Académique Documents
Professionnel Documents
Culture Documents
Today’s construction projects demand the highest quality With our strategic network of well-stocked warehouses
standards and at Nucor Grating, we deliver. Nucor Grating and fabrication facilities, our products are always readily
is proud to be your first choice in the North American available. The friendly and knowledgeable staff in our sales,
grating market. engineering, and drafting departments can take your
requirements from structural drawings to detailed grating
Our reputation for superior quality and service has rewarded drawings and on to completely fabricated, ready-to-install
us with the privilege of being specified on many of North grating. As we are both a manufacturer and fabricator,
America’s largest capital projects. Our products may be we offer our customers complete “One Source” responsibility
found around the world in industrial sectors such as oil for all their grating needs.
and gas production, mining, water and wastewater
treatment, power generation, as well as a wide variety Whether supplying trench grating covers, stair treads,
of architectural applications. elevated platforms or catwalks, from the floor up, you can
count on Nucor Grating to supply durable and reliable
We lead the industry with a commitment to continuous products. We thank you for your continued support in making
improvement in our safety and quality standards. We are Nucor Grating your #1 choice for grating.
ISO 9001:2008 certified and our steel grating products
count towards credits under the Leadership in Energy
and Environmental Design (LEED) green building program.
Paramount to all of our product designs is safety. At Nucor
Grating we believe that safety is not just a goal, but a
lifestyle. By promoting healthy and safe living beyond the
workplace, our successful team takes pride in achieving
outstanding safety track records both on and off the job.
This pride is apparent in the products we create and services
we offer our customers.
Warranty
We warrant all goods of our manufacture to be free from defects caused by faulty material or poor
workmanship and will at our option repair or replace, without charge, or allow credit for any such
goods found on examination by us to be defective under normal use and service within one year
from date of shipment to the buyer, provided we are promptly notified in writing upon discovery
of such defects. Goods shall not be returned to us without our consent in writing.
This warranty does not cover damage caused by improper installation, overloading, accident, neglect
or harmful alterations, or repairs made by others. The buyer’s remedies with respect to defective
goods shall be exclusively limited as above provided.
31 Pultruded FRP
Standard Mesh
From mezzanines, platforms, catwalks, and stairs to fences,
benches, racking shelves, and ventilation covers, Tru-Weld
Steel Bar Grating is by no means limited to the industrial
applications for which it was originally designed.
bar grating
custom fabrication
Nucor Grating is a full service grating supplier. All of our
products are available in either stock panels, or fully
fabricated to suit your individual requirements. Examples of
fabrication include:
• Cutting to size
• Providing cutouts for penetrations in grating panels
• Welding banding, kick plate, or nosings to grating
Standard Mesh
how to order
Tru-Weld Bar Grating standard clearances
When ordering or specifying Tru-Weld Bar Grating,
please confirm:
Standard Mesh
• Grating surface – serrated or plain top
• Finish – unpainted, shop primer, or hot dip galvanized
• Style and quantity of fasteners, if required.
bar grating
• Area to be covered and method of support
• Dimensions – indicate whether your dimensions
take clearances into account
• Indicate any banding, kick plate, or nosing requirements
• Shipping and tagging instructions
Standard Practices
Standard quantity measurements for invoicing
Invoicing area or net area for grating ordered to specific
dimensions without drawings will be based on length
by width of each panel, with no deductions for cutouts. load table information
For grating supplied from a drawing, the invoicing area The load table calculations used throughout this catalogue are
shall be on the basis of gross floor area measured out based on “single span” condition. The dimensions shown are
to out of grating, with no deductions for clearances. for a clear, unsupported span.
Field measurement
The Seller shall not be responsible for the actual dimensions
of construction work in the field, but shall be responsible for
the accurate fabrication of grating and treads in accordance
with plans and specifications, if applicable.
manufacturing tolerances
Standard Mesh
Bar grating
Stair tread
Standard Mesh
Tread with aluminum abrasive nosing
(Special order)
bar grating
Cast aluminum abrasive nosings offer maximum slip resistance
on the leading edge of the tread.
METRIC LEGEND
U = Safe Uniform Load (kPa)
Standard Mesh
U 30.24 19.32 13.44 9.87 7.56 5.97 4.84 4.00 3.36 deflection is the maximum deflection to give
D 1.89 2.96 4.26 5.79 7.57 9.58 11.82 14.31 17.03 pedestrian comfort, but can be exceeded
25 x 3.2 24.6 3540
C 9.22 7.37 6.14 5.27 4.61 4.10 3.69 3.35 3.07 for other types of loads at the discretion of
D 1.51 2.36 3.41 4.64 6.05 7.66 9.46 11.45 13.62 the engineer.
U 45.36 29.03 20.16 14.81 11.34 8.96 7.26 6.00 5.04
D 1.89 2.96 4.26 5.79 7.57 9.58 11.82 14.31 17.03 For serrated surface, increase depth by one size.
25 x 4.8 35.3 38.4 5330
C 13.83 11.06 9.22 7.90 6.91 6.14 5.53 5.03 4.61
D 1.51 2.36 3.41 4.64 6.05 7.66 9.46 11.45 13.62
U 47.25 30.24 21.00 15.43 11.81 9.33 7.56 6.25 5.25 4.47 3.86
D 1.51 2.36 3.41 4.64 6.05 7.66 9.46 11.45 13.62 15.99 18.54
32 x 3.2 29.9 33.0 5560
C 14.40 11.52 9.60 8.23 7.20 6.40 5.76 5.24 4.80 4.43 4.11
D 1.21 1.89 2.72 3.71 4.84 6.13 7.57 9.16 10.90 12.79 14.83
U 70.88 45.36 31.50 23.14 17.72 14.00 11.34 9.37 7.88 6.71 5.79
D 1.51 2.36 3.41 4.64 6.05 7.66 9.46 11.45 13.62 15.99 18.54
32 x 4.8 43.3 46.4 8310
C 21.60 17.28 14.40 12.34 10.80 9.60 8.64 7.86 7.20 6.65 6.17
