Académique Documents
Professionnel Documents
Culture Documents
technical data
CR 1s 24
CRI, CRN 1s 26
CR, CRE 1 28
CRI, CRN, CRIE, CRNE 1 30
CR, CRE 3 32
CRI, CRN, CRIE, CRNE 3 34
CR, CRE 5 36
CRI, CRN, CRIE, CRNE 5 38
CR, CRE 10 40
CRI, CRN, CRIE, CRNE 10 42
CR, CRE 15 44
CRI, CRN, CRIE, CRNE 15 46
2
Product data CR, CRI, CRN,
CRE, CRIE, CRNE
This data booklet deals with CR, CRI and CRN as well
as CRE, CRIE and CRNE pumps.
CR, CRI, CRN The difference between the CR and the CRE pump
CR, CRI and CRN pumps are vertical multistage centrif- range is the motor. CRE, CRIE and CRNE pumps are
ugal pumps. The in-line design enables the pump to be fitted with an E-motor, i.e. a motor with built-in fre-
installed in a horizontal one-pipe system where the suc- quency control.
tion and discharge ports are in the same horizontal The CRE pump motor is a Grundfos MGE or MMGE
plane and have the same pipe dimensions. This design motor designed to EN standards.
provides a more compact pump design and pipework.
Frequency control enables continuously variable con-
Grundfos CR pumps are available in various sizes and trol of motor speed, which makes it possible to set the
various numbers of stages to provide the flow and pres- pump to operation at any duty point. The aim of contin-
sure required. uously variable control of the motor speed is to adjust
CR pumps are designed for a variety of applications the performance to a given requirement.
from the pumping of potable water to the pumping of CRE, CRIE and CRNE pumps are available with an
chemicals. The pumps are therefore suitable for a wide integrated pressure sensor connected to the frequency
diversity of pumping systems where the performance control.
and material of the pump meet specific demands.
The pump materials are identical to those of the CR,
The CR pumps consist of two main components: The CRI and CRN pump range.
motor and the pump unit. The CR pump motor is a
Grundfos motor designed to EN standards. Selecting a CRE pump
Select a CRE pump if the following features are
The pump unit consists of optimised hydraulics, various
required:
types of connections, an outer sleeve, a pump head
and various other parts. • Controlled operation, i.e. consumption fluctuates
CR pumps are available in various material versions • Constant pressure
according to the pumped liquid. • Communication with the pump.
Adaptation of performance through frequency-control-
led speed control offers obvious benefits such as:
• energy savings
• increased comfort
• control and monitoring of the pump performance.
3
Product data CR, CRI, CRN,
CRE, CRIE, CRNE
300
CR 32
200 CRN 32
CR 150
CRN 150
CR 120
CRN 120
100
80 CR 1s CR 3 CR 10 CR 20 CR 64
CRI 1s CRI 3 CRI 10 CRI 20 CRN 64
60
CRN 1s CRN 3 CRN 10 CRN 20
CR 1 CR 5 CR 15 CR 45 CR 90
40 CRI 1 CRI 5 CRI 15 CRN 45 CRN 90
CRN 1 CRN 5 CRN 15
30
20
0.8
1 1 2 3 4 5 6 8 10 20 30 40 50 60 80 100 200
Eta Q [m³/h]
[%]
80
60
40
0
0.8
1 1 2 3 4 5 6 8 10 20 30 40 50 60 80 100 200
High pressure range Q [m³/h]
200
100
80
CRE 1 CRE 5 CRE 15 CRE 32 CRE 64
30
TM02 7281 3605
20
0.8
1 1 2 3 4 5 6 8 10 20 30 40 50 60 80 100 Q [m³/h]
4
Product data CR, CRI, CRN,
CRE, CRIE, CRNE
Applications
Application CR, CRI CRN CRE, CRNE
Water supply
Filtration and transfer at waterworks z z
Distribution from waterworks z z
Pressure boosting in mains z z
Pressure boosting in high-rise buildings, hotels, etc. z z
Pressure boosting for industrial water supply z z
Industry
Pressure boosting
Process-water systems z z z
Washing and cleaning systems z z
Vehicle-washing tunnels z z
Fire-fighting systems z
Liquid transfer
Cooling and air-conditioning systems (refrigerants) z z
Boiler-feed and condensate systems z z
Machine tools (cooling lubricants) z z z
Aquafarming z
Special transfer duties
Oils and alcohols z z
Acids and alkalis z
Glycol and coolants z
Water treatment
Ultra-filtration systems z
Reverse-osmosis systems z
Softening, ionising, demineralising systems z
Distillation systems z
Separators z z z
Swimming baths z
Irrigation
Field irrigation (flooding) z
Sprinkler irrigation z z
Drip-feed irrigation z
z Recommended version.
Alternative version.
CRT, CRTE version available.
For further information about CRT, CRTE pumps, see "Pumped liquids", page 78, or related CRT, CRTE data booklet.
5
Product data CR, CRI, CRN,
CRE, CRIE, CRNE
Product range
CR, CR, CR, CR, CR, CR,
Range CR 1s
CRE 1 CRE 3 CRE 5 CRE 10 CRE 15 CRE 20
Nominal flow rate [m3/h] 0.8 1 3 5 10 15 20
Temperature range [°C] –20 to +120
Temperature range [°C] – on request –40 to +180
Max. pump efficiency [%] 35 48 58 66 70 72 72
CR pumps
Flow range [m3/h] 0.3-1.1 0.7-2.4 1.2-4.5 2.5-8.5 5-13 9-24 11-29
Max. pressure [bar] 21 22 24 24 22 23 25
High pressure [bar] – on request - 47 41 47 44 47 48
Motor power [kW] 0.37-1.1 0.37-2.2 0.37-3 0.37-5.5 0.37-7.5 1.1-15 1.1-18.5
CRE pumps
Flow range [m3/h] - 0.7-2.4 1.2-4.5 2.5-8.5 5-13 8.5-23.5 10.5-29
Max. pressure [bar] - 22 24 24 22 23 25
Motor power [kW] - 0.37-2.2 0.37-3 0.37-5.5 0.37-7.5 1.1-15 1.1-18.5
Version
CR, CRE:
Cast iron and stainless steel z z z z z z z
EN 1.4301/AISI 304
CRI, CRIE:
Stainless steel z z z z z z z
EN 1.4301/AISI 304
CRN, CRNE:
Stainless steel z z z z z z z
EN 1.4401/AISI 316
CRT, CRTE:
See the CRT, CRTE data booklet.
Titanium
CR, CRE pipe connection
Oval flange (BSP) Rp 1 Rp 1 Rp 1 Rp 1¼ Rp 1½ Rp 2 Rp 2
Rp 1¼
Oval flange (BSP) on request Rp 1¼ Rp 1¼ Rp 1¼ Rp 1 Rp 2½ Rp 2½
Rp 2
DN 25/ DN 25/ DN 25/ DN 25/
Flange DN 40 DN 50 DN 50
DN 32 DN 32 DN 32 DN 32
Flange on request - - - - DN 50 - -
CRI, CRIE pipe connection
Oval flange (BSP) Rp 1 Rp 1 Rp 1¼ Rp 1¼ Rp 1½ Rp 2 Rp 2
Oval flange (BSP) on request Rp 1¼ Rp 1¼ Rp 1 Rp 1 Rp 2 - -
DN 25/ DN 25/ DN 25/ DN 25/
Flange DN 40 DN 50 DN 50
DN 32 DN 32 DN 32 DN 32
Flange on request - - - - DN 50 - -
R 1¼ R 1¼ R 1¼ R 1¼ R2 R2 R2
PJE coupling (Victaulic)
DN 32 DN 32 DN 32 DN 32 DN 50 DN 50 DN 50
Clamp coupling (L-coupling) Ø48.3 Ø48.3 Ø48.3 Ø48.3 Ø60.3 Ø60.3 Ø60.3
Union (+GF+) G2 G2 G2 G2 G 2¾ G 2¾ G 2¾
CRN(E) pipe connection
Oval flange (BSP) Rp 1 Rp 1 Rp 1¼ Rp 1¼ Rp 1½ Rp 2 Rp 2
Oval flange (BSP) on request Rp 1¼ Rp 1¼ Rp 1 Rp 1 Rp 2 - -
DN 25/ DN 25/ DN 25/ DN 25/
Flange DN 40 DN 50 DN 50
DN 32 DN 32 DN 32 DN 32
Flange on request - - - - DN 50 - -
R 1¼ R 1¼ R 1¼ R 1¼ R2 R2 R2
PJE coupling (Victaulic)
DN 32 DN 32 DN 32 DN 32 DN 50 DN 50 DN 50
Clamp coupling (L-coupling) Ø48.3 Ø48.3 Ø48.3 Ø48.3 Ø60.3 Ø60.3 Ø60.3
Union (+GF+) G2 G2 G2 G2 G 2¾ G 2¾ G 2¾
6
Product data CR, CRI, CRN,
CRE, CRIE, CRNE
7
Product data CR, CRI, CRN,
CRE, CRIE, CRNE
MG motor
Up to 4 kW: V 18
Mounting designation
From 5.5 kW: V 1
Motor Insulation class F
EFF 1
Efficiency class
(0.37-0.75 kW pumps are EFF 2)
Coupling Enclosure class IP 55
P2: 0.37-1.5 kW:
3 x 220-240/380-415 V
8
Product data CR, CRI, CRN,
CRE, CRIE, CRNE
60
Viscosity
The pumping of liquids with densities or kinematic vis-
cosities higher than those of water will cause a consid-
erable pressure drop, a drop in the hydraulic
performance and a rise in the power consumption.
