Académique Documents
Professionnel Documents
Culture Documents
Product Brochure
Product appearance
Application Scenarios
Leased line
Enterprise
Fiber
Fiber
10GE to Site, 50GE to AGG, Smooth to 100GE
2G/3G/4G/4.5G
ATN950C
ATN950C SGW/PGW
Product Overview CPE Carrier1#
Carrier2#
WTTx Carrier3#
Carrier4#
An ATN 950C is a new 10GE-to-site product that is oriented to the evolution to 4.5G/5G wireless base stations. Adhering Bearer Protocol :Seamless MPLS
to Huawei's "Any Media" mobile bearer idea, the ATN 950C provides multi-service access, clock transmission over
O&M:IPFPM/TWAMP
anymedia, and high-precision clock and time synchronization functions. It also provides various access interfaces, for
example, tocopper cables and optical fibers. With a 2 U-height compact design, the ATN 950C shares a cabinet with a baseband
control unit(BBU), which reducessite resourceconsumption and CAPEX..
station, access layer,pre-aggregation high-capacity requirements. (IPFPM) for E2E performance detection which helps efficiently and accurately identify performance degradation. By
collaborating with segment-by-segment detection and measurement, faults can be rapidly demarcated and
located.
Large buffer, protecting devicesfrom traffic congestion • Y.1731 for Layer 2 services is used to implement end-to-end connectivity detection, loopback detection, and link trace. It
network traffic bursts, which improves user experience and prevents service quality deterioration from network • TWAMP sends simulated service flows to detect the quality of the network, and is characterized by its easy
To stabilize the traffic bust, enhance Graphical O & M, visualized service quality
throughput
Pairing with the abundant OAM functions of the device the U2000 and uTraffic provides the following benefits:
• User-friendly graphical management windows for device management, service configuration, and routine maintenance
★ High-Quality Service, High-Reliability
• Periodic online reports for the operation quality of E-line services in graphical format
Network
Hardware Redundancy, Wide TemperatureRange • Portal management page for VIP E-line customers, allowing VIP customers to better maintain and monitor services
and E-line networks
The device use high-quality industrial components and advanced heat dissipation design. It can operate anywhere at
10 ms and a fast switchover can be triggered. Various OAM protocols, such as Y.1731, RFC 2544 and BFD for
Visual service performance Portal management page
everything, also ensure high-reliability running of the network.
The device use built-in NP chips, developed by Huawei, to deploy service through microcode programming without
requiring hardware replacement, which could save investments. The devices can also evolve to SDN, which shortens the
technological innovation cycle and accelerates the launch speed of new service, helping customers build flexible and
V V V V
V V V V
scalable networks. V V V V
Forward
S S control
S S S S S S slice
S S S S
SegmentRouting 1 2 2 2 1 2
1 1
3 3 3 3
Simplify tunnel technology, provide L2/L3 service more efficiently, maintain more easily. Support link and node protection
MCE/DGW /
with 100% highly FRR.It can also adjust the flow to improve the network load efficiency. M EC
5G-U P mM TC CP/UP
releasing between different sites’ Layer2 network from data layer to control layer. EVPN reduces the cost of network
deployment, simplifies the service configuration and qualifies higher flow transmission and lower sourceconsumption. FlexE FlexE mMTC slice
VxLAN
An virtual Ethernet based on physical IP network. By encapsulating broadcast packet using IP multicast, it can leap layer3 FlexE gains lots of support as a nextgeneration Ethernet technology , satisfy requirement of 5
G network slice,forward and isolation.
network and Isolate physical and logic network. Users can lay out their own logic network without modifying the physical
network. It makes the network expansible without physical position restriction. It is deployed flexibly, used with high 1980~2000 2000~ 2015~
Telecom network
efficiency, and can save link broadband. reliability slice
Flexible Ethernet comes from OIF(Optical Internetworking Forum),which proposed this Interface physical layer Key Unfixed length OAM,protection switch,clock Time slice interface,port binding
technology encapsulation/statistic multiplex
standard, is an interface technology about service isolating and network slice.It can divide some Eth ports binding
together into different sub interfaces to provide more agile speed. Typical LAN, industry area network Metro network,3G/4G 5G slice,time sensitive service
scene bearer,dedicated line
FlexE slice makes the network qualify the feature of not only single time slice, but also statistic multiplexing. Services
between slices don’ t affect each other. It supports differential bearer service. To achieve network slice architecture, and
Typical Switch Router Router
bear unified allservice. equipment
• 4 channels GE/FE electrical interface card Interface capability • Six service boardslots;
• Maximum interface capacity on the device:
• 4 channels GE/FE optical interface card 100GE: 2,50GE: 4,10GE:36,GE:112,FE:48,E1:128
CWDM • 8-Channel Multiplexing & Demultiplexing Card Voltage • DC: -72V to -38.4V,AC: 100V to 220V
CPOS • 4 channels channelized OC-3c/STM-1c POS optical interfacecard Weight • 5.22 kg (dual controlboards,no cards)
50GE/100GE • 2 channels 50GE/1 channel 100GE optical interface card(QSFP28) Humidity • Long term: 10% RH to 90% RH, non-condensing
• 1channel 100GE optical interface card(CFP2) • Short term: 5% RH to 95% RH, non-condensing
• 1 channel 50GE optical interface card(QSFP28)
Trademark Notice
, HUAWEI, and aretrademarks or registeredtrademarks of Huawei TechnologiesCo.,Ltd.
Other trademarks, product, service and company names mentionedarethepropertyof theirrespective owners.
General Disclaimer
The information in this document may contain predictive statements including,
without limitation, statements regarding thefuturefinancial and operating results,
futureproduct portfolio, new technology,etc.Therearea number of factors that
could cause actual results and developments to differ materially from those
expressed or implied in the predictive statements. Therefore, such information is
provided for reference purpose only and constitutes neither an offer nor an
acceptance. Huawei may change theinformation at any time without notice.