D 1.21 1.89 2.72 3.71 4.84 6.13 7.57 9.16 10.90 12.79 14.83
U 68.04 43.55 30.24 22.22 17.01 13.44 10.89 9.00 7.56 6.44 5.55 4.84 4.25 3.77 3.36
D 1.26 1.97 2.84 3.86 5.04 6.39 7.88 9.54 11.35 13.32 15.45 17.74 20.18 22.78 25.54
38 x 3.2 35.3 38.4 8000
C 20.74 16.59 13.83 11.85 10.37 9.22 8.30 7.54 6.91 6.38 5.93 5.53 5.18 4.88 4.61
D 1.01 1.58 2.27 3.09 4.04 5.11 6.31 7.63 9.08 1.66 12.36 14.19 16.14 18.22 20.43
U 102.03 65.32 45.36 33.33 25.52 20.16 16.33 13.50 11.34 9.66 8.33 7.26 6.38 5.65 5.04
D 1.26 1.97 2.84 3.86 5.04 6.39 7.88 9.54 11.35 13.32 15.45 17.74 20.18 22.78 25.54
38 x 4.8 51.3 54.4 11960
C 31.11 24.89 20.74 17.78 15.55 13.83 12.44 11.31 10.37 9.57 8.89 8.30 7.78 7.32 6.91
D 1.01 1.58 2.27 3.09 4.04 5.11 6.31 7.63 9.08 10.66 12.36 14.19 16.14 18.22 20.43
U 138.92 88.91 61.74 45.36 34.73 27.44 22.23 18.37 15.44 13.15 11.34 9.88 8.68 7.69 6.86
D 1.08 1.69 2.43 3.31 4.32 5.47 6.76 8.18 9.73 11.42 13.24 15.20 17.63 19.53 21.89
45 x 4.8 59.4 62.5 16290
C 42.34 33.87 28.23 24.20 21.17 18.82 16.94 15.40 14.11 13.03 12.10 11.29 10.59 9.96 9.41
D 0.86 1.35 1.95 2.65 3.46 4.38 5.41 6.54 7.78 9.13 10.59 12.16 13.84 15.62 17.51
U 181.44 116.12 80.64 59.25 45.36 35.84 29.03 23.99 20.16 17.18 14.81 12.90 11.34 10.05 8.96
D 0.95 1.48 2.13 2.90 3.78 4.79 5.91 7.15 8.51 9.99 11.59 13.30 15.13 17.09 19.16
51 x 4.8 67.4 70.6 21290
C 55.30 44.24 36.87 31.60 27.65 24.58 22.12 20.11 18.43 17.02 15.80 14.75 13.83 13.01 12.29
D 0.76 1.18 1.70 2.32 3.03 3.83 4.73 5.72 6.81 7.99 9.27 10.64 12.11 13.67 15.32
U 229.64 146.97 102.06 74.98 57.41 45.36 36.74 30.37 25.52 21.74 18.75 16.33 14.35 12.71 11.34
D 0.84 1.31 1.89 2.58 3.36 4.26 5.26 6.36 7.57 8.88 10.30 11.82 13.45 15.19 17.03
57 x 4.8 75.4 78.6 26940
C 69.99 55.99 46.66 40.00 35.00 31.11 28.00 25.45 23.33 21.54 20.00 18.66 17.50 16.47 15.55
D 0.67 1.05 1.51 2.06 2.69 3.41 4.20 5.09 6.05 7.10 8.24 9.46 10.76 12.15 13.62
U 283.50 181.44 126.00 92.57 70.88 56.00 45.36 37.49 31.50 26.84 23.14 20.16 17.72 15.70 14.00
D 0.76 1.18 1.70 2.32 3.03 3.83 4.73 5.72 6.81 7.99 9.27 10.64 12.11 13.67 15.32
64 x 4.8 83.5 86.7 33250
C 86.41 69.13 57.61 49.38 43.21 38.41 34.56 31.42 28.80 26.59 24.69 23.04 21.60 20.33 19.20
D 0.61 0.95 1.36 1.85 2.42 3.06 3.78 4.58 5.45 6.39 7.42 8.51 9.69 10.93 12.26
Tru-Weld grating meets N.A.A.M.M. standards. *All weights will increase by 5% when galvanized.
IMPERIAL LEGEND
U = Safe Uniform Load (lbs./ft.2)
Standard Mesh
C = Safe Concentrated Load (lbs./foot of grating width)
D = Deflection (inches)
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 18,000 P.S.I.
bar grating
U 632 404 281 206 158 125 101 84 70
deflection is the maximum1/4” deflection
deflection is the
to give maximumcomfort,
pedestrian deflection
but to
can
D 0.074 0.116 0.168 0.228 0.298 0.370 0.466 0.563 0.670 give pedestrian comfort, but can be exceeded
1 x 1/8 5.03 be exceeded for other types of loads at the discretion of the engineer. 0.216
C 632 505 421 361 316 281 253 230 211 for other types of loads at the discretion of
D 0.060 0.093 0.134 0.182 0.238 0.302 0.372 0.451surface,
For serrated 0.536increase depth by one size.
the engineer.
U 947 606 421 309 237 187 152 125 105
D 0.074 0.116 0.168 0.228 0.298 0.377 0.466 0.563 0.670 For serrated surface, increase depth by one size.
1 x 3/16 7.23 7.87 0.325
C 947 758 632 541 474 421 379 344 316
D 0.060 0.093 0.134 0.182 0.238 0.302 0.372 0.451 0.536
U 987 632 439 322 247 195 158 130 110 93 81
D 0.060 0.093 0.134 0.182 0.238 0.302 0.372 0.451 0.536 0.629 0.730
1 1/4 x 1/8 6.12 6.76 0.339
C 987 789 658 564 493 439 395 359 329 304 282
D 0.048 0.074 0.107 0.146 0.191 0.241 0.298 0.360 0.429 0.504 0.584
U 1480 947 658 483 370 292 237 196 164 140 121
D 0.060 0.093 0.134 0.182 0.238 0.302 0.372 0.451 0.536 0.629 0.730
1 1/4 x 3/16 8.87 9.51 0.507
C 1480 1184 987 846 740 658 592 538 493 455 423
D 0.048 0.074 0.107 0.146 0.191 0.241 0.298 0.360 0.429 0.504 0.584
U 1421 909 632 464 355 281 227 188 158 135 116 101 89 79 70
D 0.050 0.078 0.112 0.152 0.199 0.251 0.310 0.376 0.447 0.524 0.608 0.698 0.794 0.897 1.006
1 1/2 x 1/8 7.23 7.87 0.488
C 1421 1137 947 812 711 632 568 517 474 437 406 379 355 334 316
D 0.040 0.062 0.089 0.122 0.159 0.201 0.248 0.300 0.358 0.420 0.487 0.559 0.636 0.718 0.804
U 2132 1364 947 696 533 421 341 282 237 202 174 152 133 118 105
D 0.050 0.078 0.112 0.152 0.199 0.251 0.310 0.376 0.447 0.524 0.608 0.698 0.794 0.897 1.006
1 1/2 x 3/16 10.51 11.15 0.730
C 2132 1705 1421 1218 1066 947 853 775 711 656 609 568 533 502 474
D .0040 0.062 0.089 0.122 0.159 0.201 0.248 0.300 0.358 0.420 0.487 0.559 0.636 0.718 0.804
U 2901 1857 1289 947 725 573 464 384 322 275 237 206 181 161 143
D 0.043 0.067 0.096 0.130 0.170 0.215 0.266 0.322 0.383 0.450 0.521 0.599 0.681 0.769 0.862
1 3/4 x 3/16 12.17 12.81 0.994
C 2901 2321 1934 1658 1451 12859 1161 1055 967 893 829 774 725 683 645
D 0.034 0.053 0.077 0.104 0.136 0.172 0.273 0.257 0.306 0.360 0.417 0.479 0.545 0.615 0.689
U 3789 2425 1684 1237 947 749 606 501 421 359 309 269 237 210 187
D 0.037 0.058 0.084 0.114 0.149 0.189 0.233 0.282 0.335 0.393 0.456 0.524 0.596 0.673 0.754
2 x 3/16 13.81 14.45 1.299
C 3789 3032 2326 2165 1895 1684 1516 1378 1263 1166 1083 1011 947 892 842
D 0.030 0.047 0.067 0.091 0.119 0.151 0.186 0.225 0.268 0.315 0.365 0.419 0.477 0.538 0.603
U 4796 3069 2132 1566 1199 947 767 634 533 454 392 341 300 266 237
D 0.033 0.052 0.074 0.101 0.132 0.168 0.207 0.250 0.298 0.350 0.406 0.466 0.530 0.598 0.670
2 1/4 x 3/16 15.45 16.09 1.644
C 4796 3837 3197 2741 2398 2132 1918 1744 1599 1476 1370 1279 1199 1128 1066
D 0.026 0.041 0.060 0.081 0.106 0.134 0.166 0.200 0.238 0.280 0.324 0.372 0.424 0.478 0.536
U 5921 3789 2632 1933 1480 1170 947 783 658 561 483 421 370 328 292
D 0.030 0.047 0.067 0.091 0.119 0.151 0.186 0.225 0.268 0.315 0.365 0.419 0.477 0.538 0.603
2 1/2 x 3/16 17.11 17.75 2.029
C 5921 4737 3947 3383 2961 2632 2386 2153 1974 1822 1692 1579 1480 1393 1316
D 0.024 0.037 0.054 0.073 0.095 0.121 0.149 0.180 0.215 0.252 0.292 0.335 0.381 0.431 0.483
Tru-Weld grating meets N.A.A.M.M. standards. *All weights will increase by 5% when galvanized.
