Académique Documents
Professionnel Documents
Culture Documents
The below Release Notes can also be found in Pelco document C1014RN-A. However, this Tech Tip
has added an Addendum that has not yet been added to the document. The Addendum provides
information addressing how to change the Static IP Address for Endura NET5301T and NET5308T
Encoders when using DigitalSentry. The Addendum will be added to a future update to the document.
Please refer to this Tech Tip until the document has been updated when changing the Static IP
Address of an Endura Encoder.
RELEASE NOTES
Endura Encoders Supported on Digital Sentry
Digital Sentry digital video management systems (DVMS) provides support for Endura encoders. To
make use of this support, download version 4.2 from the Pelco Web site at:
http://www.pelco.com/software/downloads/
To obtain the latest information and documentation about Endura encoders, refer to the Pelco Web
site.
1. Plug the Endura encoder into a network switch.The encoder must be set to use DHCP.
2. Open the Pelco Device Utility as follows:
a.From the Windows Start menu, select Run to open a DOS command prompt.
B.Type the following command, and press Enter:
C:\Program Files\Pelco\Device Utility\PelcoDeviceUtility.exe
3. The Pelco Device Utility searches for the encoder IP address.
7. Choose Pelco for the type of IP camera.The IP Camera details screen appears (refer to Figure 4).
World Headquarters Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
3500 Pelco Way, Clovis, California 93612 USA Information subject to change without notice.
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 ©Copyright 2009, Pelco, Inc. All rights reserved.
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com Page 3 of 7 TT091023DS.fm
Tech Tips
Helpful Tips for Pelco Products
12. Select the Endura encoder. Preview video appears on the On Screen Display tab (refer to
Figure 5).
ADDENDUM
Changing Static IP Address for Endura Encoder (NET5301T and NET5308T) using DS
To change the Endura Encoder IP address for static, you must download the newest Endura Utilities
application.
1. To download Endura Utilities, please click this link:
http://productsupport.pelco.com/action.php?kt_path_info=ktcore.actions.document.view&fDocumentId=3376
Follow the on-screen instructions for installing the applications.
2. Open Endura Utilities.
World Headquarters Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
3500 Pelco Way, Clovis, California 93612 USA Information subject to change without notice.
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 ©Copyright 2009, Pelco, Inc. All rights reserved.
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com Page 4 of 7 TT091023DS.fm
Tech Tips
Helpful Tips for Pelco Products
World Headquarters Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
3500 Pelco Way, Clovis, California 93612 USA Information subject to change without notice.
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 ©Copyright 2009, Pelco, Inc. All rights reserved.
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com Page 5 of 7 TT091023DS.fm
Tech Tips
Helpful Tips for Pelco Products
7. Once the search is completed, you will notice the NET5301T under the model section left side.
8. Left Click the NET5301T encoder and notice you will receive information in the Group Tools area
on the right side.
9. Right Click Endura Basic Encoder on the right side and select Device Macros then Change IP
Address.
World Headquarters Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
3500 Pelco Way, Clovis, California 93612 USA Information subject to change without notice.
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 ©Copyright 2009, Pelco, Inc. All rights reserved.
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com Page 6 of 7 TT091023DS.fm
Tech Tips
Helpful Tips for Pelco Products
FIRMWARE DETAILS
NET5301T
NET5308T
World Headquarters Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
3500 Pelco Way, Clovis, California 93612 USA Information subject to change without notice.
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 ©Copyright 2009, Pelco, Inc. All rights reserved.
International Tel: 1-559/292-1981 Fax: 1-559/348-1120
www.pelco.com Page 7 of 7 TT091023DS.fm