In such situations the pump should be equipped with a
larger motor. If in doubt, contact Grundfos.
9
Control of E-pumps CR, CRI, CRN,
CRE, CRIE, CRNE
E-pumps in the service of industry By using an E-pump with level sensor in the boiler, it is
possible to maintain a constant water level.
Industry uses a large number of pumps in many differ-
ent applications. Demands on pumps in terms of pump A constant water level ensures optimum and cost-effi-
performance and mode of operation make speed con- cient operation as a result of a stable steam production.
trol a must in many applications.
Dosing applications
Below is listed some of the applications in which E- • chemical industry (i.e. control of pH-values)
pumps are often used.
• petrochemical industry
Constant pressure • paint industry
• water supply • degreasing systems
• washing and cleaning systems • bleaching systems, etc.
• distribution from waterworks Example: In the petrochemical industry, E-pumps with
• humidifying systems pressure sensor are used as dosing pumps. The E-
• water treatment systems pumps helps to ensure that the correct mixture ratio is
achieved when more liquids are combined.
• process boosting systems, etc.
Example: Within industrial water supply, E-pumps with E-pumps functioning as dosing pumps improves
integrated pressure sensor are used to ensure a con- processing and offer energy-savings.
stant pressure in the piping network. From the sensor,
E-pumps in commercial building services
the E-pump receives inputs about changes of pressure
Commercial building services use E-pumps to maintain
as a result of changes in the consumption. The E-pump
a constant pressure or a constant temperature based
responds to the input by adjusting the speed until the
on a variable flow.
pressure is equalized. The constant pressure is stabi-
lized once more on the basis of a preset setpoint. Constant pressure
Water supply in high-rise buildings such as office build-
Constant temperature
ings and hotels.
• air-conditioning systems at industrial plants
• industrial cooling systems Example: E-pumps with pressure sensor are used for
water supply in high-rise buildings to ensure a constant
• industrial freezing systems
pressure even at the highest draw-off point. As the con-
• casting and moulding tools, etc.
sumption pattern and thus the pressure changes during
Example: In industrial freezing systems, E-pumps with the day, the E-pump continuously adapts its perform-
temperature sensor increase comfort and lower operat- ance until the pressure is equalized.
ing costs compared with pumps without a temperature
sensor. Constant temperature
• air-conditioning systems in hotels, schools, etc.
An E-pump continuously adapts its performance to the
changing demands reflected in the differences in tem- • building cooling systems, etc.
perature of the liquid circulating in the freezing system. Example: E-pumps are an excellent choice for build-
Thus, the lower the demand for cooling, the smaller the ings where constant temperature is essential. E-pumps
quantity of liquid circulated in the system and vice keep the temperature constant in air-conditioned high-
versa. rise glass buildings, irrespective of the seasonal fluctu-
ations of the outdoor temperature and various heat
impacts inside the building.
10
Control of E-pumps CR, CRI, CRN,
CRE, CRIE, CRNE
Control panel
Control manage- The control panel of the E-pump terminal box makes it
ment system
possible to change the setpoint settings manually.
Light fields
LON connection
LON Interface,
e.g. G10 or G100
Indicator lights
GENIbus connection
TM02 6592 1404
E-pump
11
Control of E-pumps CR, CRI, CRN,
CRE, CRIE, CRNE
Control modes for E-pumps In constant-curve mode, the pump is not controlled. It
can be set to pump according to a preset pump charac-
Grundfos offers CRE, CRIE and CRNE pumps in two
teristic within the range from min. curve to max. curve,
different variants:
see figure below.
• CRE, CRIE and CRNE with integrated pressure
sensor H
• CRE, CRIE and CRNE without sensor.
Max.
H
Max.
Min.
Hset
TM00 9322 4796
12
Construction CR, CRI, CRN,
CRE, CRIE, CRNE
1 1
3 3
10
2 10
4 6
7 4
5
5 6
7
9
8 11
Pos. Designation Materials EN/DIN AISI/ASTM Pos. Designation Materials EN/DIN AISI/ASTM
Cast iron Cast iron
1 Pump head EN-JL1030 ASTM 25B
1 Pump head
EN-GJL-200
EN-JL1030 ASTM 25B EN-GJL-200 1)
Pump head CF 8M
1.4401 1) AISI 316 2 Stainless steel 1.4408
3 Shaft Stainless steel cover equal to AISI 316
1.4057 2) AISI 431
1.4401 2) AISI 316
4 Impeller Stainless steel 1.4301 AISI 304 3 Shaft Stainless steel
1.4460 3) AISI 329
5 Chamber Stainless steel 1.4301 AISI 304
CF 8M
6 Outer sleeve Stainless steel 1.4301 AISI 304 8 Base Stainless steel 1.4408
equal to AISI 316
O-ring for 9 Neck ring PTFE
7 EPDM or FKM
outer sleeve
10 Shaft seal Cartridge type
Cast iron
8 Base EN-JL1030 ASTM 25B Cast iron
EN-GJL-200 11 Base plate EN-JL1030 ASTM 25B
EN-GJL-200 1)
9 Neck ring PTFE
Rubber parts EPDM or FKM
10 Shaft seal
CRI(E)
Rubber parts EPDM or FKM
4 Impeller Stainless steel 1.4301 AISI 304
1)
CR(E) 1S, 1, 3, 5 5 Chamber Stainless steel 1.4301 AISI 304
2) CR(E) 10, 15, 20
6 Outer sleeve Stainless steel 1.4301 AISI 304
O-ring for
7 EPDM or FKM
outer sleeve
CRN(E)
4 Impeller Stainless steel 1.4401 AISI 316
5 Chamber Stainless steel 1.4401 AISI 316
6 Outer sleeve Stainless steel 1.4401 AISI 316
O-ring for
7 EPDM or FKM
outer sleeve
1)
Stainless steel available on request.
2)
CRI(E), CRN(E) 1S, 1, 3, 5
3) CRI(E), CRN(E) 10, 15, 20
13
Construction CR, CRI, CRN,
CRE, CRIE, CRNE
2 2
3 3
10 10
4 1 4 1
6 5 6 5
11 9 11 9
7 7
8 8
TM01 1836 1403
13
14
Construction CR, CRI, CRN,
CRE, CRIE, CRNE
GrA3732 - GrA3735
GrA3731
Sectional drawing Sectional drawing
TM03 8835 2607
15
Construction CR, CRI, CRN,
CRE, CRIE, CRNE
16
Operating and inlet pressures CR, CRI, CRN,
CRE, CRIE, CRNE
17
Operating and inlet pressures CR, CRI, CRN,
CRE, CRIE, CRNE
18
Selection and sizing CR, CRI, CRN,
CRE, CRIE, CRNE
220
-12-2 Duty
• shaft seal (see page 21). 2.0
200
-11
-11-2 point
-10 (E)
-10-2
180 -9
Duty point of the pump 1.6 160
-9-2
-8 (E)
-8-2
From a duty point it is possible to select a pump on the 140 -7
-7-2
1.2 120
basis of the curve charts shown in "Performance 100
-6 (E)
-6-2
-5
-4-2
60 -3 (E)
-3-2
0.4 40 -2 (E)
-2-2 (E)
p H 20 -1 (E)
-1-1 (E)
[MPa] [m]
280 -14
CR, CRE 32
0.0 0
Best
-14-2
260 -13
50 Hz
ISO 9906 Annex A
0 4 8 12 16 20 24 28 32 36 Q [m³/h] efficiency
-13-2
2.4
240 0 2 4 6 8 10
-12 (E) Q [l/s]
-12-2 P2 P2 Eta
220
-11 [hp] [kW] [%]
-11-2 2.0 Eta 80
2.0
200 -10 (E) 2.4 P2 1/1
-10-2 1.5 60
P2 2/3
180 1.6
-9 1.0 40
-9-2
1.6 160 0.8
-8 (E) 0.5 20
-8-2
140 0.0 0.0 0
-7
-7-2 0 4 8 12 16 20 24 28 32 36 Q [m³/h]
0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
Fig. 16 Example of a CR pump’s duty point
0 2 4 6 8 10 Q [l/s]
P2 P2 Eta
[hp] [kW]
2.0 Eta
[%]
80
As the pump is sized on the basis of the highest possi-
2.4 P2 1/1
1.6
1.5
1.0
P2 2/3
60
40
ble flow, it is important always to have the duty point to
0.8
0.0
0.5
0.0
20
0
the right on the efficiency curve (eta) in order to keep
p
[kPa]
H
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
NPSH efficiency high when the flow drops.
[m] [m]
TM02 7302 3103
Eta
40
0 0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
TM00 9190 1303
Dimensional data
When sizing a pump, take the following factors into Q [ m3 /h ]
account:
Fig. 17 Best efficiency
• Required flow and pressure at the draw-off point.
• Pressure loss as a result of height differences
(Hgeo).
• Friction loss in the pipework (Hf).
Hf Required flow,
It may be necessary to account for pressure loss in required pressure
connection with long pipes, bends or valves, etc.
• Best efficiency at the estimated duty point.
TM02 6711 1403
19
Selection and sizing CR, CRI, CRN,
CRE, CRIE, CRNE
H Q
[m] Qx Qn
P
Max. curve
nn Pn ⎛ n n⎞ 3
Pn ------- = ⎜ ------⎟
P
x ⎝ n x⎠
nx
Px
20
Selection and sizing CR, CRI, CRN,
CRE, CRIE, CRNE
Pump material
Select the material variant (CR(E), CRI(E), CRN(E)) on
the basis of the liquid to be pumped. The product range
covers the following three basic types.
