Académique Documents
Professionnel Documents
Culture Documents
x
Installation manual
contents
1. Prepare............................................................................................................................................... 1
1.1 Hardware requirements......................................................................................................... 1
1.2 Hardware requirements......................................................................................................... 1
2. Installation step..................................................................................................................................2
Redhat Enterprise 6.x installation
1. Prepare
-1-
2. Installation steps
Ether machine’s BIOS setting, choose to use CD-ROM priority, reboot machine after put CD into
optical drive.
When following interface appears, choose 【Install or upgrade an existing system】 and press
enter
-2-
Choose 【skip】 to skip the media test and start the installation
Click 【Next】
-3-
Choose language , here choose 【English】,click 【Next】
-4-
Select the appropriate keyboard for the system, here choose【U.S.English】in default, click【next】
-5-
Set hostname that identifies the computer on a network, click 【 Configure Network 】 to set ip
details.
-6-
Choose the recognized network interface , click 【Edit】 to set ip details
Pay attention to the following shortsccreen involves some necessary settings
1) Don’t forget to check 【Connect automatically】
2) Method: choose 【Manual】
3) IPv4 settings, Click 【Add】 to set Address,Network mask, Gateway
4) Click 【Apply】 to bring setting into effect
5) Click 【close】 to exit ip setting, click 【Next】 to continue the installation
-7-
Select the nearest city in your time zone , click 【Next】
Notes: don’t check 【System clock uses UTC】
System will give prompts if the root passwd is simple, you can choose 【Use Anyway】 to continue
-8-
installation
-9-
Choose 【Minimal】, click 【Customize now】, click 【Next】
- 10 -
Chosoe 【Base】 and right click to choose 【Deselect all optional packages】
- 11 -
Choose 【Servers】and check 【E-mail server】, click 【Next】
- 12 -
Finally , click 【Reboot】
- 13 -