Académique Documents
Professionnel Documents
Culture Documents
These problems need to be submitted as one pdf. Scanned handwritten notes are fine, but must be
legible. You do not have to use equation editor.
Question 1 (10pts):
The circuit below does not give 5 volts on Vout as expected. Explain what I have done wrong.
To find out what I have done wrong you have to read the data sheet and check to make sure I have se
the circuit up properly. Of course the first thing to check in to see if R1 and R2 are correct. This kind of
problem in which you have to de-bug a circuit that you have little experience with by reading the
datasheet is a realistic exercise.
To see if your solution to the problem is correct, down load the circuit in LTspice, fix the problem and
run the simulation and see if the problem has been resolved. You do not have to include your LTspice
results. No “fancy” documentation required.
To see if your solution to the problem is correct, down load the circuit in LTspice, fix the problem and
run the simulation and see if the problem has been resolved. You do not have to include your LTspice
results. No “fancy” documentation required.
There is only one equation but two unknowns. You have to choose a “reasonable” value of V1 to get a
“reasonable” (R1>50Ω).