• CR(E), CRI(E)
Use CR(E), CRI(E) pumps for clean, non-
aggressive liquids such as potable water and oils.
Shaft seal
As standard, the CR(E) range is fitted with a Grundfos
shaft seal (cartridge type) suitable for the most common
applications.
21
Selection and sizing CR, CRI, CRN,
CRE, CRIE, CRNE
150
• Water is drawn through long pipes. 45
40
140 35
• Inlet conditions are poor. H 30
Pb NPSH 130
25
To avoid cavitation, make sure that there is a minimum
120 20
pressure on the suction side of the pump. The maxi-
110 15
mum suction lift "H" in metres head can be calculated Hv 12
100 10
as follows: 8,0
90
6,0
H = pb x 10.2 – NPSH – Hf – Hv – Hs 80 5,0
4,0
pb = Barometric pressure in bar. 70 3,0
22
Selection and sizing CR, CRI, CRN,
CRE, CRIE, CRNE
0.0 0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
p H NPSH
[kPa] [m] [m]
200 20 QH 2900 rpm 1/1 8 The NPSH curve is an average
160 QH 2900 rpm 2/3 NPSH
15 6 curve for all the variants shown.
120
80
10 4 When sizing the pumps, add a
40 5 2 safety margin of at least 0.5 m.
0 0 0
QH curve for each individual impeller. Curves for complete (1/1) and reduced-diameter (2/3) impellers are shown.
10
be used at a flow below the minimum flow rate.
0
• The QH curves apply to a rated motor speed of
40 60 80 100 120 140 160 180 t [°C]
2900 min-1. All curves are based on current motor
speeds.
Fig. 27 Minimum flow rate
23
Performance curves/ CR 1 s
technical data
CR 1s
p H
[kPa] [m]
CR 1s
220
50 Hz
-36 ISO 9906 Annex A
2000
200
-33
180
-30
1600
160 -27
-25
140
-23
1200 -21
120
-19
100 -17
-15
800 80
-13
-12
-11
60 -10
-9
-8
400 40 -7
-6
-5
-4
20 -3
-2
0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
40 4 4
20 2 NPSH 2
TM02 7424 3605
0 0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
24
Technical data CR 1 s
Dimensional sketch
D2
D1
B2
G 1/2 G 1/2
FGJ (DIN-ANSI-JIS)
A (Oval)
B1
PN 25 / DN 25/32
G 1/2 19 x 24.5
G 1/2 Rp 1
22 M10 x 40
ø100
ø140
ø89
50
20
20
25
Performance curves CRI, CRN 1s
CRI, CRN 1s
p H
[kPa] [m]
CRI, CRN 1s
220
50 Hz
-36 ISO 9906 Annex A
2000
200
-33
180
-30
1600
160 -27
-25
140
-23
1200 -21
120
-19
100 -17
-15
800 80
-13
-12
-11
60 -10
-9
-8
400 40 -7
-6
-5
-4
20 -3
-2
0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
40 4 4
20 2 NPSH 2
TM02 7425 3605
0 0 0
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
26
Technical data CRI, CRN 1s
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2
FGJ (DIN-ANSI-JIS)
B1
ø14 19 x 27
G 1/2 4 x ø13
ø105
ø140
ø89
50
ø42.2
250
22
34
22
27
Performance curves CR, CRE 1
CR, CRE 1
p H
[kPa] [m]
CR, CRE 1
220 -36 (E)
50 Hz
2000 -33 ISO 9906 Annex A
200
-30 (E)
180
-27
1600
160
-25
-21
1200 120
-19 (E)
-17
100
-15 (E)
800 80 -13
-12
-11 (E)
60 -10
-9
-8
400 40 -7 (E)
-6
-5
-4
20 -3 (E)
-2
0 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
0.00 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
H NPSH
[m] [m]
QH 2900 rpm
6 4
3 2
TM02 7290 3605
NPSH
0 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
28
Technical data CR, CRE 1
Dimensional sketch
D2
D1
B2
G 1/2 G 1/2
FGJ (DIN-ANSI-JIS)
A (Oval)
B1
PN 25 / DN 25/32
G 1/2 19 x 24.5
G 1/2 Rp 1
22 M10 x 40
ø100
ø140
ø89
75
20
20
29
Performance curves CRI, CRN, CRIE, CRNE 1
p H
[kPa] [m]
CRI, CRN 1
220 -36 (E)
CRIE, CRNE 1
2000 -33
200 50 Hz
ISO 9906 Annex A
-30 (E)
180
-27
1600
160
-25
-21
1200 120
-19 (E)
-17
100
-15 (E)
800 80 -13
-12
-11 (E)
60 -10
-9
-8
400 40 -7 (E)
-6
-5
-4
20 -3 (E)
-2
0 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
0.00 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
H NPSH
[m] [m]
QH 2900 rpm
6 4
3 2
TM02 7291 3605
NPSH
0 0
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 Q [m³/h]
30
Technical data CRI, CRN, CRIE, CRNE 1
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2
FGJ (DIN-ANSI-JIS)
B1
ø14 19 x 27
G 1/2 4 x ø13
ø105
ø140
ø89
50
ø42.2
250
22
34
22
31
Performance curves CR, CRE 3
CR, CRE 3
p H
[kPa] [m]
CR, CRE 3
240 -36 (E)
50 Hz
ISO 9906 Annex A
220
-33
2000 -31
200
-29 (E)
180 -27
1600 -25
160
-23 (E)
140 -21
-19 (E)
1200 120
-17
100 -15 (E)
800 -13
80 -12
-11
-10 (E)
60 -9
-8
-7 (E)
400 40 -6
-5 (E)
-4
20 -3
-2
0 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
0.03 20
0.00 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
H NPSH
[m] QH 2900 rpm [m]
6 3
4 2
NPSH
2 1
TM02 7292 3605
0 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
32
Technical data CR, CRE 3
Dimensional sketch
D2
D1
B2
G 1/2 G 1/2
FGJ (DIN-ANSI-JIS)
A (Oval)
B1
PN 25 / DN 25/32
G 1/2 19 x 24.5
G 1/2 Rp 1
22 M10 x 40
ø100
ø140
ø89
75
20
20
33
Performance curves CRI, CRN, CRIE, CRNE 3
p H
[kPa] [m]
CRI, CRN 3
240 -36 (E)
CRIE, CRNE 3
220 -33 50 Hz
ISO 9906 Annex A
2000 -31
200
-29 (E)
180 -27
1600 -25
160
-23 (E)
140 -21
-19 (E)
1200 120
-17
100 -15 (E)
800 -13
80 -12
-11
-10 (E)
60 -9
-8
-7 (E)
400 40 -6
-5 (E)
-4
20 -3
-2
0 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
0.03 20
0.00 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
H NPSH
[m] QH 2900 rpm [m]
6 3
4 2
NPSH
2 1
TM02 7293 3605
0 0
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 Q [m³/h]
34
Technical data CRI, CRN, CRIE, CRNE 3
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2
FGJ (DIN-ANSI-JIS)
B1
ø14 19 x 27
G 1/2 4 x ø13
ø105
ø140
ø89
50
ø42.2
250
22
34
22
35
Performance curves CR, CRE 5
CR, CRE 5
p H
[kPa] [m]
260
CR, CRE 5
50 Hz
2400 -36 (E)
240 ISO 9906 Annex A
220
-32
2000
200 -29 (E)
180
-26
1600 -24
160
-22
140
-20 (E)
0 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
P2
0.10 40
0.05 20
0.00 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
H NPSH
[m] QH 2900 rpm [m]
6 3
4 2
NPSH
TM02 7294 3605
2 1
0 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
36
Technical data CR, CRE 5
Dimensional sketch
D2
D1
B2
G 1/2 G 1/2
D3
FGJ (DIN-ANSI-JIS)
A (Oval)
B1
PN 25 / DN 25/32
G 1/2 19 x 24.5
G 1/2 Rp 1 1/4"
22 M10 x 40
ø100
ø140
ø89
50
20
20
37
Performance curves CRI, CRN, CRIE, CRNE 5
p H
[kPa] [m]
260
CRI, CRN 5
2400
-36 (E) CRIE, CRNE 5
240
50 Hz
ISO 9906 Annex A
220 -32
2000
200 -29 (E)
180
-26
1600 -24
160
-22
140
-20 (E)
0 0
0 1 2 3 4 5 6 7 8 Q [m³/h]
P2
0.10 40
0.05 20
0.00 0
0 1 2 3 4 5 6 7 8 9Q [m³/h]
H NPSH
[m] QH 2900 rpm [m]
6 3
4 2
2 NPSH 1
TM02 7295 3605
0 0
0 1 2 3 4 5 6 7 8 9Q [m³/h]
38
Technical data CRI, CRN, CRIE, CRNE 5
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2
D3
