Académique Documents
Professionnel Documents
Culture Documents
Sika® InjectoCem®-190
MICRO CEMENT INJECTION GROUT
PRODUCT INFORMATION
Chemical Base Modified micro cement
Packaging Part A: 2 bags each containing 2.5 kg powder
Part B: Pail of 3.25 kg liquid
Pre-batched units of 8.25 kg (Part A+B)
Both parts packed in plastic pail.
Colour Part A: in powder form as a micro cement
Part B: in liquid form with corrosion inhibitors
Shelf Life 12 months from date of production if stored in unopened, undamaged and
sealed original packaging
Storage Conditions Store in dry conditions at temperatures between +5 °C and +30 °C.
1/3
Viscosity ~100 MPa.s (at +20°C)
TECHNICAL INFORMATION
Expansion Shrinkage:
Dry storage: ~4.5 ‰
Wet storage: ~0.25 ‰
Compressive Strength After 1 day: ~40 N/mm²
After 7 days: ~44 N/mm²
After 28 days: ~47 N/mm²
APPLICATION INFORMATION
Mixing Ratio Sika® InjectoCem®-190 is supplied in pre-batched units and should only
be mixed and applied in these. Do not part batch.
Mixing ratio A : B = 1 : 0.65 parts by weight
(if required max. 0.2 l water may be added).
Ambient Air Temperature +5 °C min. / +35 °C max
Substrate Temperature +5 °C min. / +35 °C max
Substrate Moisture Content Normally concrete is “Damp”.
If it is dry, flush relevant area of concrete firstly with water.
Yield Pre-batched units of 8.25 kg produce approx 5 litres of injection grout.
2/3
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
3/3