Académique Documents
Professionnel Documents
Culture Documents
Primary Beams
Consult our Engineering Department for assistance in the application of these accessories. Illustrations and photos are not to scale. All dimensions nominal.
Weight Size Aluma Dek Aluma Systems
Item No. 7857 52 lbs 8’ Product Sheet DEK_01_09.05 Concrete Construction
23 kg 2351.8mm
Item No. 7855 37 lbs 6’
16.6 kg 1742.2mm
Item No. 7853 25lbs 4’
11.2 kg 1132.6mm
The Aluma Dek®: The Cutting Edge of Productivity
Panels Introduction
©2009 Brand Services, LLC All Rights Reserved. Aluma Systems is a Brand Services company
customer expectations by reducing costs and
improving productivity, safety and efficiency.
can support a 14-inch slab and a 6’ X 8’
It has done so with consistency and an grid using half the components required
uncompromising determination to continually by competing systems.
build on the best.
www.aluma.com
SYSTEM FEATURES SYSTEM COMPONENTS
Flexible and Versatile * Note: Equipment shown is for demonstration purposes only
2. Primary Beams & In-Fill Supports 3. Panels & In-Fill Supports 4. Adjustable Quick Brace Frame
Primary beams, in 4’, 6’ and 8’ lengths and Panels, in lengths of 4’ and 6’ and widths of The Adjustable Quick Brace Frame for post
easy to use beam side in-fill supports in 4’, 6’ 1’, 1’81/2” and 2’ and easy to use panel side shores reduces labor costs and enhances
and 8’ lengths make finishing areas a snap. in-fill supports in 4’ and 6’. Limit Stops bolt safety and efficiency by providing lateral
into place at the bottom of beams, beneath stability to the system, without time-
the panels. This prevents sliding, particularly consuming brace construction. The frame’s
critical in the case of a steeply sloping slab. adjustable legs are designed to easily adapt
to sloping slabs.
The Aluma Dek® has a strong advantage The Aluma Dek’s® primary beams are The Aluma Dek® is one of the only systems
over other available systems because its grid uniquely designed to connect to the system’s available that can be used efficiently with
direction can be quickly changed at any steel drop heads as well as to each other. either panels or beams. This feature allows
point, making it easily adaptable to any Panels can therefore be positioned anywhere customers who own an inventory of Aluma 5. Steel Drophead 6. Hanging Bracket 7. Tripod
building configuration. relative to the primary beams, allowing Beam® the option of using them in place
The easily engaged/released drop head with The Aluma Hanging Bracket, unique to The Tripod erection aid easily collapses for
contractors to run beams in an uninterrupted of panels. In this lightweight, economical
rotating block fits on the top of all vertical the Aluma Dek® system, offers various transport and storage.
path without having to stop and start the configuration, Aluma Beam®can be cut to
posts and, when released, lowers the frame level brackets for column drops and allows
erection process. size, modified by adding the contact heads,
and allows quick removal of braces, primary production to proceed efficiently, without the
hung as secondary beams and topped by
beams and panels while post shores continue need to stop for measurements. Designed to
plywood.
to support the setting concrete. (Allows 4 ½” be used with the Aluma Beam®.
stripping drop.)