Académique Documents
Professionnel Documents
Culture Documents
,_.
~
'.
~ ..•.""'=' '
~-:,,-:!:
- L'lJ
•. .-~
' .... Q
.
shall be free of defects in materials and workmanship for one (1) year from the first to occur of (i) the date the '-0
Heating elements, because of their susceptibility to overheating and contamination, must be returned to the
BARNSTEAD factory and if, upon inspection, it is concluded that failure is due to factors other than excessive
high temperature or contamination, BARNSTEAD will provide warranty replacement. As a condition to the
return of any product, or any constituent part thereof, to BARNSTEAD's factory, it shall be sent prepaid and a
prior written authorization from BARNSTEAD assigning a Return Goods Number to the product or part shall
be obtained.
IN NO EVENT SHALL BARNSTEAD BE LIABLE TO ANY PARTY FOR ANY DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR FOR ANY DAMAGES RESULTING FROM LOSS OF
USE OR PROFITS, ANTICIPATED OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THE
SALE, USE OR PERFORMANCE OF ANY PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CON-
TRACT, TORT (INCLUDING NEGLIGENCE), ANY THEORY OF STRICT LIABILITY OR REGULATORY Model # TOR Plate Size Voltage Series
ACTION. SP46615 4" x 4" 120 1066
SP46610 4" x 4" 240 1066
The name of the authorized Barnstead International dealer nearest you may be obtained by calling 1-800- SP4661 0-33 4" X4" 230 1066
446-6060 (563-556-2241) or writing to: SP46614 4" x 4" 100 1066
SP46925 TxT 120 1069
SP46920 T' x 7" 240 1069
• Barnsteadlnternational
.Ap.p~ Your Lab Starts Here
EOI
9001
SP46920-33
SP46924
SP47235
7" x 7"
7" x 7"
12" x 12"
230
100
120 (20 amp cord set)
1069
1069
1072
LTl072Xl • 12113101
Table of Contents .( (
( (
c (
2 15
. ( Safety Information
[]i. .
- -
Note
This manual contains important operating and
safety information. The user must carefully
Notes alert you to pertinent facts read and understand the contents of this
and conditions. manual prior to the use of this equipment.
JA Hot Surface
Hot surfaces alert you to a Warnings
To avoid electrical shock, always:
( ( possibility of personal injury if you
come in contact with a surface 1. Use a properly grounded electrical
during use or for a period of time outlet of correct voltage and current
after use. handling capacity.
14 3
SAFETY INFORMATION
, ( Ordering Procedures
damaged by etching, scratching or chip- Please refer to the Specification Plate for the complete model number, serial number, and
ping. A damaged top can break in use. series number when requesting service, replacement parts or in any correspondence con-
cerning this unit.
4. Do not use metal foil on hot plate. Do
not use sand bath, metal containers or All parts listed herein may be ordered from the Barnstead International dealer from whom
other insulating material on the stirring you purchased this unit or can be obtained promptly from the factory. When service or
hot plate - Top plate can be damaged replacement parts are needed we ask that you check first with your dealer. If the dealer
and shock hazard can exist. cannot handle your request, then contact our Customer Service Department at
563-556-2241 or 800-553-0039.
5. Do not remove or modify grounded
power plug. Use only properly grounded Prior to returning any materials to Barnsteadllnternational Corp., please contact our
outlets to avoid shock hazard. Not rated Customer Service Department for a "Return Goods Authorization" number (RGA). Material
for use in hazardous atmospheres. Returned without an RGA number will be returned.
\. \
4 13
EXPLODED VIEW SAFETY INFORMATION
. (
Warning
THIS PRODUCT CONTAINS REFRACTORY CERAMIC, REFRACTORY CERAMIC FIBER
OR FIBERGLASS (GLASS WOOL) INSULATION WHICH CAN PRODUCE RESPIRABLE
FIBERS AND DUST WHEN HANDLED. THESE FIBERS OR DUSTS CAN CAUSE IRRITA-
TION AND CAN AGGRAVATE PRE-EXISTING RESPIRATORY DISEASE. REFRACTO-
RY CERAMIC INSULATIONS MAY CONTAIN OR MAY FORM CRYSTALLINE SILICA
(CRYSTOBALlTE) WHICH MAY CAUSE LUNG DAMAGE (SILICOSIS).
The insulating materials are located in the door, the hearth collar, in the chamber of the
product or the top plate assembly. Tests performed by the manufacturer indicate that there
( is no significant risk of exposure to dust or respirable fibers resulting from operation of this
equipment under normal conditions. However, there may be a risk of exposure to respirable
dusts or fibers when repairing or maintaining the insulating materials, or when otherwise
disturbing the materials in a manner which causes release of dust or fibers therefrom.
Through the use of proper handling procedures you can work safely with these insulating
materials and minimize any exposure. Accordingly, before you repair or replace any insulat-
ing materials, or perform any other servicing on this product which could disturb or cause
exposure to dust from insulating materials, you should consult the appropriate Material
Safety Data Sheets (MSDS's) for such products with respect to proper handling and appro-
priate protective equipment. For additional MSDS's, or additional information concerning
the handling of refractory ceramic products, please contact the Customer Service
Department of Barnstead International Corporation at 1-800-446-6060 or 1-800-553-0039.
12 5
Specifications , ( Exploded View
[li--
Environmental Conditions
Operating: 1 rc to 27°C; 20% to 80% relative --
humidity, non-condensing. Note
Installation category II (overvolt- See Replacement Parts
age) in accordance with IEC 664. list for replacement fuse 11
Pollution degree 2 in accordance on 230V CE model.
with lEG 664.
Altitude Limit: 2,000 meters.
Storage: -25°C to 65°C
10% to 85% relative humidity
EMC: EN 50081-1
EN 50082-1
Safety: EN 61010-2-010
l c
6 11
Replacement Parts . ( ( Introduction
\. "
10
7
Operation ( ( Maintenance
& Warning
Gross weight of items placed on
Some shifting of motor bearings may have
occurred during shipping and handling. Prior to
first use, the stirrer should be run at maximum
General Cleaning Instructions
Wipe exterior surfaces with lightly dampened
top of Hot Plates should not speed for 10 minutes to realign the motor cloth containing mild soap solution.
exceed 251bs. (11.4 kg.) on the bearings.
7" x 7" and 12" x 12" models,
and 10 Ibs. (4.5 kg.) on the Both the temperature and speed controls are
4" x 4" model. combination ON/OFF switches and setting
selectors.
Refer servicing to qualified per-
sonnel.
8 Caution
When turning the control OFF,
comes complete with a stir bar that is coated
with Teflon Fluorocarbon Resin.*
8 9