. (7.6 m) cable. Requires 195378 connector
Weldcraft™ A-200 (WP-26) TIG Torch WP-26-12-R 12 ft. (3.7 m) cable. Requires 195379 connector
WP-26-25-R 25 ft. (7.6 m) cable. Requires 195379 connector
Air-Cooled TIG Torch Connectors 195378 Connects all air-cooled Weldcraft™ torches (except A-200) to
Dinse-style connector. A-80 (WP-24) torches require 24-5 connector
195379 Connects Weldcraft™ A-200 (WP-26) torch to Dinse-style connector
Water-Cooled Torch Kits 300185 W-250 (Recommended for Dynasty 210)
300990 W-280
Weldcraft™ W-225 Modular (WP-225) TIG Torch WP-225-12-R 12 ft. (3.7 m) cable. Requires 195377 connector
WP-225-25-R 25 ft. (7.6 m) cable. Requires 195377 connector
Water-Cooled TIG Torch Connector 195377 Connects Weldcraft™ water-cooled torches to Dinse-style connector
Tungsten See page 7
Remote Controls
Wireless Remote Foot Control 300429 Foot control with wireless 90 ft. (27.4 m) operating range
RFCS-14 HD 194744 Heavy-duty foot control
RCC-14 151086 Side-to-side (east/west) fingertip control
RCCS-14 043688 North/south fingertip control
RMS-14 187208 Momentary rubber dome switch
RMLS-14 129337 Momentary/maintained rocker switch
RHC-14 242211020 Hand control
Wireless Remote Hand Control 300430 Hand control with wireless 300 ft. (91.4 m) operating range
Educational Materials
Gas Tungsten Arc Welding (TIG) Publication 250833
Setup DVD 251116
Distributed by: