Académique Documents
Professionnel Documents
Culture Documents
>
>
1375 km reach on 25 dB segments
Support for segment losses of up
additional control loop, allowing the system
to 35 dB using either mid-stage
loss borrowing or Raman
to pre-compensate for spectral tilt and ripple.
amplification to address a
range of network-specific With these hardware and software features, the 4200’s transport capability can
design requirements
be extended up to 1600 kilometers without regeneration.
> rovides choice of constant or
P
variable-gain modules to meet
The OAs are available in fixed- and variable-gain versions. The OAF-BC-HP
network requirements fixed-gain amplifier provides 14 and 17 dB gain with 20 dBm output, and the
OAV-VS-HP variable-gain amplifier provides 25 dB gain with 20 dBm output.
> eatures variable-gain OA, which
F
compensates for span loss, to mitigate Both versions provide:
the effects of aging spans > Ciena’s SmartGain™ control circuitry to maintain a constant gain across the transport
> uppresses transients to protect
S spectrum regardless of input power
services and receivers, and simplifies > Span loss compensation to mitigate the effects of aging spans by dynamically
channel count changes with
SmartGain dynamic gain control adjusting the gain of a span-receive amplifier and offset increased loss
> Auto Power Shut Down (APSD)
> djusts the amplifier automatically,
A
reducing Operating Expenses (OPEX) > Remote and local management
when waves are added
> Autonomous alarms and Threshold Crossing Alerts (TCAs)
> onnects to external test equipment
C > Input/output power histories
through DWDM monitoring ports
> Optical Channel Monitor (OCM) input/output ports
35 db/1600 Km
Figure 1. 4200 can provide unrepeated transport up to 1600 Km using high gain
amplification, including Raman.
D Datasheet
In addition, the OAV-VS-HP provides mid-stage access for with the existing auto channel power control and span loss
the external Dispersion Compensation Module (DCM) and compensation features. Architecturally, the OAs are ready
mid-stage loss borrowing for extended reach up to 35 dB on to support both 50 GHz channel plans and 40G transport.
qualifying spans without the need for the Raman. It also offers
an integrated Optical Supervisory Channel (OSC) for out-of- The Raman provides distributed amplification of the payload
band node management, and acts as the system controller signal—and to a lesser extent, the OSC channel—by pumping
when installed in the 4200 or 4200 MC main slot. The 4200 the transmission fiber to increase the power of the 1550-band
OAs amplify the entire C-band Dense Wavelength Division payload. The Raman wavelengths inject up to 27 dBm
Multiplexing (DWDM) channel plan. (500 mW) of optical power and are transmitted counter-
propagating to the signal path. Additionally, the Raman
The modules are functionally compatible with existing fixed- provides 8 to 10 dB of Raman fiber gain, depending on fiber
filter Optical Add/Drop Multiplexers (OADMs), VMUX OADMs, type and span loss, and is designed to operate at maximum,
and the Reconfigurable OADM (ROADM)1. In addition, the or best-effort, gain. The Raman is compatible with Non-
OAs are physically compatible with the existing 4200, 4200 MC, Dispersion Shifted Fiber (NDSF), ELEAF, TW, TW-C, LS
and 4200 RS form factor chassis, and functionally compatible and Dispersion Shifted Fiber (DSF) fiber types.
Technical Information
System Requirements
4200, 4200 MC, 4200 RS Chassis Software release 6.0 or later (release 6.1 for Raman)
Port Format
OAF-BC-HP:
6 optical OA inputs 3 express (EXPR-IN 1 through 3)
2 add connections (ADD-IN 1 and 2)
1 expansion connection (EXPAND)
1 optical OA output (OUT)
OAV-VS-HP
8 optical ports 2 network ports (NTWK IN/NTWK OUT)
2 node ports (NODE IN/NODE OUT)
2 DCM connection ports (DCM IN/DCM OUT)
2 OCM connection ports (OCM OUT T/R)
Raman
2 optical ports 1 port (Rx) in
1 port (Tx) out
Power Requirements
OAF-BC-HP 18 W
OAV-VS-HP 22 W
Raman 82.5 W
Agency Approvals
ETSI/CE ETS 300 019/IEC 68, EN 300 386/EN 55022, EN 61000, ETS 300 753, EN 60950
NEBS GR-63, GR-1089
Safety Listed to UL 60950-1, 3rd Edition; Certified to CSA C22.2 No. 60950-1 3rd Edition; FCC,
Subpart B, Part 15, Class A; Industry Canada ICES-0003, Class A
Environmental Characteristics
Operating Temperature +41ºF to +122ºF (+5ºC to +50ºC)
+23ºF to +131ºF (-5ºC to +55ºC) short term
Relative Humidity +5% to +85% (non-condensing)
Altitute 13,000 ft; 4000 m
1
See separate data sheets for Common Optical Filters, VMUX Modules, and 4200 ROADM.
2
Technical Information continued
Physical Characteristics
OAF-BC-HP and OAV-VS-HP
Dimensions 10.94” (H) x 0.98” (W) x 9.63” (D)
278 mm (H) x 25 mm (W) x 245 mm (D)
Weight 1.8 lbs; 0.82 kg
Optical Specifications
OAF-BC-HP Optical Specifications
Parameter Minimum Typical Maximum
Wavelength range (nm) 1529.55 1565.5
Input power range, through port (dBm)* -15 9
Input power range, add port (dBm)* -21 3
Maximum output power (dBm) 20.5
Gain, through port (including connectors) (dB) (across wavelength, power and temperature) 10.5 11 11.5
Gain, add port (including connectors) (dB) (across wavelength, power and temperature) 16.5 17 17.5
Ciena may from time to time make changes to the products or specifications contained herein without notice. Copyright © 2011 Ciena® Corporation. All rights reserved. DS134 10.2011