FGJ (DIN-ANSI-JIS)
B1
ø14 19 x 27
G 1/2 4 x ø13
ø105
ø140
ø59
75
50
50
ø42.2
250
22
22
39
Performance curves CR, CRE 10
CR, CRE 10
p H
[kPa] [m]
CR, CRE 10
240
50 Hz
-22 (E)
ISO 9906 Annex A
220
-20
2000
200
-18
180
-16 (E)
1600
160
-14
140
-12 (E)
1200 120
-10
100
-9 (E)
-8
800 80
-7
-6 (E)
60
-5
-4 (E)
400 40
-3 (E)
-2 (E)
20
-1 (E)
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
0.2 40
0.1 20
0.0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
H NPSH
[m] [m]
12 6
2900 rpm
8 4
4 2
TM02 7296 3605
NPSH
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
40
Technical data CR, CRE 10
Dimensional sketch
D2
D1
B2
G 1/2 G 1/2 D3
FJ (DIN-JIS) A (oval)
PN 16-25 / DN 40
B1
Rp 1 1/2"
G 1/2 18 x 20.2 G 1/2
M12 x 45
ø39
27
ø114
ø150
4 x ø13.5
20
20
80
80
41
Performance curves CRI, CRN, CRIE, CRNE 10
p H
[kPa] [m]
CRI, CRN 10
240
-22 (E) CRIE, CRNE 10
220 50 Hz
-20 ISO 9906 Annex A
2000
200
-18
180
-16 (E)
1600
160
-14
140
-12 (E)
1200 120
-10
100
-9 (E)
-8
800 80
-7
-6 (E)
60
-5
-4 (E)
400 40
-3 (E)
-2 (E)
20
-1 (E)
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
0.2 40
0.1 20
0.0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
H NPSH
[m] [m]
12 6
2900 rpm
8 4
4 2
NPSH
TM02 7297 3605
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 Q [m³/h]
42
Technical data CRI, CRN, CRIE, CRNE 10
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2 D3
FGJ (DIN-ANSI-JIS)
P (PJE) PN 16-25 / DN 40 CA (Flexiclamp)
B1
18.5 x 23.5
G 1/2 G 1/2 202
4 x ø13
ø115
ø150
ø87
4 x ø13
26
26
80
80
80
43
Performance curves CR, CRE 15
CR, CRE 15
p H
[kPa] [m]
-17 (E)
CR, CRE 15
240
50 Hz
ISO 9906 Annex A
220
2000
200 -14 (E)
180
-12
1600
160
-10
140
-9 (E)
1200 120
-8
100 -7 (E)
-6
800 80
-5 (E)
60 -4
-3 (E)
400 40
-2 (E)
20 -1 (E)
0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
0 1 2 3 4 5 6 Q [l/s]
P2 Eta
[kW] [%]
0.8 80
P2
Eta
0.6 60
0.4 40
0.2 20
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
H NPSH
[m] [m]
15 2900 rpm 6
10 4
5 2
TM02 7298 3605
NPSH
0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
44
Technical data CR, CRE 15
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2 D3
F (DIN) GJ (ANSI-JIS)
PN 16-25 / DN 50 A (oval)
B1
ø65
ø125
ø165
ø165
ø127
90
90
130
20
45
Performance curves CRI, CRN, CRIE, CRNE 15
p H
[kPa] [m]
-17 (E)
CRI, CRN 15
240
CRIE, CRNE 15
220 50 Hz
ISO 9906 Annex A
2000
200 -14 (E)
180
-12
1600
160
-10
140
-9 (E)
1200 120
-8
100 -7 (E)
-6
800 80
-5 (E)
60 -4
-3 (E)
400 40
-2 (E)
20 -1 (E)
0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
0 1 2 3 4 5 6 Q [l/s]
P2 Eta
[kW] [%]
0.8 80
P2
Eta
0.6 60
0.4 40
0.2 20
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
H NPSH
[m] [m]
15 2900 rpm 6
10 4
5 2
TM02 7299 3605
NPSH
0 0
0 2 4 6 8 10 12 14 16 18 20 22 Q [m³/h]
46
Technical data CRI, CRN, CRIE, CRNE 15
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2 D3
FGJ (DIN-ANSI-JIS)
P (PJE) PN 16-25 / DN50 CA (Flexiclamp)
B1
ø165
ø127
ø87
26
26
90
90
90
26
47
Performance curves CR, CRE 20
CR, CRE 20
p H
[kPa] [m]
260
CR, CRE 20
-17 (E)
50 Hz
2400
240 ISO 9906 Annex A
220
-14 (E)
2000
200
180 -12
1600 160
-10 (E)
140
1200 120 -8
-7 (E)
100
-6
800 80 -5 (E)
60 -4
-3 (E)
400 40
-2 (E)
20 -1 (E)
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
0 1 2 3 4 5 6 7 8 Q [l/s]
P2 Eta
[kW] [%]
1.6 80
1.2 Eta 60
P2
0.8 40
0.4 20
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
H NPSH
[m] [m]
15 2900 rpm 6
10 4
5 2
TM02 7300 3605
NPSH
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
48
Technical data CR, CRE 20
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2 D3
F (DIN) GJ (ANSI-JIS)
PN 16-25 / DN 50 A (oval)
B1
ø65
ø125
ø165
ø165
ø127
90
90
130
20
49
Performance curves CRI, CRN, CRIE, CRNE 20
p H
[kPa] [m]
260
CRI, CRN 20
-17 (E)
2400
CRIE, CRNE 20
240
50 Hz
ISO 9906 Annex A
220
-14 (E)
2000
200
180 -12
1600 160
-10 (E)
140
1200 120 -8
-7 (E)
100
-6
800 80 -5 (E)
60 -4
-3 (E)
400 40
-2 (E)
20 -1 (E)
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
0 1 2 3 4 5 6 7 8 Q [l/s]
P2 Eta
[kW] [%]
1.6 80
1.2 Eta 60
P2
0.8 40
0.4 20
0.0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
H NPSH
[m] [m]
15 2900 rpm 6
10 4
5 2
TM02 7301 3605
NPSH
0 0
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 Q [m³/h]
50
Technical data CRI, CRN, CRIE, CRNE 20
Dimensional sketch
D2
D1
B2
G 1/2
G 1/2 D3
FGJ (DIN-ANSI-JIS)
P (PJE) PN 16-25 / DN50 CA (Flexiclamp)
B1
ø165
ø127
ø87
26
26
90
90
90
26
51
Performance curves CR, CRE 32
CR, CRE 32
p H
[MPa] [m]
280
CR, CRE 32
-14
-14-2 50 Hz
260 -13 ISO 9906 Annex A
-13-2
2.4
240
-12 (E)
-12-2
220
-11
-11-2
2.0
200 -10 (E)
-10-2
180 -9
-9-2
1.6 160 -8 (E)
-8-2
140 -7
-7-2
1.2 120 -6 (E)
-6-2
100 -5
-5-2
0.8 80 -4 (E)
-4-2
60 -3 (E)
-3-2
0.4 40 -2 (E)
-2-2 (E)
20 -1 (E)
-1-1 (E)
0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
0 2 4 6 8 10 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
2.0 Eta 80
2.4 P2 1/1
1.5 60
P2 2/3
1.6
1.0 40
0.8 0.5 20
0.0 0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
p H NPSH
[kPa] [m] [m]
200 20 QH 2900 rpm 1/1 8
160 QH 2900 rpm 2/3 NPSH
15 6
120
10 4
80
5 2
TM02 7302 3605
40
0 0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
52
Technical data CR, CRE 32
Dimensional sketch
D2
D1
B2
D3
G 1/2
PN16-25-40/DN65
B1
G 1/2 8 x ø18
G 1/2
ø107
ø145
ø185
105
170 ø74
223 240
320 298
Motor CR CRE
Pump P2 Dimension [mm] Net weight Dimension [mm] Net weight
type
[kW] B1 B1+B2 D1 D2 D3 [kg] B1 B1+B2 D1 D2 D3 [kg]
CR(E) 32-1-1 1.5 505 786 178 110 270 64 505 786 178 167 270 70
CR(E) 32-1 2.2 505 826 178 110 270 64 505 826 178 167 270 74
CR(E) 32-2-2 3 575 910 198 120 270 71 575 910 198 177 270 81
CR(E) 32-2 4 575 947 220 134 270 82 575 947 220 188 270 92
CR 32-3-2 5.5 645 1036 220 134 300 96 - - - - - -
CR(E) 32-3 5.5 645 1036 220 134 300 96 645 1036 220 188 298 103
CR 32-4-2 7.5 715 1106 220 134 300 101 - - - - - -
CR(E) 32-4 7.5 715 1106 220 134 300 101 715 1106 220 188 298 109
CR 32-5-2 11 895 1394 260 172 350 139 - - - - - -
CR 32-5 11 895 1394 260 172 350 139 - - - - - -
CR 32-6-2 11 965 1464 260 172 350 142 - - - - - -
CR(E) 32-6 11 965 1464 260 172 350 142 965 1414 258 359 350 194
CR 32-7-2 15 1035 1513 320 197 350 163 - - - - - -
CR 32-7 15 1035 1513 320 197 350 163 - - - - - -
CR 32-8-2 15 1105 1583 320 197 350 169 - - - - - -
CR(E) 32-8 15 1105 1583 320 197 350 169 1105 1566 313 377 350 220
