Académique Documents
Professionnel Documents
Culture Documents
PRODUCT DESCRIPTION:
Ceram-Kote 54®S is a two pack ceramic composite epoxy coating providing excellent abrasion and corrosion protection to a wide
variety of metal, fibreglass, reinforced plastic, concrete substrates in aggressive environments. The product has Norsok M501 approval
for systems 1,3 & 7, Germanischer Lloyds & DNV certification.
TECHNICAL INFORMATION:
Colour: Ral colours
Volume Solids: 80% (+/-2%)
Flash Point: > 17°C
VOC: (180 g/litre) less water
Flexibility: Excellent > 18% (ASTM D 922)
Gloss: Semi gloss
Water resistance: Excellent >4000 hours seawater immersion test
Corrosion resistance: Excellent >6000 hours salt spray (ISO 7253)
Chemical resistance: Very good contact distributor for specific information
Abrasion resistance: Excellent 9,8 mg loss (ASTM D4060)
Adhesion: Excellent >30 N/mm2 (ISO 4624)
Specific Gravity mix: 1,86
Application range:
Film thickness per coat Theoretical spreading rate m2/l
Dry Wet
200µm 2 x 125µm 4,0
300µm 3 x 125µm 2,67
APPLICATION DATA:
Application methods: Airless spray. Tip size: 0,015-0,021”
Conventional spray or roller may be used for smaller areas. Brush may be used for strips
coating and touch-up.
Mixing Ratio by volume: 11 parts A (base) to be mixed thoroughly with 1 part B (hardener)
Mixing Ratio by weight: 19 parts A (base) to be mixed thoroughly with 1 part B (hardener)
Pot life (23°C) 3 hours (reduced at higher temperatures)
Thinner: Ceram Kote Thinners . Max diluition 5 % volume.
Filters: Check to ensure that filters are clean. Utilise a 60 mesh/200 micron filter
SURFACE PREPARATION:
Gritblasting to minimum Sa 2,5 (ISO 8501-1).Surface to have a good profile with a roughness of 50-80µm.
Contact Distributor for specific information regarding other substrates.
DRYING TIME:
Ambient Gel Services Cured Recoat
temperature
Minimum Maximum
23 °C 3h 12 h 48 h 0,5 h -
Protech Srl ● Via A. Fortis,15 ● 48100 Ravenna ● Tel:+39-0544-453526 ● Fax + 39-0544-455558 ● www.ceramkote.it