0 évaluation0% ont trouvé ce document utile (0 vote)
20 vues12 pages
1. The document discusses noise analysis of different circuit schematics (Cases A, B, C) by calculating corner frequency, total noise, and input referred noise at various frequencies.
2. It analyzes the noise contribution of different transistors (M1, M2, etc.) in various circuit schematics. The total noise and input referred noise is calculated along with the percentage contribution of each transistor.
3. Flicker and thermal noise values are provided for each transistor in different schematics. Total noise and input referred noise is computed along with the percentage noise contribution of each transistor.
1. The document discusses noise analysis of different circuit schematics (Cases A, B, C) by calculating corner frequency, total noise, and input referred noise at various frequencies.
2. It analyzes the noise contribution of different transistors (M1, M2, etc.) in various circuit schematics. The total noise and input referred noise is calculated along with the percentage contribution of each transistor.
3. Flicker and thermal noise values are provided for each transistor in different schematics. Total noise and input referred noise is computed along with the percentage noise contribution of each transistor.
1. The document discusses noise analysis of different circuit schematics (Cases A, B, C) by calculating corner frequency, total noise, and input referred noise at various frequencies.
2. It analyzes the noise contribution of different transistors (M1, M2, etc.) in various circuit schematics. The total noise and input referred noise is calculated along with the percentage contribution of each transistor.
3. Flicker and thermal noise values are provided for each transistor in different schematics. Total noise and input referred noise is computed along with the percentage noise contribution of each transistor.
CASE A 105.308 CASE B 22.3553 CASE C 3.76048 ANS 1c. QUE 2A
SCHEMATIC A SCHEMATIC B
Ans(a).
Spot noise @ 200MHz Case A(in V/sqrt(Hz)) Case B(in V/sqrt(Hz))
Total noise @ OUTPUT 11.70305*10^-8 10.72377*10^-8 due to Mn Total noise @ OUTPUT 6.303431*10^-8 10.720694*10^-8 due to Mp Input referred noise 4.68042*10^-09 8.92666*10^-09 QUE 2B
SCHEMATIC
Ans (a)
Spot noise @ 200MHz Noise (in v/sqrt(Hz)) % of total
Total noise @ OUTPUT 5.092583*10^-9 53.18 due to M1 Total noise @ OUTPUT 2.78737*10^-10 0.1 due to M2 Total noise @ OUTPUT 4.06899*10^-9 46.72 due to R Input referred noise 7.0707*10^-9 QUE 2C