CR 32-9-2 18.5 1175 1693 320 197 350 180 - - - - - -
CR 32-9 18.5 1175 1693 320 197 350 180 - - - - - -
CR 32-10-2 18.5 1245 1763 320 197 350 183 - - - - - -
CR(E) 32-10 18.5 1245 1763 320 197 350 183 1245 1744 313 377 350 262
CR 32-11-2 22 1315 1925 363 262 350 272 - - - - - -
CR 32-11 22 1315 1925 363 262 350 272 - - - - - -
CR 32-12-2 22 1385 1995 363 262 350 276 - - - - - -
CR(E) 32-12 22 1385 1995 363 262 350 276 1385 1910 351 399 350 308
CR 32-13-2 30 1455 2101 415 300 400 329 - - - - - -
CR 32-13 30 1455 2101 415 300 400 329 - - - - - -
CR 32-14-2 30 1525 2171 415 300 400 332 - - - - - -
CR 32-14 30 1525 2171 415 300 400 332 - - - - - -
53
Performance curves CRN, CRNE 32
CRN, CRNE 32
p H
[MPa] [m]
280
CRN, CRNE 32
-14
-14-2 50 Hz
260 -13 ISO 9906 Annex A
-13-2
2.4
240
-12 (E)
-12-2
220
-11
-11-2
2.0
200
-10 (E)
-10-2
180 -9
-9-2
1.6 160 -8 (E)
-8-2
140 -7
-7-2
1.2 120 -6 (E)
-6-2
100 -5
-5-2
0.8 80 -4 (E)
-4-2
60 -3 (E)
-3-2
0.4 40 -2 (E)
-2-2 (E)
20 -1 (E)
-1-1 (E)
0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
0 2 4 6 8 10 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
2.0 Eta 80
2.4 P2 1/1
1.5 60
P2 2/3
1.6
1.0 40
0.8 0.5 20
0.0 0.0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
p H NPSH
[kPa] [m] [m]
20 QH 2900 rpm 1/1 8
160 QH 2900 rpm 2/3 NPSH
15 6
120
10 4
80
5 2
TM02 7303 3605
40
0 0 0
0 4 8 12 16 20 24 28 32 36 Q [m³/h]
54
Technical data CRN, CRNE 32
Dimensional sketch
D2
D1
B2
D3
G 1/2
PN16-25-40/DN65
B1
G 1/2 8 x ø18
G 1/2
ø107
ø145
ø185
105
170 ø74
226 240
320 298
55
Performance curves CR, CRE 45
CR, CRE 45
p H
[MPa] [m]
340 CR, CRE 45
-13-2
3.2 50 Hz
320
-12 ISO 9906 Annex A
-12-2
300
2.8 -11
280 -11-2
260 -10
-10-2
2.4
240
-9
220 -9-2
2.0 -8
200 -8-2
180 -7
-7-2
1.6 160
-6 (E)
-6-2
140
-5 (E)
1.2 120 -5-2
100 -4 (E)
-4-2
0.8 80 -3 (E)
-3-2
60
-2 (E)
0.4 40 -2-2 (E)
-1 (E)
20 -1-1 (E)
0.0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
0 2 4 6 8 10 12 14 16 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
4 Eta 80
P2 1/1
4 3 60
P2 2/3
2 40
2
1 20
0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
p H NPSH
[kPa] [m] [m]
QH 2900 rpm 1/1
25 5
QH 2900 rpm 2/3 NPSH
200 20 4
150 15 3
100 10 2
50
TM02 7304 3605
5 1
0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
56
Technical data CR, CRE 45
Dimensional sketch
D2
D1
B2
D3
G 1/2
PN16-25-40/DN80
B1
G 1/2 8 x ø18
G 1/2
ø120
ø160
ø200
140
248 266
365 331
Motor CR CRE
Pump P2 Dimension [mm] Net weight Dimension [mm] Net weight
type
[kW] B1 B1+B2 D1 D2 D3 [kg] B1 B1+B2 D1 D2 D3 [kg]
CR(E) 45-1-1 3 559 894 198 120 270 78 559 894 198 177 270 88
CR(E) 45-1 4 559 931 220 134 270 89 559 931 220 188 270 99
CR(E) 45-2-2 5.5 639 1030 220 134 300 104 639 1030 220 188 298 110
CR(E) 45-2 7.5 639 1030 220 134 300 106 639 1030 220 188 298 114
CR 45-3-2 11 829 1328 260 172 350 144 - - - - - -
CR(E) 45-3 11 829 1328 260 172 350 144 829 1278 258 359 350 196
CR 45-4-2 15 909 1387 320 197 350 166 - - - - - -
CR(E) 45-4 15 909 1387 320 197 350 166 909 1370 313 377 350 217
CR 45-5-2 18.5 989 1507 320 197 350 177 - - - - - -
CR(E) 45-5 18.5 989 1507 320 197 350 177 989 1488 313 377 350 256
CR 45-6-2 22 1069 1679 363 262 350 269 - - - - - -
CR(E) 45-6 22 1069 1679 363 262 350 269 1069 1594 351 399 350 301
CR 45-7-2 30 1149 1795 415 300 400 324 - - - - - -
CR 45-7 30 1149 1795 415 300 400 324 - - - - - -
CR 45-8-2 30 1229 1875 415 300 400 328 - - - - - -
CR 45-8 30 1229 1875 415 300 400 328 - - - - - -
CR 45-9-2 30 1309 1955 415 300 400 332 - - - - - -
CR 45-9 37 1309 2012 415 300 400 362 - - - - - -
CR 45-10-2 37 1389 2092 415 300 400 367 - - - - - -
CR 45-10 37 1389 2092 415 300 400 367 - - - - - -
CR 45-11-2 45 1469 2178 442 325 450 450 - - - - - -
CR 45-11 45 1469 2178 442 325 450 450 - - - - - -
CR 45-12-2 45 1549 2258 442 325 450 455 - - - - - -
CR 45-12 45 1549 2258 442 325 450 455 - - - - - -
CR 45-13-2 45 1629 2338 442 325 450 459 - - - - - -
57
Performance curves CRN, CRNE 45
CRN, CRNE 45
p H
[MPa] [m]
340 CRN, CRNE 45
-13-2
3.2 50 Hz
320
-12 ISO 9906 Annex A
-12-2
300
2.8 -11
280 -11-2
260 -10
-10-2
2.4
240
-9
220 -9-2
2.0 -8
200 -8-2
180 -7
-7-2
1.6 160
-6 (E)
-6-2
140
-5 (E)
1.2 120 -5-2
100 -4 (E)
-4-2
0.8 80 -3 (E)
-3-2
60
-2 (E)
0.4 40 -2-2 (E)
-1 (E)
20 -1-1 (E)
0.0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
0 2 4 6 8 10 12 14 16 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
4 Eta 80
P2 1/1
4 3 60
P2 2/3
2 40
2
1 20
0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
p H NPSH
[kPa] [m] [m]
QH 2900 rpm 1/1
25 5
QH 2900 rpm 2/3 NPSH
200 20 4
150 15 3
100 10 2
TM02 7305 3605
50 5 1
0 0 0
0 5 10 15 20 25 30 35 40 45 50 55 Q [m³/h]
58
Technical data CRN, CRNE 45
Dimensional sketch
D2
D1
B2
D3
G 1/2
PN16-25-40/DN80
B1
G 1/2 8 x ø18
G 1/2
ø120
ø160
ø200
140
251 266
365 331
59
Performance curves CR, CRE 64
CR, CRE 64
p H
[MPa] [m]
CR, CRE 64
240
50 Hz
-8-1 ISO 9906 Annex A
220 -8-2
-7
2.0
200 -7-1
-7-2
180 -6
-6-1
1.6
160 -6-2
-5
140 -5-1
-5-2
1.2 120 -4 (E)
-4-1
100 -4-2 (E)
-3
0.8 80 -3-1 (E)
-3-2
60 -2 (E)
-2-1
0.4 40 -2-2 (E)
-1 (E)
20 -1-1 (E)
0.0 0
0 10 20 30 40 50 60 70 80 Q [m³/h]
0 5 10 15 20 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
8 80
10 Eta
8 6 P2 1/1 60
6 4 P2 2/3 40
4
2 20
2
0 0 0
0 10 20 30 40 50 60 70 80 Q [m³/h]
p H NPSH
[kPa] [m] [m]
300 32 8
QH 2900 rpm 1/1
NPSH
24 6
200 QH 2900 rpm 2/3
16 4
100
8 2
TM02 7306 3605
0 0 0
0 10 20 30 40 50 60 70 80 Q [m³/h]
60
Technical data CR, CRE 64
Dimensional sketch
D2
D1
F (DIN)
PN25-40/DN100
B2 8 x ø22
G 1/2
ø235
ø150
ø190
ø100 4 x ø14
45
D3
266
G 1/2 331
F (DIN)
PN16/DN100
B1
G 1/2 8 x ø18
G 1/2
ø150
ø180
ø220
140
248 266
365 331
Motor CR CRE
Pump P2 Dimension [mm] Net weight Dimension [mm] Net weight
type
[kW] B1 B1+B2 D1 D2 D3 [kg] B1 B1+B2 D1 D2 D3 [kg]
CR(E) 64-1-1 4 561 933 220 134 270 91 561 933 220 188 270 101
CR(E) 64-1 5.5 561 952 220 134 300 102 561 952 220 188 298 109
CR(E) 64-2-2 7.5 644 1035 220 134 300 109 644 1035 220 188 298 117
CR 64-2-1 11 754 1253 260 172 350 143 - - - - - -
CR(E) 64-2 11 754 1253 260 172 350 143 754 1203 258 359 350 195
CR 64-3-2 15 836 1314 320 197 350 166 - - - - - -
CR(E) 64-3-1 15 836 1314 320 197 350 166 836 1297 313 377 350 217
CR 64-3 18.5 836 1354 320 197 350 173 - - - - - -
CR(E) 64-4-2 18.5 919 1437 320 197 350 177 919 1418 313 377 350 256
CR 64-4-1 22 919 1529 363 262 350 263 - - - - - -