Stainless Steel Grade Load/Deflection multiply carbon steel load tables by: BASED ON MAXIMUM ALLOWABLE FIBRE STRESS
U 1.111
304
C 1.111 20,000 P.S.I. (137.9 MPa)
Stainless Steel
D 1.151
U 0.917
304L
C 0.917 16,500 P.S.I. (113.8 MPa)
Stainless Steel
D 0.949
U 1.111
316
C 1.111 20,000 P.S.I. (137.9 MPa)
Stainless Steel
D 1.151
U 0.917
316L
C 0.917 16,500 P.S.I. (113.8 MPa)
Stainless Steel
D 0.949
Special Mesh
standard 4” cross rod spacing but 2” cross rod spacing
is available.
Close Mesh
Advantages of the close mesh grating style include close mesh wide mesh
greatly increased load bearing capabilities and prevention
of fall through by dangerous objects such as heavy tools
or equipment accidentally dropped from above.
Wide Mesh
bar grating
Wide mesh grating options are designed for applications
requiring additional openness of bar grating to minimize
buildup of snow, ice, or other debris.
X
Type 18 Metric # of close mesh standard wide mesh
ADA Compatible with 4.8mm bars Bars mesh
TYPE 18 TYPE 24 TYPE 30 TYPE 41 TYPE 48 TYPE 60
Multiply load values by 1.72 as per METRIC METRIC METRIC METRIC METRIC METRIC
table on page 12. 2 22 28 35 46 52 65
Special Mesh
3 40 52 65 87 100 125
4 57 76 95 129 148 186
5 75 100 125 170 195 246
6 92 124 156 211 243 306
Type 24 Metric 7 110 148 186 252 291 367
Multiply load values by 1.25 as per 8 127 171 216 294 338 427
9 144 195 246 335 386 487
table on page 12. 10 162 219 276 381 433 548
11 179 243 306 418 481 608
12 197 267 337 459 529 668
13 214 291 367 500 576 729
Bar grating
special mesh
special close mesh
Deflections as per table
on page 13. IMPERIAL Panel width in INCHES
X
(For 3/16” bearing bars)
Type 11 # of close mesh standard wide mesh
ADA Compatible with 3/16” bars Bars mesh
TYPE TYPE TYPE TYPE TYPE TYPE
Multiply load values by 1.72 as per 11 15 19 26 30 38
table on page 13. 2 7/8 1 1/8 1 3/8 1 27/32 2 1/16 2 9/16
Special Mesh
3 1 9/16 2 1/16 2 9/16 3 15/32 3 15/16 4 15/16
4 2 1/4 3 3 3/4 5 3/32 5 13/16 7 5/16
5 2 15/16 3 15/16 4 15/16 6 23/32 7 11/16 9 11/16
6 3 5/8 4 7/8 6 1/8 8 11/32 9 9/16 12 1/16
Type 15 7 4 5/16 5 13/16 7 5/16 9 31/32 11 7/16 14 7/16
Multiply load values by 1.25 as per 8 5 6 3/4 8 1/2 11 19/32 13 5/16 16 13/16
9 5 11/16 7 11/16 9 11/16 13 7/32 15 3/16 19 3/16
table on page 13. 10 6 3/8 8 5/8 10 7/8 14 27/32 17 1/16 21 9/16
11 7 1/16 9 9/16 12 1/16 16 15/32 18 15/16 23 15/16
12 7 3/4 10 1/2 13 1/4 18 3/32 20 13/16 26 5/16
13 8 7/16 11 7/16 14 7/16 19 23/32 22 11/16 28 11/16
bar grating
special wide mesh 14 9 1/8 12 3/8 15 5/8 21 11/32 24 9/16 31 1/16
15 9 13/16 13 5/16 16 13/16 22 31/32 26 7/8 33 7/16
Deflections as per table 16 10 1/2 14 1/4 18 24 19/32 28 5/16 35 13/16
on page 13. 17 11 3/16 15 3/16 19 3/16 26 7/32 30 3/16
18 11 7/8 16 1/8 20 3/8 27 27/32 32 1/16
Type 26 19 12 9/16 17 1/16 21 9/16 29 15/32 33 15/16
Multiply load values by 0.73 as per 20 13 1/4 18 22 3/4 31 3/32 35 13/16
21 13 15/16 18 15/16 23 15/16 32 23/32
table on page 13.
