Académique Documents
Professionnel Documents
Culture Documents
Department of Education
Region I
Schools Division of Ilocos Norte
LUZONG NATIONAL HIGH SCHOOL
Pagudpud
Prepared by:
RONEL P. CONSTANTINO
Subject Teacher
Checked by:
ZHORAIDA B. ARINGAY
Guidance Counselor-Designate
Approved by:
1. This is commonly known as the physical equipment that makes up the computer system.
a. Hardware b. Mouse c. Printer d. Software
2. It is the brain of the computer where most of the “computing” takes place.
a. CPU b. Disk drive c. Hardware d. Monitor
3. This is the main purpose of the left mouse button.
a. To execute a command c. To serve as abort button
b. To repeat the last command d. To serve as pick button
4. The set of programs, and other related applications associated with a computer system.
a. Disk drive c. Printer
b. Hardware d. Software
5. Of the following software’s, which is not an application software?
a. Adobe Photoshop c. Flash
b. AutoCAD d. Windows 8
6. Which of the following options is not a type of workspaces?
a. 2d drafting & annotation c. 3d modeling
b. My workspace d. AutoCAD classic
7. What do you call the drawing editing tool which rotates objects or groups of objects based on a center of
rotation and angle.
a. Trim b. Rotate c. Orbit d. Pan
8. Which command is used to change the size of an existing objects?
a. Move b. Rotate c. Scale d. Zoom
9. Which command can be used to create a new text style (TS) and modify the existing ones?
a. Dtext b. Mtext c. Text d. Style
10. What is the complex object composed of two or more lines, curves, or arcs which have contiguous
endpoints?
a. Polyline b. Line c. Arc d. Polygon
11. With a hot grip you can perform these editing tasks.
a. Move b. Offset c. Rotate d. Scale
12. Which of the following statements below clearly describe the form of cursor?
a. The cursor may appear as crosshairs or another symbol based on which command is active.
b. The cursor may appear as crosshairs.
c. The cursor is a symbol based on which command is active.
d. The cursor is a symbol which is use to point certain text of a document.
13. What is the default file extension of an AutoCAD drawing?
a. Dwg b. Dwf c. Dws d. Dwt
14. Which keystrokes will UNDO a command?
a. Control + U c. Control + C
b. Control + Z d. Control + P
15. Which keystrokes will UNDO a command?
a. Alt + U b. Alt + Z c. Control + U d. Control + Z
16. Which of the following dimensioning commands is shown in the drawing?
a. Dimaligned
b. Dimangular
c. Dimlinear
d. Qleader
17. What do you call the primitive entity defined by two endpoints.
a. Angle b. Line c. Distance Base point d. Radius
18. What is the drawing editing command which causes one object to end exactly at another?
a. Stretch b. Circle c. Trim d. Fillet
19. Which of the following commands is used for editing to move some of the points which defines and
object and leave others?
a. Stretch b. Trim b. Snap to grid d. Tangent
20. What command is used to highlight all?
a. Control + U c. Control + C
b. Control + Z d. Control + P
21. The following are the categories of CAD or Computer-Aided Design except?
a. CAD is used to design and develop products, these can be goods used by end consumers or
intermediate goods used in other products.
b. CAD is not extensively used in the design of tools and machinery used in the manufacture of
components.
c. CAD is used throughout the engineering process from conceptual design and layout, through
detailed engineering and analysis of components to definition of manufacturing methods.
d. CAD software is used to create plans and construction drawings.
22. Which of these choices in a CAD Software can an designer do?
a. Switch between two-dimensional (2D) and three-dimensional (3D) views.
b. Zoom in and out for close-up and distant views.
c. Rotate images to view them from different perspectives.
d. All of these
23. What do call the arc that connects endpoints of two intersecting lines or objects and often a rounded
corner?
a. Chamfer b. Fillet c. Line d. Curve
24. It is a complex object composed of three or more straight lines in a closed figure?
a. Polyline b. Multiline c. Polygon d. Move
25. Chamfer It is a diagonal line which connects points on two intersecting objects such as an angled
corner.