CR(E) 64-4 22 919 1529 363 262 350 263 919 1444 351 399 350 295
CR 64-5-2 30 1001 1647 415 300 400 318 - - - - - -
CR 64-5-1 30 1001 1647 415 300 400 318 - - - - - -
CR 64-5 30 1001 1647 415 300 400 318 - - - - - -
CR 64-6-2 30 1084 1730 415 300 400 324 - - - - - -
CR 64-6-1 37 1084 1787 415 300 400 354 - - - - - -
CR 64-6 37 1084 1787 415 300 400 354 - - - - - -
CR 64-7-2 37 1166 1869 415 300 400 359 - - - - - -
CR 64-7-1 37 1166 1869 415 300 400 359 - - - - - -
CR 64-7 45 1166 1875 442 325 450 438 - - - - - -
CR 64-8-2 45 1249 1958 442 325 450 443 - - - - - -
CR 64-8-1 45 1249 1958 442 325 450 443 - - - - - -
61
Performance curves CRN, CRNE 64
CRN, CRNE 64
p H
[MPa] [m]
CRN, CRNE 64
240
50 Hz
-8-1 ISO 9906 Annex A
220 -8-2
-7
2.0
200 -7-1
-7-2
180 -6
-6-1
1.6
160 -6-2
-5
140 -5-1
-5-2
1.2 120 -4 (E)
-4-1
100 -4-2 (E)
-3
0.8 80 -3-1 (E)
-3-2
60 -2 (E)
-2-1
0.4 40 -2-2 (E)
-1 (E)
20 -1-1 (E)
0.0 0
0 10 20 30 40 50 60 70 Q [m³/h]
0 5 10 15 20 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
8 80
10 Eta
8 6 P2 1/1 60
6 4 P2 2/3 40
4
2 20
2
0 0 0
0 10 20 30 40 50 60 70 Q [m³/h]
p H NPSH
[kPa] [m] [m]
300 32 8
QH 2900 rpm 1/1
NPSH
24 6
200 QH 2900 rpm 2/3
16 4
100
8 2
TM02 7307 3605
0 0 0
0 10 20 30 40 50 60 70 Q [m³/h]
62
Technical data CRN, CRNE 64
Dimensional sketch
D2
D1
F (DIN)
PN25-40/DN100
8 x ø22
B2
G 1/2
ø235
ø150
ø190
ø100 4 x ø14
45
D3
266
G 1/2 331
F (DIN)
PN16/DN100
B1
G 1/2 8 x ø18
G 1/2
ø220
ø150
ø180
140
251 266
365 331
63
Performance curves CR, CRE 90
CR, CRE 90
p H
[MPa] [m]
2.0
210
-6
CR, CRE 90
200 50 Hz
190 ISO 9906 Annex A
1.8 -6-2
180
170 -5
1.6
160
150 -5-2
1.4
140
-4
130
1.2 120
-4-2
110
1.0 100 -3 (E)
90
0.8 80 -3-2 (E)
70 -2 (E)
0.6 60
50 -2-2 (E)
0.4 40
-1 (E)
30
-1-1 (E)
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 Q [m³/h]
0 5 10 15 20 25 30 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
8 80
10 P2 1/1
8 6 Eta 60
P2 2/3
6 4 40
4
2 20
2
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 Q [m³/h]
p H NPSH
[kPa] [m] [m]
40 8
QH 2900 rpm 1/1 NPSH
300 30 6
QH 2900 rpm 2/3
200 20 4
100 10 2
TM02 7308 3605
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 Q [m³/h]
64
Technical data CR, CRE 90
Dimensional sketch
D2
D1
F (DIN)
PN25-40/DN100
B2 8 x ø22
G 1/2
ø235
ø156
ø190
4 x ø14
45
D3 ø100
280
G 1/2 348
F (DIN)
PN16/DN100
B1
8 x ø18
G 1/2
G 1/2
ø220
ø156
ø180
140
261 280
380 348
Motor CR CRE
Pump P2 Dimension [mm] Net weight Dimension [mm] Net weight
type
[kW] B1 B1+B2 D1 D2 D3 [kg] B1 B1+B2 D1 D2 D3 [kg]
CR(E) 90-1-1 5.5 571 962 220 134 300 107 571 962 220 188 298 114
CR(E) 90-1 7.5 571 962 220 134 300 109 571 962 220 188 298 117
CR(E) 90-2-2 11 773 1272 260 172 350 149 773 1222 258 359 350 201
CR(E) 90-2 15 773 1251 320 197 350 167 773 1234 313 377 350 218
CR(E) 90-3-2 18.5 865 1383 320 197 350 179 865 1364 313 377 350 258
CR(E) 90-3 22 865 1475 363 262 350 264 865 1390 351 399 350 296
CR 90-4-2 30 957 1603 415 300 400 320 - - - - - -
CR 90-4 30 957 1603 415 300 400 320 - - - - - -
CR 90-5-2 37 1049 1752 415 300 400 356 - - - - - -
CR 90-5 37 1049 1752 415 300 400 356 - - - - - -
CR 90-6-2 45 1141 1850 442 325 450 441 - - - - - -
CR 90-6 45 1141 1850 442 325 450 441 - - - - - -
65
Performance curves CRN, CRNE 90
CRN, CRNE 90
p H
[MPa] [m]
2.0
210
-6
CRN, CRNE 90
200 50 Hz
190 ISO 9906 Annex A
1.8 -6-2
180
170 -5
1.6
160
150 -5-2
1.4
140
-4
130
1.2 120
-4-2
110
1.0 100 -3 (E)
90
0.8 80 -3-2 (E)
70 -2 (E)
0.6 60
50 -2-2 (E)
0.4 40
-1 (E)
30
-1-1 (E)
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 Q [m³/h]
0 5 10 15 20 25 30 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
8 80
10 P2 1/1
8 6 Eta 60
P2 2/3
6 4 40
4
2 20
2
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 Q [m³/h]
p H NPSH
[kPa] [m] [m]
40 8
QH 2900 rpm 1/1 NPSH
300 30 6
QH 2900 rpm 2/3
200 20 4
100 10 2
TM02 7309 3605
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 Q [m³/h]
66
Technical data CRN, CRNE 90
Dimensional sketch
D2
D1
F (DIN)
PN25-40/DN100
8 x ø22
B2
G 1/2
ø235
ø156
ø190
ø100 4 x ø14
45
D3
280
G 1/2 348
F (DIN)
PN16/DN100
B1
G 1/2 8 x ø18
G 1/2
ø235
ø156
ø180
140
261 280
380 348
67
Performance curves CR 120
CR 120
p H
[MPa] [m]
2.0
210 -7 CR 120
200 50 Hz
190 ISO 9906 Annex A
1.8
180
170 -6-1
1.6
160
150
1.4 -5-1
140
130
1.2 120
-4-1
110
1.0 100
90 -3
0.8 80
70
0.6 -2
60
-2-1
50
0.4 40
-1
30
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
0 5 10 15 20 25 30 35 40 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
16 Eta 80
20
12 60
15 P2 1/1
10 8 P2 2/3 40
5 4 20
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
p H NPSH
[kPa] [m] [m]
300 30 QH 2900 rpm 1/1 12
100 10 4
NPSH
TM03 8743 2407
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
68
Technical data CR 120
Dimensional sketch
69
Performance curves CRN 120
CRN 120
p H
[MPa] [m]
2.0
210 -7 CRN 120
200 50 Hz
190 ISO 9906 Annex A
1.8
180
170 -6-1
1.6
160
150
CRN 120 curves
1.4 -5-1
140
130
1.2 120
-4-1
110
1.0 100
90 -3
0.8 80
70
0.6 -2
60
-2-1
50
0.4 40
-1
30
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
0 5 10 15 20 25 30 35 40 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
16 Eta 80
20
12 60
15 P2 1/1
10 8 P2 2/3 40
5 4 20
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
p H NPSH
[kPa] [m] [m]
300 30 QH 2900 rpm 1/1 12
100 10 4
TM03 8744 2407
NPSH
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
70
Technical data CRN 120
Dimensional sketch
71
Performance curves CR 150
CR 150
p H
[MPa] [m]
200
-6 CR 150
190 50 Hz
1.8
180 ISO 9906 Annex A
170
1.6
160
150
-5-2
1.4
140
130
1.2 -4-1
120
110
1.0 100 -3
90
0.8 80 -3-2
70
0.6 60 -2-1
50
0.4 40
-1
30
-1-1
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Q [m³/h]
0 5 10 15 20 25 30 35 40 45 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
16 Eta 80
20
12 P2 1/1 60
15
P2 2/3
10 8 40
5 4 20
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Q [m³/h]
p H NPSH
[kPa] [m] [m]
QH 2900 rpm 1/1
300 30 12
QH 2900 rpm 2/3
200 20 8
100 10 4
TM03 8745 2407
NPSH
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Q [m³/h]
72
Technical data CR 150
Dimensional sketch
73
Performance curves CRN 150
CRN 150
p H
[MPa] [m]
200
-6 CRN 150
190 50 Hz
1.8
180 ISO 9906 Annex A
170
1.6
160
150
-5-2
1.4
140
130
1.2 -4-1
120
110
1.0 100 -3
90
0.8 80 -3-2
70
0.6 60 -2-1
50
0.4 40
-1
30
-1-1
0.2 20
10