22 14 5/8 19 7/8 25 1/8 34 11/32
23 15 5/16 20 13/16 26 5/16 35 31/32
24 16 21 3/4 27 1/2
25 16 11/16 22 11/16 28 11/16
26 17 3/8 23 5/8 29 7/8
27 18 1/16 24 9/16 31 1/16
28 18 3/4 25 1/2 32 1/4
Type 30 29 19 7/16 26 7/16 33 7/16
Multiply load values by 0.63 as per 30 20 1/8 27 3/8 34 5/8
table on page 13. 31 20 13/16 28 5/16 35 13/16
32 21 1/2 29 1/4
33 22 3/16 30 3/16
34 22 7/8 31 1/8
35 23 9/16 32 1/16
36 24 1/4 33
37 33 15/16
38 34 7/8
Type 38 39 35 13/16
Multiply load values by 0.50 as per 40
table on page 13. 41
32 x 4.8 86.62 72.46 75.53 53.80 56.78 43.31 46.43 33.74 n/a 28.37 30.86 23.83 26.32
38 x 3.2 70.55 58.64 61.71 43.75 46.73 35.30 38.43 27.49 n/a 23.19 25.68 19.58 22.02
38 x 4.8 102.63 86.27 89.40 65.62 70.21 51.31 54.44 39.94 n/a 34.23 37.35 28.81 31.93
44 x 4.8 119.18 100.58 103.65 76.07 80.66 59.42 62.54 46.14 n/a 40.67 44.87 34.27 38.52
51 x 4.8 135.34 114.49 117.57 86.27 90.86 67.43 70.55 52.34 n/a 45.90 50.09 38.57 42.82
57 x 4.8 150.48 127.53 130.65 95.84 100.43 75.43 78.56 58.59 n/a 50.78 54.98 42.62 46.82
64 x 4.8 166.64 141.49 144.57 106.05 110.64 83.54 86.66 64.74 n/a 55.95 60.20 46.92 51.12
size (inches) TYPE 9.5-2 TYPE 11-4 TYPE 11-2 TYPE 15-4 TYPE 15-2 TYPE 19-4 TYPE 19-2 TYPE 26-4 TYPE 26-2 TYPE 30-4 TYPE 30-2 TYPE 38-4 TYPE 38-2
3/4 x 3/16 11.14 9.15 9.79 6.86 7.46 5.58 6.22 n/a n/a 3.69 4.20 3.14 3.64
1 x 1/8 10.05 8.21 8.84 6.17 6.78 5.03 5.67 3.93 n/a 3.33 3.84 2.84 3.34
1 x 3/16 14.45 12.01 12.64 8.75 9.56 7.23 7.87 5.63 n/a 4.75 5.26 4.01 4.51
1 1/4 x 1/8 12.24 10.10 10.73 7.56 8.17 6.12 6.76 4.78 n/a 4.04 4.54 3.42 3.92
1 1/4 x 3/16 17.74 14.84 15.47 11.02 11.63 8.87 9.51 6.91 n/a 5.81 6.32 4.88 5.39
1 1/2 x 1/8 14.45 12.01 12.64 8.96 9.57 7.23 7.87 5.63 n/a 4.75 5.26 4.01 4.51
1 1/2 x 3/16 21.02 17.67 18.31 13.44 14.38 10.51 11.15 8.18 n/a 7.01 7.65 5.90 6.54
1 3/4 x 3/16 24.41 20.60 21.23 15.58 16.52 12.17 12.81 9.45 n/a 8.33 9.19 7.02 7.89
2 x 3/16 27.72 23.45 24.08 17.67 18.61 13.81 14.45 10.72 n/a 9.40 10.26 7.90 8.77
2 1/4 x 3/16 30.82 26.12 26.76 19.63 20.57 15.45 16.09 12.00 n/a 10.40 11.26 8.73 9.59
2 1/2 x 3/16 34.13 28.98 29.61 21.72 22.66 17.11 17.75 13.26 n/a 11.46 12.33 9.61 10.47
RailROAD Grating
Tru-Weld Steel Railroad Grating is special wide mesh Type 26-4
(Type 41-102 Metric) with bearing bars supplied serrated for
additional safety. It was originally designed specifically for
use as brake steps, running boards, walkways, and platforms
on railcars and locomotives. Railroad Grating is supplied as
standard AAR (Association of American Railroads) approved
welded bar grating with bar spacing at 1 5/8” centers and
cross rods at 4” centers.
Heavy Duty
Tru-Weld Heavy Duty Steel Bar Grating is commonly used for
floor trench and sump covers exposed to heavy equipment
traffic. It is used extensively throughout mining, power
generation, highways, airfields, and on truck terminal loading
docks and ramps. It is suitable for large single span conditions
or where grating must support extreme loads.
bar grating
would be minimized.
METRIC LEGEND
U = Safe Uniform Load (kPa)
C = Safe Concentrated Load (kN/metre of grating width)
Heavy Duty
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 137.9 MPa.
All metric dimensions are based on a “soft” conversion.
bearing Approx. Load/ Span in millimetres (mm) SECtion
bar size Weight (kg/m2) Deflection modulus
(mm) TYPE TYPE PER 305mm
30-102 30-51 305 457 610 762 914 1067 1219 1372 1524 1676 1829 1981 2134 2286 2438 OF WIDTH
U 268 120 67 43 30 22 17 13 11 9 7 6 5 5 4
25 x 6.4 47.0 51.3 6900
C 41 27 20 16 14 12 10 9 8 7 7 6 6 5 5
U 403 179 101 65 45 33 25 20 16 13 11 10 8 7 6
25 x 9.5 68.0 72.7 10350
C 61 41 31 25 20 18 15 14 12 11 10 9 9 8 8
Bar grating
Tru-Weld grating meets N.A.A.M.M. standards. *All weights will increase by 5% when galvanized.
IMPERIAL LEGEND
U = Safe Uniform Load (lbs./ft.2)
C = Safe Concentrated Load (lbs./foot of grating width)
Heavy Duty
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 20,000 P.S.I.
bar grating
U 8773 3899 2193 1404 975 716 548 433 351 290 244 208 179 156 137
1 1/4 x 1/4 11.6 12.7 0.675
C 4387 2924 2193 1755 1462 1253 1097 975 877 798 731 675 627 585 548
U 13160 5849 3290 2106 1462 1074 823 650 526 435 366 311 269 234 206
1 1/4 x 3/8 17.1 18.2 1.009
C 6580 4387 3290 2632 2193 1880 1645 1462 1316 1196 1097 1012 940 877 823
U 12627 5612 3157 2020 1403 1031 789 624 505 417 351 299 258 224 197
1 1/2 x 1/4 13.8 14.9 0.972
C 6313 4209 3157 2525 2104 1804 1578 1403 1263 1148 1052 971 902 842 789
U 18947 8421 4737 3031 2105 1547 1184 936 758 626 526 448 387 337 296
1 1/2 x 3/8 20.4 21.5 1.453
C 9473 6316 4737 3789 3158 2707 2368 2105 1895 1722 1579 1457 1353 1263 1184
U 17187 7639 4297 2750 1910 1403 1074 849 687 568 477 407 351 306 269
1 3/4 x 1/4 16.0 17.1 1.323
C 8593 5729 4297 3437 2864 2455 2148 1910 1719 1562 1432 1322 1228 1146 1074
U 25787 11461 6447 4126 2865 2105 1612 1273 1031 852 716 610 526 458 403
1 3/4 x 3/8 23.7 24.8 1.978
C 12893 8596 6447 5157 4298 3684 3223 2865 2579 2344 2149 1984 1842 1719 1612
U 22453 9979 5613 3593 2495 1833 1403 1109 898 742 624 531 458 399 351
2 x 1/4 18.3 19.4 1.728
C 11227 7484 5613 4491 3742 3208 2807 2495 2245 2041 1871 1727 1604 1497 1403
U 33680 14969 8420 5389 3742 2749 2105 1663 1347 1113 936 797 687 599 526
2 x 3/8 27.0 28.1 2.583
