Académique Documents
Professionnel Documents
Culture Documents
BIKE TRAILER
by UKKM on September 22, 2011
Table of Contents
BIKE TRAILER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Related Instructables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
http://www.instructables.com/id/BIKE-TRAILER-4/
Intro: BIKE TRAILER
This is a bike trailer I made for my kids from an old go-kart , and a section from a weights bench.
http://www.instructables.com/id/BIKE-TRAILER-4/
Step 3: Bolting to bike
The steering bar which was removed earlier was cut and welded to the weights bench part.
http://www.instructables.com/id/BIKE-TRAILER-4/
Step 4: Paint -footrests- seat base
I painted and laquered the frame red,added some stunt pegs for feet rests and attached a base for different seats etc using a pice of inch plywood , also stapled some
pvc to the wood as it looked neater than painting the wood.
http://www.instructables.com/id/BIKE-TRAILER-4/
Step 6: Quick release bolt for bike wheel
I made this quick release bolt by welding the nut from the bike axle into an old wheel brace and cutting the brace down so it was big eneogh to release by hand and small
eneogh not to get in the way.
Related Instructables
Easy Bike
teardrop Building a A bike trailer? PVC Bike trailer
trailer's by the strong flexible That's unheard Trailer Hitch by
(Photos) by No
bicycle surgeon bicycle trailer of! by MN218 Weld Bike frenzy
OddJob
(Photos) by coupler. by Trailer by frenzy
thunderbolts weblar
http://www.instructables.com/id/BIKE-TRAILER-4/