0.0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Q [m³/h]
0 5 10 15 20 25 30 35 40 45 Q [l/s]
P2 P2 Eta
[hp] [kW] [%]
16 Eta 80
20
12 P2 1/1 60
15
P2 2/3
10 8 40
5 4 20
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Q [m³/h]
p H NPSH
[kPa] [m] [m]
QH 2900 rpm 1/1
300 30 12
QH 2900 rpm 2/3
200 20 8
100 10 4
NPSH
TM03 8746 2407
0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 Q [m³/h]
74
Technical data CRN 150
Dimensional sketch
75
Motor data CR, CRI, CRN,
CRE, CRIE, CRNE
76
Motor data CR, CRI, CRN,
CRE, CRIE, CRNE
* Pumps are normally fitted with single-phase MGE motors. Previous dimensions tables show pumps with single-phase MGE motors
77
Pumped liquids CR, CRI, CRN,
CRE, CRIE, CRNE
Liquid concentration,
Pumped liquid Note CR(E), CRI(E) CRN(E)
liquid temperature
Acetic acid, CH3COOH - 5 %, +20 °C - HQQE
Acetone, CH3COCH3 1, F 100 %, +20 °C - HQQE
Alkaline degreasing agent D, F - HQQE -
Ammonium bicarbonate, NH4HCO3 E 20 %, +30 °C - HQQE
Ammonium hydroxide, NH4OH - 20 %, +40 °C HQQE -
Aviation fuel 1, 3, 4, F 100 %, +20 °C HQBV -
Benzoic acid, C 6H5COOH H 0.5 %, +20 °C - HQQV
- < +120 °C HQQE -
Boiler water
F +120 °C - +180 °C - -
Calcareous water - < +90 °C HQQE -
Calcium acetate (as coolant with inhibitor)
D, E 30 %, +50 °C HQQE -
Ca(CH3COO)2
Calcium hydroxide, Ca(OH)2 E Saturated solution, +50 °C HQQE -
Chloride-containing water F < +30 °C, max. 500 ppm - HQQE
Chromic acid, H2CrO 4 H 1 %, +20 °C - HQQV
Citric acid, HOC(CH2CO2H)2COOH H 5 %, +40 °C - HQQE
Completely desalinated water
- +120 °C - HQQE
(demineralized water)
78
Pumped liquids CR, CRI, CRN,
CRE, CRIE, CRNE
Liquid concentration,
Pumped liquid Note CR(E), CRI(E) CRN(E)
liquid temperature
Condensate - 120 °C HQQE -
Copper sulphate, CuSO4 E 10 %, +50 °C - HQQE
Corn oil D, E, 3 100 %, +80 °C HQQV -
Diesel oil 2, 3, 4, F 100 %, +20 °C HQBV -
Domestic hot water (potable water) - < +120 °C HQQE -
Ethanol (ethyl alcohol), C2H5OH 1, F 100 %, +20 °C HQQE -
Ethylene glycol, HOCH2CH2OH D, E 50 %, +50 °C HQQE -
Formic acid, HCOOH - 5 %, +20 °C - HQQE
Glycerine (glycerol),
D, E 50 %, +50 °C HQQE -
OHCH2CH(OH)CH2OH
Hydraulic oil (mineral) E, 2, 3 100 %, +100 °C HQQV -
Hydraulic oil (synthetic) E, 2, 3 100 %, +100 °C HQQV -
Isopropyl alcohol, CH3CHOHCH3 1, F 100 %, +20 °C HQQE -
Lactic acid, CH3CH(OH)COOH E, H 10 %, +20 °C - HQQV
Linoleic acid, C 17H31COOH E, 3 100 %, +20 °C HQQV -
Methanol (methyl alcohol), CH3OH 1, F 100 %, +20 °C HQQE -
Motor oil E, 2, 3 100 %, +80 °C HQQV -
Naphthalene, C10H8 E, H 100 %, +80 °C HQQV -
Nitric acid, HNO3 F 1 %, +20 °C - HQQE
Oil-containing water - < +100 °C HQQV -
Olive oil D, E, 3 100 %, +80 °C HQQV -
Oxalic acid, (COOH)2 H 1 %, +20 °C - HQQE
Ozone-containing water, (O3) - < +100 °C - HQQE
Peanut oil D, E, 3 100 %, +80 °C HQQV -
Petrol 1, 3, 4, F 100 %, +20 °C HQBV -
Phosphoric acid, H3PO4 E 20 %, +20 °C - HQQE
Propanol, C3H7OH 1, F 100 %, +20 °C HQQE -
Propylene glycol, CH3CH(OH)CH2OH D, E 50 %, +90 °C HQQE -
Potassium carbonate, K2CO3 E 20 %, +50 °C HQQE -
Potassium formate
D, E 30 %, +50 °C HQQE -
(as coolant with inhibitor), KOOCH
Potassium hydroxide, KOH E 20 %, +50 °C - HQQE
Potassium permanganate, KMnO4 - 5 %, +20 °C - HQQE
Rape seed oil D, E, 3 100 %, +80 °C HQQV -
Salicylic acid, C6H4(OH)COOH H 0.1 %, +20 °C - HQQE
Silicone oil E, 3 100 % HQQV -
Sodium bicarbonate, NaHCO 3 E 10 %, +60 °C - HQQE
Sodium chloride (as coolant), NaCl D, E 30 %, < +5 °C, pH > 8 HQQE -
Sodium hydroxide, NaOH E 20 %, +50 °C - HQQE
Sodium hypochlorite, NaOCl F 0.1 %, +20 °C - HQQV
Sodium nitrate, NaNO3 E 10 %, +60 °C - HQQE
Sodium phosphate, Na3PO4 E, H 10 %, +60 °C - HQQE
Sodium sulphate, Na 2SO4 E, H 10 %, +60 °C - HQQE
Softened water - < +120 °C - HQQE
Soya oil D, E, 3 100 %, +80 °C HQQV -
Sulphuric acid, H2SO4 F 1 %, +20 °C - HQQV
Sulphurous acid, H 2SO3 - 1 %, +20 °C - HQQE
Approx. 2 ppm free chlorine
Unsalted swimming pool water - (Cl2) HQQE -
79
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
Pipework connection
Various sets of counter flanges and couplings are avail-
able for pipework connection.
ø19
Threaded 16 bar, EN 1092-2 Rp 1¼ 419901
TM03 0400 3705
CR 1s
CR(E) 1
CR(E) 3
ø78 CR(E) 5
ø100 For welding 25 bar, EN 1092-2 32 mm, nominal 419902
ø140
ø19
Threaded 16 bar, EN 1092-2 Rp 2 339903
TM03 0402 3705
ø102
ø125 Threaded 16 bar, special flange Rp 2½ 339904
ø165
19.5
TM02 7203 2803
ø127
CR(E) 15 Rp 2½
Threaded 16 bar, special flange 96509578
18.5
CR(E) 20
ø102
ø125
ø165
ø19
For welding 25 bar, EN 1092-2 50 mm, nominal 339901
TM03 0402 3705
ø102
ø125 For welding 40 bar, special flange 65 mm, nominal 339902
ø165
Rp 2½ / 16 bar Rp 3 / 16 bar 40 bar For welding 16 bar, special flange 80 mm, nominal 349903
80
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
Pipework Product
Counter flange Pump type Description Rated pressure
connection number
ø132
ø160 For welding 40 bar 80 mm, nominal 350542
ø200
ø26
TM03 8892 2707
ø218
ø250
ø300
Flange with 20 mm higher collar. With this collar, the installation dimensions of a CR 20 will be identical to those of a CR 32.
If a CR 32 is replaced with a CR 20, the base must be raised by 15 mm.
81
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
Pipework Product
Counter flange Pump type Description Rated pressure
connection number
ø19
ø19
Threaded 16 bar, EN 1092-2 Rp 1¼ 415304
TM03 0400 3705
CRI(E), CRN(E)
1s, 1, 3, 5
ø78
ø100 For welding 25 bar, EN 1092-2 32 mm, nominal 415305
ø140
ø19
TM03 0401 3705
21
TM02 7202 2803
ø115
ø89
ø110
ø150
CRI(E) 10
ø19
CRN(E) 10
TM03 0401 3705
21
TM02 7202 2803
ø115
ø89
ø110
ø150
82
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
Pipework Product
Counter flange Pump type Description Rated pressure
connection number
ø19
19.5
Rp 2½
ø102 Threaded 16 bar, special flange 96509579
ø125
ø165
CRI(E) 15, 20
CRN(E) 15, 20
ø19
TM03 0402 3705
19.5
TM00 7203 2803
ø127
ø102
ø125
ø165
ø19
ø19
Threaded 16 bar, special flange Rp 3 349911
ø132
ø160 For welding 40 bar 80 mm, nominal 350545
ø200
CRN(E) 64
For welding 16 bar 100 mm, nominal 369903
CRN(E) 90
ø158 ø162
ø180 ø190
ø220 ø235 For welding 40 bar 100 mm, nominal 369906
16 bar 40 bar
ø26
TM03 8892 2707
Flange with 20 mm higher collar. With this collar, the installation dimensions of a CR 20 will be identical to those of a CR 32.
If a CR 32 is replaced with a CR 20, the base must be raised by 15 mm.