C 16840 11227 8420 6736 5613 4811 4210 3742 3368 3062 2807 2591 2406 2245 2105
U 28427 12634 7107 4548 3159 2321 1777 1404 1137 940 790 673 580 505 444
2 1/4 x 1/4 20.5 21.6 2.700
C 14213 9476 7107 5685 4738 4061 3553 3159 2843 2584 2369 2187 2030 1895 1777
U 42627 18945 10657 6820 4736 3480 2664 2105 1705 1409 1184 1009 870 758 666
2 1/4 x 3/8 30.1 31.3 4.036
C 21313 14209 10657 8525 7104 6090 5328 4736 4263 3875 3552 3279 3045 2842 2664
U 35093 15597 8773 5615 3899 2865 2193 1733 1404 1160 975 831 716 624 548
2 1/2 x 1/4 22.7 23.8 2.700
C 17547 11698 8773 7019 5849 5013 4387 3899 359 3190 2924 2699 2507 2340 2193
U 52627 23390 13157 8420 5847 4296 3289 2599 2105 1740 1462 1246 1074 936 822
2 1/2 x 3/8 33.6 34.7 4.036
C 26313 17542 13157 10525 8771 7518 6578 5847 5263 4784 4386 4048 3759 3508 3289
U 50520 22453 12630 8083 5613 4124 3158 2495 2021 1670 1403 1196 1031 898 789
3 x 1/4 27.1 28.2 3.889
C 25260 16840 12630 10104 8420 7217 6315 5613 5052 4593 4210 3886 3609 3368 3158
U 75787 33683 18947 12126 8421 6187 4737 3743 3031 2505 2105 1794 1547 1347 1184
3 x 3/8 40.1 41.2 5.813
C 37893 25262 18947 15157 12631 10827 9473 8421 7579 6890 6316 5830 5413 5052 4737
U 68773 30566 17193 11004 7641 5614 4298 3396 2751 2273 1910 1628 1404 1223 1075
3 1/2 x 1/4 31.5 32.6 5.293
C 34387 22924 17193 13755 11462 9825 8597 7641 6877 6252 5731 5290 4912 4585 4298
U 103160 45849 25790 16506 11462 8421 6448 5094 4126 3410 2866 2442 2105 1834 1612
3 1/2 x 3/8 46.7 47.8 7.911
C 51580 34387 25790 20632 17193 14737 12895 11462 10316 9378 8597 7935 7369 6877 6448
U 89827 39923 22457 14372 9981 7333 5614 4436 3593 2969 2495 2126 1833 1597 1404
4 x 1/4 38.6 39.7 7.000
C 44913 29942 22457 17965 14971 12832 11228 9981 8983 8166 7486 6910 6416 5988 5614
U 134733 59881 33683 21557 14970 10999 8421 6653 5389 4454 3743 3189 2750 2395 2105
4 x 3/8 56.1 57.2 10.446
C 67367 44911 33683 26947 22456 19248 16842 14970 13473 12248 11228 10364 9624 8982 8421
Tru-Weld grating meets N.A.A.M.M. standards. *All weights will increase by 5% when galvanized.
Deflections as per table on page 20. Dimensions shown are out to out of bearing bars. All metric dimensions are based on a “soft” conversion.
metric Panel width in millimetres
# of close mesh standard mesh wide mesh wide mesh wide mesh
Bars Type HD-24 Metric Type HD-30 Metric Type HD-35 Metric Type HD-48 Metric Type HD-60 Metric
6mm 9.5mm 6mm 9.5mm 6mm 9.5mm 6mm 9.5mm 6mm 9.5mm
BAR BAR BAR BAR BAR BAR BAR BAR BAR BAR
2 30 n/a 37 40 41 44 54 57 67 70
3 54 n/a 67 70 76 79 102 105 127 130
4 78 n/a 97 100 111 114 149 152 187 191
5 102 n/a 127 130 146 149 197 200 248 251
Bar grating
6 125 n/a 157 160 181 184 244 248 308 311
7 149 n/a 187 191 216 219 292 295 368 371
8 173 n/a 217 221 251 254 340 343 429 432
9 197 n/a 248 251 286 289 387 391 489 492
10 221 n/a 278 281 321 324 435 438 549 552
11 244 n/a 308 311 356 359 482 486 610 613
12 268 n/a 338 341 391 394 530 533 670
13 292 n/a 368 371 425 429 578 581 730
14 316 n/a 398 402 460 464 625 629 791
15 340 n/a 429 432 495 499 673 851
16 364 n/a 459 462 530 534 721 911
17 387 n/a 489 492 565 569 768
18 411 n/a 519 522 600 604 816
19 435 n/a 549 552 635 864
20 458 n/a 579 582 670 911
21 483 n/a 610 613 705
22 506 n/a 640 740
23 530 n/a 670 775
24 554 n/a 700 810
25 578 n/a 730 845
26 602 n/a 760 879
27 791 914
28 821
29 851
30 881
31 911
Heavy Duty
Deflections as per table on page 21. Dimensions shown are out to out of bearing bars.
imperial Panel width in inches
# of close mesh standard mesh wide mesh wide mesh wide mesh
Bars Type HD-15 Type HD-19 Type HD-22 Type HD-30 Type HD-38
1/4 3/8 1/4 3/8 1/4 3/8 1/4 3/8 1/4 3/8
BAR BAR BAR BAR BAR BAR BAR BAR BAR BAR
2 1 3/16 n/a 1 7/16 1 9/16 1 5/8 1 3/4 2 1/8 2 1/4 2 5/8 2 3/4
3 2 1/8 n/a 2 5/8 2 3/4 3 3 1/8 4 4 1/8 5 5 1/8
4 3 1/16 n/a 3 13/16 3 15/16 4 3/8 4 1/2 5 7/8 6 7 3/8 7 1/2
5 4 n/a 5 5 1/8 5 3/4 5 7/8 7 3/4 7 7/8 9 3/4 9 7/8
bar grating
6 4 15/16 n/a 6 3/16 6 5/16 7 1/8 7 1/4 9 5/8 9 3/4 12 1/8 12 1/4
7 5 7/8 n/a 7 3/8 7 1/2 8 1/2 8 5/8 11 1/2 11 5/8 14 1/2 14 5/8
8 6 13/16 n/a 8 9/16 8 11/16 9 7/8 10 13 3/8 13 1/2 16 7/8 17
9 7 3/4 n/a 9 3/4 9 7/8 11 1/4 11 3/8 15 1/4 15 3/8 19 1/4 19 3/8
10 8 11/16 n/a 10 15/16 11 1/16 12 5/8 12 3/4 17 1/8 17 1/4 21 5/8 21 3/4
11 9 5/8 n/a 12 1/8 12 1/4 14 14 1/8 19 19 1/8 24 24 1/8
12 10 9/16 n/a 13 5/16 13 7/16 15 3/8 15 1/2 20 7/8 21 26 3/8
13 11 1/2 n/a 14 1/2 14 5/8 16 3/4 16 7/8 22 3/4 22 7/8 28 3/4
14 12 7/16 n/a 15 11/16 15 13/16 18 1/8 18 1/4 24 5/8 24 3/4 31 1/8
15 13 3/8 n/a 16 7/8 17 19 1/2 19 5/8 26 1/2 33 1/2
16 14 5/16 n/a 18 1/16 18 3/16 20 7/8 21 28 3/8 35 7/8
17 15 1/4 n/a 19 1/4 19 3/8 22 1/4 22 3/8 30 1/4
18 16 3/16 n/a 20 7/16 20 9/16 23 5/8 23 3/4 32 1/8
19 17 1/8 n/a 21 5/8 21 3/4 25 34
20 18 1/16 n/a 22 13/16 22 15/16 26 3/8 35 7/8
21 19 n/a 24 24 1/8 27 3/4
22 19 15/16 n/a 25 3/16 29 1/8
23 20 7/8 n/a 26 3/8 30 1/2
24 21 13/16 n/a 27 9/16 31 7/8
25 22 3/4 n/a 28 3/4 33 1/4
26 23 11/16 n/a 29 15/16 34 5/8
27 31 1/8 36
28 32 5/16
29 33 1/2
30 34 11/16
31 35 7/8
aluminum information
Fisholow® Rectangular
and I-Bar Grating
Aluminum Standard Mesh
i-bar
bar grating
aluminum Tread with aluminum
abrasive nosing (Special order)
The optional cast aluminum abrasive nosing offers a superior
slip resistance on the leading edge of the tread.