a. Chamfer b. Fillet c. Line d. Curve
26. Rotate It is a drawing editing tool which rotates objects or groups of objects based on a center of rotation
and angle.
a. Array b. Mirror c. Rotate d. Orbit
27. Which of the following commands is used for editing to move some of the points which defines and
object and leave others?
a. Stretch b. Trim c. Snap to grid d. Tangent
28.It is a complex object composed of two or more lines, curves, or arcs which have contiguous endpoints.
a. Array b. Mirror c. Polyline d. Orbit
29. Zoom It is the way the view is changed by magnifying or reducing the image on the screen.
a. Chamfer b. Polar c. Array d. Zoom
30. What command that allows you to draw an arc of a circle?
a. Curve b. Arc c. Trim d. Circle
31. The command that allows you to mirror selected objects in your drawing by picking them and then
defining the position of an imaginary mirror line using two points.
a. Line b. Trim c. Reflect d. Mirror
32. What command that makes multiple copies of selected objects in a rectangular matrix (columns and
rows) or a polar (circular) pattern.
a. Chamfer b. Polar c. Array d. Zoom
33. A command that works in a similar way to the copy command except that no copy is made, the selected
object(s) is simply moved from one location to another.
a. Move b. Stretch c. Trim d. Array
34. What command is a very useful tool that allows you to draw an arc between two intersecting lines or
adjacent polyline segments?
a. Curve b. Arc c. Trim d. Fillet
35. Which tool bar is used to create new objects?
a. Drawing toolbar c. Object Snap Tool Bar
b. Modifying toolbar d. Zoom Toolbar
36. Which statement best describes the use of a dimension tool bar?
a. It is used to produce clear and concise measured drawings.
b. It shows clear edges of the object drawn.
c. It emphasizes direction.
d. It shows exact length.
37. Which statement best explains the difference between 2D and 3d Polyline?
a. The 3D Polyline command works almost the same with Polyline command.
b. In normal (2D) polylines, all vertexes must have the same Z value, while the 3D polyline objects
are not as complex as their 2D cousins.
c. 3D polyline objects are not as complex as their 2D cousins. However, they can be very useful for 3
modeling.
d. Both b and c statements.
38. Which technical term commonly used in computer refers to instruction?
a. Commands c. Drawing objects
b. Command sequence d. Line command
39. Which command is used for editing or in cutting extra lines in the drawing?
a. Line command c. construction lines command
b. Trim command d. multiline command
40. Which commands is used for inserting a point marker in the drawing at any co-ordinate location?
a. Line command c. drawing object command
b. Point command d. trim command
41. Which command is used to create new multiline styles?
a. Point command c. multiline command
b. Drawing object d. construction lines command
42.What is the purpose of an erasing shield?
a. To prevent tearing the drawing media
b. To avoid erasing nearby lines accidentally
c. To protect areas that you do not want to erase
d. All of the above are correct answers to the question
43. What are the three principal views of orthographic drawings?
a. Isometric, Perspective, Oblique c. CAD, ISO, ANSI
b. Top, Front, Side (End) d. Top, Bottom, Side
44. When using the TRIM command, which do you select first?
a. The cutting edges c. The object to be trimmed
b. Everything d. Nothing
45.How many points do you need to define for the rectangle command?
a. One b. Two c. Four d. None
46. If you draw a line at 270 degrees, where does it point to?
a. Up b. Down c. Left d. Right
47.What is the best way of drawing a rectangle?
a. By using the Line command b. By using the Rectangle command
c. By using the Polyline command d. By using the Multiline command
48. This room is generally located between the bedrooms.
a. Bathroom b. Dining area c. Kitchen d. Foyer
49. What is the part of the roof that projects over a wall?
a. Overhang b. Eave c. Fascia d. Gutter
50. What do you call the enclosed structure designed primarily to shelter an automobile?
a. Parking Area b. Garage c. Carport d. Porch
Prepared by:
RONEL P. CONSTANTINO
Subject Teacher
Checked by:
ZHORAIDA B. ARINGAY
Guidance Counselor-Designate
Approved by: