Académique Documents
Professionnel Documents
Culture Documents
Section Properties
P P
y
20
THK
a
b P
x
w
Y
X
Height of the padeye = 280 mm
Height of the eye from top of the beam,h = 120 mm
Width of the padeye, w = 320 mm
Thickness of the padeye = 20 mm
Radius of the padeye = 160 mm
Hole diameter = 75 mm
Shackle diameter = 50 mm
Cross-sectional area
Padeye
Cross-sectional are Ag = 6400 mm2
STAAD input
Maximum sling forc P = 244.84 kN
Sling angle = 66.38 degrees
X component of P Px = 98.099768 kN
Y component of P Py = 224.32802 kN
Code checks
Check for Dimensions Condition Fig. C-D5.1
a = 122.5 mm a>1.33beff O.K
b = 122.5 mm
beff = 2t+16
= 56 mm beff<b O.K
w = 320 w>2beff+d O.K
= 896 kN
Фt = 0.75 [LRFD]
Apb = dpin x t
= 495 kN = 1000
Design strength= Фt*Pn Apb - Projected bearing area
= 371.25 kN
Pass ratio = 0.66
SELECTED SECTION IS SAFE IN BEARING
= 1435.699335 kN
Фt = 0.9 [LRFD]
Design strength= Фt*Pn
= 1292.129402 kN
Pass ratio = 0.19
SELECTED SECTION IS SAFE IN YIELDING
Bending Stress
= 21.748773 N/mm2
Allowable Bending Stress Fb = 0.66 * Fy
= 181.5 N/mm2
fb < Fb
SELECTED SECTION IS SAFE IN BENDING
10
Reqd.SizeS = 4.62 mm
Selected Size = 6 mm >S HENCE O.K
Padeye
ffener plates