End Plate Width and Hole Pattern Dimensions
# of TREAD WIDTH “A” dimension “B” dimension
Bars (Type 19-4 Only) (Outer Slot) (Inner Slot)
METRIC IMPERIAL METRIC IMPERIAL METRIC IMPERIAL
(mm) (inches) (mm) (inches) (mm) (inches)
5 157 6 3/16 64 2 1/2 n/a n/a
6 187 7 3/8 114 4 1/2 n/a n/a
7 217 8 9/16 114 4 1/2 n/a n/a
8 248 9 3/4 178 7 114 4 1/2
9 278 10 15/16 178 7 114 4 1/2
10 308 12 1/8 178 7 114 4 1/2 Note: Bolts for mounting to stringers are not included.
maximum recommended tread lengths • Type, bar size, and surface of grating
• Type of nosing – corrugated angle nosing is standard
bearing maximum lenth of tread • Width of tread
bar size (Type 19-4 Only)
• Length of tread
Plain Serrated
• Number of treads
METRIC IMPERIAL METRIC IMPERIAL METRIC IMPERIAL
(mm) (inches) (mm) (ft. & in.) (mm) (ft. & in.)
• Shipping and tagging instructions
25 x 4.8 1 x 3/16 710 2’ 4” – –
32 x 4.8 1 1/4 x 3/16 860 2’ 10” 790 2’ 7” Example: Nucor Grating Fisholow treads, c/w 1 1/4” x 3/16”
38 x 4.8 1 1/2 x 3/16 1070 3’ 6” 970 3’ 2” serrated rectangular-bar aluminum bar grating, corrugated
44 x 4.8 1 3/4 x 3/16 1300 4’ 3” 1170 3’ 10”
angle nosing and standard end plates, 12 1/8” wide x 30” long,
Note: 1/8” (3.2mm) bearing bar not recommended. 150 pcs, tagged “Project ABC”.
METRIC LEGEND
U = Safe Uniform Load (kPa)
C = Safe Concentrated Load (kN/metre of grating width)
D = Deflection (mm)
Loads and deflections given in this table are theoretical and are based on a maximum allowable fibre stress of 82.82 MPa.
All metric dimensions are based on a “soft” conversion. For Fisholow I-bar loading, use the equivalent depth 4.8mm bar size values in this load table.
bearing Approx. Load/ Span in millimetres (mm) SECtion
bar size Weight (kg/m2) Deflection modulus
(mm) PER 305mm
610 762 914 1067 1219 1372 1524 1676 1829 1981 2134 2286 2438 2591 2743 OF WIDTH
U 20.16 12.90 8.96 6.58 5.04 3.98
D 3.66 5.72 8.23 11.20 14.63 18.52 Spans and loads in the pink shaded area exceed a deflection of 6mm for
25 x 3.2 9.37 3.54
C 6.14 4.92 4.10 3.51 3.07 2.73 uniform loads of 5kPa. Experience has shown that 6mm deflection is the
D 2.93 4.57 6.58 8.96 11.70 14.81 maximum deflection to give pedestrian comfort, but can be exceeded for
Bar grating
U 30.24 19.35 13.44 9.87 7.56 5.97 other types of loads at the discretion of the engineer.
D 3.66 5.72 8.23 11.20 14.63 18.52
25 x 4.8 13.28 For serrated surface, increase depth by one size. 5.33
C 9.22 7.37 6.14 5.27 4.61 4.10
D 2.93 4.57 6.58 8.96 11.70 14.81
U 31.50 20.16 14.00 10.29 7.88 6.22 5.04 4.17 3.50
D 2.93 4.57 6.58 8.96 11.70 14.81 18.29 22.13 26.33
32 x 3.2 11.28 5.55
C 9.60 7.68 6.40 5.49 4.80 4.27 3.84 3.49 3.20
D 2.34 3.66 5.27 7.17 9.36 11.85 14.63 17.70 21.07
U 47.25 30.24 21.00 15.43 11.81 9.33 7.56 6.25 5.25 4.47 3.86
D 2.93 4.57 6.58 8.96 11.70 14.81 18.29 22.13 26.33 30.91 35.84
32 x 4.8 16.16 8.31
C 14.40 11.52 9.60 8.23 7.20 6.40 7.68 65.24 4.80 4.43 4.11
D 2.34 3.66 5.27 7.17 9.36 11.85 14.63 17.70 21.07 24.73 28.68
U 45.36 29.03 20.16 14.81 11.34 8.96 7.26 6.00 5.04 4.29 3.70 3.23 2.84 2.51 22.24
D 2.44 3.81 5.49 7.47 9.75 12.34 15.24 18.44 21.95 25.76 29.87 34.29 39.01 44.04 49.38
38 x 3.2 13.28 8.00
C 13.83 11.06 9.22 7.90 6.91 6.14 5.53 5.03 4.61 4.25 3.95 3.69 3.46 3.25 3.07
D 1.95 3.05 4.39 5.97 7.80 9.88 12.19 14.75 17.56 20.60 23.90 27.43 31.21 35.23 39.50
U 68.04 43.55 30.24 22.22 17.01 13.44 10.89 9.00 7.56 6.44 5.55 4.84 4.25 3.77 3.36
D 2.44 3.81 5.49 7.47 9.75 12.34 15.24 18.44 21.95 25.76 29.87 34.29 39.01 44.04 49.38
38 x 4.8 18.99 11.96
C 20.74 16.59 13.83 11.85 10.37 9.22 8.30 5.03 6.91 6.38 5.93 5.53 5.18 4.88 4.61
D 1.95 3.05 4.39 5.97 7.80 9.88 12.19 14.75 17.56 20.60 23.90 27.43 31.21 35.23 39.50
U 92.61 59.27 41.16 30.24 23.15 18.29 14.82 12.25 10.29 8.77 7.56 6.59 5.79 5.13 4.57
D 2.09 3.27 4.70 6.40 8.36 10.58 13.06 15.81 18.81 22.08 25.60 29.39 33.44 37.75 42.32
45 x 4.8 21.87 16.29
C 28.23 22.58 18.82 16.13 14.11 12.55 11.29 10.26 9.41 8.69 8.07 7.53 7.06 6.64 6.27
D 1.67 2.61 3.76 5.12 6.69 8.46 10.45 12.64 15.05 17.56 20.48 23.51 26.75 30.20 33.86
U 120.96 77.41 53.76 39.50 30.24 23.89 19.35 15.99 13.44 11.45 9.87 8.60 7.56 6.70 5.97
D 1.83 2.86 4.11 5.60 7.32 9.26 11.43 13.83 16.46 19.32 22.40 25.72 29.26 33.03 37.03
51 x 4.8 24.80 21.29
C 36.87 29.50 24.58 21.07 18.43 16.39 14.75 13.41 12.29 11.34 10.53 9.83 9.22 8.68 8.19
