Académique Documents
Professionnel Documents
Culture Documents
MANDAL'S
DEOGIRI INSTITUTE OF ENGINEERING AND MANAGEMENT STUDIES, AURANG
MECHANICAL ENGINEERING DEPARTM
Machine Design-I
Continuous Assessment-I
Note:- Solve any Ten
The types of standards used in design office are
a) standards prepared by Bureau of Indian Standards
Q.1
C)Standards prepared by professional bodies like American Gear Manufacturing Association
Q3 a) plain carbon steel with ultimate tensile strength of 400 N/mm2 and 0.8% carbon
Calculate the diameter of pin from shear consideration with maximum shear stress allowed is 40NN/mm
Q10
a) 39mm
c) 49mm
A knuckle joint is also called socket pin joint.
Q11
a) True
A knuckle joint can be used in valve mechanism of a reciprocating engine.
Q12
a) Yes
L'S
ES, AURANGABAD
G DEPARTMENT
n-I
ment-I
Marks=10*1 = 10
d) All of three
b) plain carbon steel with 0.35 to 0.45% carbon and 0.7to 0.9%
manganese
b) 1 in 8
d) 1 in 48
b) universal joint
d) key joint
b) False
b) No
M.S.P.MANDAL'S
DEOGIRI INSTITUTE OF ENGINEERING AND MANAGEMENT
MECHANICAL ENGINEERING DEPARTM
Machine Design-I
Continuous Assessment-I
Note:- Solve any Ten
Ergonomics’ is related to human
c) Safety
What does ISO mean?
Q.2 a) International Standards Organization
c)International Organization of Standards
The mechanical properties of good product material are
Q.3 a) strength
b) Comfort
d) ductility
(b) 1 in 32 to 1 in 24
(d) 1 in 24 to 1 in 20
_____ rods.
b) Co-axial
d) None of these
nnected using a knuckle joint?
b) 2
d) 5
e of pin in fork, then determine the diameter of knuckle pin when 50kN
allowable compressive stress=25N/mm², thickness of each eye of
b) 50mm
d) 70mm
on is permitted between the rods joined by the cotter. It is capable of
b) Twisting moment
(d) only compressive axial load
s of knuckle joint?
b) Pin
d) Each of the mentioned
10
If knuckle joint is to fail by crushing failure of pin in fork, then determine the dia
a) 40mm
b) 50mm
c) 60mm
d) 70mm
View Answer
Answer: a
Explanation: d=P/2aσ = 40mm.
o fail by crushing failure of pin in fork, then determine the diameter of knuckle pin when 50kN axial tensile force act on rods