83
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
Number of
Pipework Rubber Product
Coupling Pump type Pipe stub PN A B coupling
connection parts number
sets needed
EPDM 2 419911
Threaded 80 bar 50 320 R 1¼
TM00 3808 1094
EPDM 2 339911
Threaded 70 bar 80 377 R2
TM03 8890 2707
Number of
Pipework Rubber Product
Base connection Pump type Connection PN A B coupling
connection parts number
sets needed
Rp 1 Klingersil 1 96449748
Oval
TM02 7368 3303
(cast iron)
CRI(E) Rp 1¼ Klingersil 1 96449749
CRN(E) 16 50 210
1, 3, 5 Rp 1 Klingersil 2 96449746
A Oval
B (stainless steel)
Rp 1¼ Klingersil 2 96449747
EPDM 2 96449743
TM02 7369 3303
CRI(E)
CRN(E) Union G2 25 50 228
1, 3, 5
A
B FKM 2 96449744
EPDM 2 96449745
TM02 7370 3303
CRI(E)
DIN DN 25
CRN(E) 16 75 250
(stainless steel) DN 32
1, 3 5
A FKM 2 96449900
B
EPDM 2 405280
Rp 1
FKM 2 405281
EPDM 2 415296
Clamp, Rp 1¼
FKM 2 415297
threaded pipe 208
stub EPDM 2 405291
CRI(E) 1" NPT
FKM 2 405292
CRN(E) 25 50
1, 3, 5 EPDM 2 415311
A 1¼" NPT
TM02 7371 3303
B FKM 2 415312
EPDM 2 405282
28.5 -
Clamp, pipe stub FKM 2 405283
for welding EPDM 2 415300
37.2 -
FKM 2 415301
84
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
Number of
Pipework Rubber Product
Base connection Pump type Connection PN A B coupling
connection parts number
sets needed
Rp 1¼ Klingersil 2 96498775
Oval
Rp 1½ Klingersil 2 96498727
(cast iron)
Rp 2 Klingersil 2 96498836
CRI(E) 10
16 80 260
TM02 7372 3303
CRN(E) 10
A
Rp 1¼ Klingersil 2 96498776
B Oval
Rp 1½ Klingersil 2 96498728
(stainless steel)
Rp 2 Klingersil 2 96498835
EPDM 2 96500275
TM02 7374 3303
CRI(E) 10
Union G 2¾ 25 80 288
CRN(E) 10
A FKM 2 96500276
B
EPDM 2 96498840
FGJ
(cast iron)
FKM 2 96500119
DN 40
EPDM 2 96500263
FGJ
(stainless steel)
FKM 2 96500264
CRI(E) 10
16 80 316
CRN(E) 10
EPDM 2 96500265
A FGJ
TM02 7373 3303
B (cast iron)
FKM 2 96500266
DN 50
EPDM 2 96500267
FGJ
(stainless steel)
FKM 2 96500269
EPDM 2 425238
Rp 1½
FKM 2 425239
259
EPDM 2 335241
Clamp, threaded
Rp 2
pipe stub
FKM 2 335242
EPDM 2 96508600
CRI(E) 10
Rp 2½ 25 80 346
CRN(E) 10
FKM 2 96508601
A
B
EPDM 2 425242
48.3 (DN 40) -
TM02 7375 3303
FKM 2 425243
Clamp, pipe stub
for welding
EPDM 2 335251
60.3 (DN 50) -
FKM 2 335252
85
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
Number of
Pipework Rubber Product
Base connection Pump type Connection PN A B coupling
connection parts number
sets needed
Rp 1¼ Klingersil 2 96498775
Oval
Rp 1½ Klingersil 2 96498727
(cast iron)
CRI(E)
Rp 2 Klingersil 2 96498836
15, 20
10 90 260
TM02 7372 3303
CRN(E)
Rp 1¼ Klingersil 2 96498776
A 15, 20
B Oval
Rp 1½ Klingersil 2 96498728
(stainless steel)
Rp 2 Klingersil 2 96498835
EPDM 2 96500275
TM02 7374 3303
CRI(E)
15, 20
Union G 2¾ 25 90 288
CRN(E)
A
15, 20
FKM 2 96500276
B
EPDM 2 96498840
FGJ
(cast iron)
FKM 2 96500119
DN 40
EPDM 2 96500263
FGJ
CRI(E) (stainless steel)
FKM 2 96500264
15, 20
10 90 334
CRN(E)
EPDM 2 96500265
A 15, 20 FGJ
TM02 7373 3303
B (cast iron)
FKM 2 96500266
DN 50
EPDM 2 96500267
FGJ
(stainless steel)
FKM 2 96500269
EPDM 2 425238
Rp 1½
FKM 2 425239
259
EPDM 2 335241
Clamp, threaded
Rp 2
pipe stub
FKM 2 335242
CRI(E)
EPDM 2 96508600
15, 20
Rp 2½ 25 90 346
CRN(E)
15, 20 FKM 2 96508601
A
B
EPDM 2 425242
48.3 (DN 40) -
TM02 7375 3303
FKM 2 425243
Clamp, pipe stub
for welding
EPDM 2 335251
60.3 (DN 50) -
FKM 2 335252
86
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
G10-LON interface for CRE, CRIE, EMC filter for CRE, CRIE, CRNE
CRNE The EMC filter is required for installation of 11 to 22 kW
Use the G10-LON interface in connection with data E-pumps in residential areas.
transmission between a Locally Operating Network
(LON) and electronically controlled Grundfos pumps Product Product number
applying the Grundfos bus-protocol GENIbus. EMC-filter (11 kW)
EMC-filter (15 kW)
96478309
Product Product number EMC-filter (18.5 kW)
200-240 z z z - 96556429
116 mm
CR(E)
CRI(E) 80-130 z z z - 96556430
CRN(E)
TM03 2108 3705
- - - - z 96443676
90 mm
87
Accessories CR, CRI, CRN,
CRE, CRIE, CRNE
Flowmeter
SITRANS FM MAGFLO
Siemens 1-5m3 ID8285
MAG 5100 W (DN 25)
Flowmeter
SITRANS FM MAGFLO
Siemens 3-10 m3 ID8286
MAG 5100 W (DN 40)
SITRANS FM MAGFLO 3
Flowmeter Siemens 6-30 m ID8287
MAG 5100 W (DN 65)
Flowmeter
SITRANS FM MAGFLO
Siemens 20-75 m3 ID8288
MAG 5100 W (DN 100)
Temperature sensor TTA (0) 25 Carlo Gavazzi 0 °C to +25 °C 96432591
Temperature sensor TTA (-25) 25 Carlo Gavazzi –25 °C to +25 °C 96430194
Temperature sensor TTA (50) 100 Carlo Gavazzi +50 °C to +100 °C 96432592
Temperature sensor TTA (0) 150 Carlo Gavazzi 0 °C to +150 °C 96430195
Protecting tube
Carlo Gavazzi 96430201
∅9 x 50 mm
Accessory for temperature sensor.
Protecting tube
All with ½ RG connection Carlo Gavazzi 96430202
∅9 x 100 mm
Cutting ring bush Carlo Gavazzi 96430203
tmg
Temperature sensor, ambient temperature WR 52 –50 °C to +50 °C ID8295
(DK: Plesner)
Differential temperature sensor ETSD Honsberg 0 °C to +20 °C 96409362
Differential temperature sensor ETSD Honsberg 0 °C to +50 °C 96409363
Note: All sensors have 4-20 mA signal output.
Danfoss pressure sensor kits for CRE, CRIE, CRNE 1, 3, 5, 10, 15, 20, 32, 45, 64 and 90
The kit comprises: Pressure range Temperature range Product number
• Danfoss pressure transmitter, type MBS 3000, 0-4 bar 96428014
with 2 m screened cable 0-6 bar 96428015
Connection: G ½ A (DIN 16288 - B6kt)
• 5 cable clips (black) 0-10 bar –40 °C to +85 °C 96428016
• Instruction manual PT (00 40 02 12) 0-16 bar 96428017
0-25 bar 96428018
88
Variants CR, CRI, CRN,
CRE, CRIE, CRNE
89
Further product CR, CRI, CRN,
CRE, CRIE, CRNE
documentation
WebCAPS
WebCAPS is a Web-based Computer Aided Product
Selection program available on www.grundfos.com.
WebCAPS contains detailed information on more than
185,000 Grundfos products in more than 20 languages.
In WebCAPS, all information is divided into 6 sections:
• Catalogue
• Literature
• Service
• Sizing
• Replacement
• CAD drawings.
Catalogue
Literature
In this section you can access all the latest documents of a given
pump, such as
• data booklets
• installation and operating instructions
• service documentation, such as Service kit catalogue and
Service kit instructions
• quick guides
• product brochures.
Service
90
Further product CR, CRI, CRN,
CRE, CRIE, CRNE
documentation
Sizing 0 1
Replacement
CAD drawings
2-dimensional drawings:
• .dxf, wireframe drawings
• .dwg, wireframe drawings.
3-dimensional drawings:
• .dwg, wireframe drawings (without surfaces)
• .stp, solid drawings (with surfaces)
• .eprt, E-drawings.
WinCAPS
WinCAPS is a Windows-based Computer Aided
Product Selection program containing detailed informa-
tion on more than 185,000 Grundfos products in more
than 20 languages.
The program contains the same features and functions
as WebCAPS, but is an ideal solution if no Internet
connection is available.
WinCAPS is available on CD-ROM and updated once a
year.
Fig. 28 WinCAPS CD-ROM
91
Being responsible is our foundation
Thinking ahead makes it possible
Innovation is the essence
V7023751 1007
Repl. V7023751 0706
GB
Subject to alterations.
www.grundfos.com