D 1.46 2.29 3.29 4.48 5.85 7.41 9.14 11.06 13.17 15.45 17.92 20.57 23.41 26.43 29.63
U 153.09 97.98 68.04 49.99 38.27 30.24 24.49 20.24 17.01 14.49 12.50 10.89 9.57 8.48 7.56
D 1.63 2.54 3.66 4.98 6.50 8.23 10.16 12.29 14.63 17.17 19.91 22.86 26.01 29.36 32.92
57 x 4.8 27.73 26.94
C 46.66 37.33 31.11 26.66 23.33 20.74 18.66 16.97 15.55 14.36 13.33 12.44 11.67 10.98 10.37
D 1.30 2.03 2.93 3.98 5.20 6.58 8.13 9.83 11.70 13.74 15.93 18.29 20.81 23.49 26.33
U 189.00 120.96 84.00 61.71 47.25 37.33 30.24 24.99 21.00 17.89 15.43 13.44 11.81 10.46 9.33
D 1.46 2.29 3.29 4.48 5.85 7.41 9.14 11.06 13.17 15.45 17.92 20.57 23.41 26.43 29.63
64 x 4.8 30.61 33.25
C 57.61 46.09 38.41 32.92 28.80 25.60 23.04 20.95 25.60 17.73 16.46 15.36 14.40 13.55 12.80
D 1.17 1.83 2.63 3.58 4.68 5.93 7.32 8.85 10.53 12.36 14.34 16.46 18.73 21.14 23.70
size (mm) TYPE 18-102 TYPE 24-102 TYPE 30-102 TYPE 48-102 TYPE 60-102
25 x 6 n/a 11.47 9.03 5.96 4.98
32 x 6 n/a 13.96 11.18 7.37 6.15
38 x 6 n/a 16.11 12.84 8.59 7.18
45 x 6 n/a 18.21 14.50 9.86 8.54
51 x 6 n/a 20.26 16.11 11.91 9.18
57 x 6 n/a 22.80 18.99 12.74 10.64
64 x 6 n/a 23.29 19.48 13.04 10.89
bar grating
U 632 404 281 206 158 125 be exceeded for other types of loads at the discretion of the engineer.
D 0.144 0.225 0.324 0.441 0.576 0.729
1 x 3/16 2.72 For serrated surface, increase depth by one size. 0.325
C 632 505 421 361 316 281
D 0.115 0.18 0.259 0.353 0.461 0.583
U 658 421 292 215 164 130 105 87 73
D 0.115 0.18 0.259 0.353 0.461 0.583 0.720 0.871 1.037
1 1/4 x 1/8 2.31 0.339
C 658 526 439 376 329 292 263 239 219
D 0.092 0.144 0.207 0.282 0.369 0.467 0.576 0.697 0.829
U 987 632 439 322 247 195 158 130 110 93 81
D 0.115 0.18 0.259 0.353 0.461 0.583 0.720 0.871 1.037 1.217 1.411
1 1/4 x 3/16 3.31 0.507
C 987 789 658 564 493 439 395 359 329 304 282
D 0.092 0.144 0.207 0.282 0.369 0.467 0.576 0.697 0.829 0.973 1.129
U 947 606 421 309 237 187 152 125 105 90 77 67 59 52 47
D 0.096 0.150 0.216 0.294 0.384 0.486 0.600 0.726 0.864 1.014 1.176 1.35 1.536 1.734 1.944
1 1/2 x 1/8 2.72 0.488
C 947 758 632 541 474 421 379 344 316 291 271 253 237 223 211
D 0.077 0.120 0.173 0.235 0.307 0.389 0.480 0.581 0.691 0.811 0.941 1.08 1.229 1.387 1.555
U 1421 909 632 464 355 281 227 188 158 135 116 101 89 79 70
D 0.096 0.15 0.216 0.294 0.384 0.486 0.6 0.726 0.864 1.014 1.176 1.35 1.536 1.734 1.944
1 1/2 x 3/16 3.89 0.730
C 1421 1137 947 812 711 632 568 517 474 437 406 379 355 334 316
D 0.077 0.12 0.173 0.235 0.307 0.389 0.48 0.581 0.691 0.811 0.941 1.08 1.229 1.387 1.555
U 1934 1238 860 632 484 382 309 256 215 183 158 138 121 107 96
D 0.082 0.129 0.185 0.252 0.329 0.417 0.514 0.622 0.741 0.869 1.008 1.157 1.317 1.486 1.666
1 3/4 x 3/16 4.48 0.994
C 1934 1547 1289 1105 967 860 774 703 645 595 553 516 484 455 430
D 0.066 0.103 0.148 0.202 0.263 0.333 0.411 0.498 0.592 0.695 0.806 0.926 1.053 1.189 1.333
U 2526 1617 1123 825 632 499 404 334 281 239 206 180 158 140 125
D 0.072 0.113 0.162 0.221 0.288 0.365 0.45 0.545 0.648 0.761 0.882 1.013 1.152 1.301 1.458
2 x 3/16 5.08 1.299
C 2526 2021 1684 1444 1263 1123 1011 919 842 777 962 674 632 594 561
D 0.058 0.09 0.13 0.176 0.263 0.292 0.36 0.436 0.518 0.608 0.706 0.81 0.922 1.04 1.166
U 3197 2046 1421 1044 799 632 512 423 355 303 261 227 200 177 158
D 0.064 0.100 0.144 0.196 0.256 0.324 0.400 0.484 0.576 0.676 0.784 0.900 1.024 1.156 1.296
2 1/4 x 3/16 5.68 1.644
C 3197 2558 2132 1827 1599 1421 1279 1163 1066 984 1218 1137 799 752 711
D 0.051 0.080 0.115 0.157 0.205 0.259 0.320 0.387 0.461 0.541 0.627 0.720 0.819 0.925 1.037
U 3947 2526 1754 1289 987 780 632 522 439 374 322 281 247 219 195
D 0.058 0.090 0.130 0.176 0.230 0.292 0.360 0.436 0.518 0.608 0.706 0.81 0.922 1.04 1.166
2 1/2 x 3/16 6.28 2.029
C 3947 3158 2632 2256 1974 1754 1579 1435 1316 1215 1128 1053 987 929 877
D 0.046 0.072 0.104 0.141 0.184 0.233 0.288 0.348 0.415 0.487 0.564 0.648 0.737 0.832 0.933
size (inches) TYPE 11-4 TYPE 15-4 TYPE 19-4 TYPE 30-4 TYPE 38-4
1 x 1/4 n/a 2.35 1.85 1.22 1.02
1 1/4 x 1/4 n/a 2.86 2.29 1.51 1.26
1 1/2 x 1/4 n/a 3.30 2.63 1.76 1.47
1 3/4 x 1/4 n/a 3.73 2.97 2.02 1.75
2 x 1/4 n/a 4.15 3.30 2.24 1.88
2 1/4 x 1/4 n/a 4.67 3.89 2.61 2.18
2 1/2 x 1/4 n/a 4.77 3.99 2.67 2.23
Type 24 Type 15
Multiply load values by 1.25 as per Multiply load values by 1.25 as per
table on page 26. table on page 27.
Bar grating
For panel widths, see steel panel width charts located on pages 16 and 17. All types of aluminum bar grating available up to
3 feet (915mm) nominal width.
*Stocked at most warehouses in dark grey color, grit top or smooth top.
Molded FRP
Panel size Approx. Approx. bearing bar size Cross bar size Top surface % open area
feet Weight shipping inches (mm) inches (mm)
(mm) lbs./ft.2 weight WIDTH SPACE C-C WIDTH SPACE C-C
(kg/m2) lbs. (kg)
1” Rectangular Mesh
4’ x 12’ 3.1 149 5/16 1 5/16 4 Plain or
59%
(1220 x 3658) (15.13) (67.5) (8) (25) (8) (100) Grip Top
3’ x 10’ 3.1 93 5/16 1 5/16 4 Plain or
59%
(915 x 3048) (15.13) (42) (8) (25) (8) (100) Grip Top
1” Square Mesh
FRP grating
4’ x 12’ 2.5 120 1/4 1 1/2 1/4 1 1/2 Plain or
70%
(1220 x 3658) (12.2) (55) (6) (38) (6) (38) Grip Top
3’ x 10’ 2.5 75 1/4 1 1/2 1/4 1 1/2 Plain or
70%
(915 x 3048) (12.2) (34) (6) (38) (6) (38) Grip Top
1 1/2” Square Mesh
4’ x 12’ 3.7 180 1/4 1 1/2 1/4 1 1/2 Plain or
70%
(1220 x 3658) (18.1) (82) (6) (38) (6) (38) Grip Top
3’ x 10’ 3.7 111 1/4 1 1/2 1/4 1 1/2 Plain or
70%
(915 x 3048) (18.1) (50) (6) (38) (6) (38) Grip Top
2” Square Mesh
4’ x 12’ 4 192 1/4 2 1/4 2 Plain or
72%
(1220 x 3658) (19.53) (87) (6) (51) (6) (51) Grip Top
are offered in a variety of bar profiles and spacings, including Class 1:25 or less.
close mesh options that are designed for non-motorized wheel
Standard panel sizes are 4’ x 20’ (1219mm x 6096mm),
traffic and ADA compliance.
however custom panel sizes are available.
please confirm:
• Type
• Resin
• Color
part Approx. “X” Dimension “Y” Dimension % open
number Weight OPen space Load Bar Centers area
• Top Surface
• Sheet Size
METRIC IMperial metric IMperial metric IMperial
(kg/m2) (lbs./ft.2) (mm) (inches) (mm) (inches)
Example: Nucor Grating Pultruded FRP I-6015
I-BAR 1” Deep
I-4010 17.57 3.60 10 0.4 25 1.0 40%
(I-bar 60% open, 1 1/2” deep), Vinyl Ester resin
I-5010 14.74 3.02 15 0.6 30 1.2 50% (Chemical Grade, Fire Retardant), dark grey, grit top,
I-6010 11.37 2.33 23 0.9 38 1.5 60% standard 4’ x 20’ sheets
I-BAR 1 1/4” Deep
I-4012 18.40 3.77 10 0.4 25 1.0 40%
I-6012 13.03 2.67 23 0.9 38 1.5 60% load table information
I-BAR 1 1/2” Deep
I-4015 21.97 4.50 10 0.4 25 1.0 40% Load Tables Available Upon Request
I-5015 18.16 3.72 15 0.6 30 1.2 50%
I-6015 16.11 3.30 23 0.9 38 1.5 60%
SELF-DRILLING/SELF-TAPPING SCREW
grating fastening methods
For close mesh Type 11 and Type 9.5 grating, a square collared
This combination allows for fastening grating without drilling
clamping bolt can be inserted directly between the ends of the
into the supports. The Type D Saddle Clip holds the grating
bearing bars and fitted through a bottom clamp. The rounded
from the top as the bottom clamp is tightened under the
bolt head rests directly on the bearing bars eliminating the
flange of the supporting member. Designed for use with
need for a top saddle clip.
Tru-Weld Type 19 and Type 15 bar grating only (in 1/8” and
3/16” bar sizes). Available by special order in bare steel, galvanized, and
stainless steel.
Available in standard galvanized or bare steel and stainless
steel options.
Illinois Ontario
1115 E 5000 N Road ISO 9001-2008 Certified
Bourbonnais, Il 60914 750 Appleby Line
Tel: 1-815-614-2527 PO Box 5025
Burlington, ON L7R 3Y8
Kentucky Tel: 905-632-2121
6900 Houston Road Fax: 905-632-6295
Building 500, #8
Florence, KY 41042 Alberta
Tel: 859-282-7767 17527 - 107 Avenue
Fax: 859-282-7702 Edmonton, AB T5S 1E5
Tel: 780-481-3941
Mississippi Fax: 780-481-3967
211 Industrial Drive
Madison, MS 39110 4609 - 64 Avenue
Tel: 1-800-334-2047 Wetaskiwin, AB T9A 2G4
Tel: 1-800-268-6277
Pennsylvania
2000 Corporate Drive, Suite 400 British Columbia
Wexford, PA 15090 19511 - 92 Avenue
Tel: 724-934-5320 Surrey, BC V4N 4G6 Proud member of N.A.A.M.M.
Fax: 724-934-5350 Tel: 604-888-0911
Nucor Grating reserves the right to improve all
Fax: 604-888-0383
product designs and modify or change information
17 W 2nd Street in this publication without notice. The symbols ®
Bethlehem, PA 18015 Quebec designate Canadian and United States of America
Tel: 1-800-334-2047 12450 Boul. Industriel registered trade-mark status. The following are
trade-marks of Nucor Grating/Fisher & Ludlow:
Fax: 724-934-5350 Montreal (P.A.T.), QC H1B 5M5
Tru-Weld, Flowforge and Fisholow. Nucor Grating/
Tel: 514-640-5085 Fisher & Ludlow has additional registered trade-marks
Fax: 514-640-1115 in Canada and the United States of America.