Académique Documents
Professionnel Documents
Culture Documents
TRUE OR FALSE
MULTIPLE CHOICE
1. ___A___ enables a receiver to regulate the flow of data from a sender so that
the receiver's buffers do not overflow.
A) Flow control B) Link control C) Data control D) Error control
2. In a data link control protocol, __C__ control is achieved by retransmission of
damaged frames.
A) DLHC B) data C) error D) flow
3. The __D__ time is the time it takes for a bit to traverse the link between
source and destination.
A) relay B) flow C) transmission D) propagation
Berroa Larissa, 4-767-2042
Quisbert Isabel, 8-907-989
4. The transmission medium between systems is referred to as a __A__ when a
data link control protocol is used.
A) data link B) flow link C) transmission link D) control link
5. Data are sent in blocks called ___D__.
A) links B) units C) entities D) frames
6. The time it takes for a station to emit all of the bits of a frame onto the
medium is the ___D__ time.
A) link B) relay C) propagation D) transmission
7. The flow control in which the destination can stop the flow of data simply by
withholding acknowledgment of the receipt of a frame is __B_ flow control
A) data B) stop-and-wait C) frame acknowledgment D) ARQ
8. With ___B____ flow control the transmission link is treated as a pipeline that
may be filled with frames in transit.
A) linking B) sliding-window C) ARQ D) stop-and-wait
9. Each ___C___ includes a field that holds the sequence number of that frame
plus a field that holds the sequence number used for acknowledgment.
A) SAF B) window C) data frame D) relay frame
10. RR and RNR are examples of an ___A____.
A) error repair request B) acknowledgment frame C) open acknowledgment
frame D) interior window
11. The form of error control based on sliding-window flow control that is most
commonly used is __C__:
A) ACK-ARQ B) selective-reject ARQ C) go-back-N ARQ D) piggybacking
12. In the high level data link control frame structure the flag, address, and
control fields that precede the information field are known as a ___A____.
A) header B) trailer C) FAC D) ARQ
13. In the HDLC frame structure the FCS and flag fields following the data field
are referred to as a ___B____.
A) header B) trailer C) bit stuffing D) information frames
14. The flag field pattern is ___A____.
A) 01111110 B) 01111010 C) 00111110 D) 01111101
15. ___D___ provide the ARQ mechanism in HDLC when piggybacking is not used.
A) I-frames B) R-frames C) U-frames D) S-frames
SHORT ANSWER
1. The layer of control that provides error detection and error and flow control is
known as a ___data link control_____ protocol.
2. ____Error____ control is achieved by retransmission of damaged frames that have
not
been acknowledged or for which the other side requests a retransmission.
3. Containing virtually all of the features found in other data link control protocols,
____HDLC____ is a widely used data link control protocol.
4. A layer of logic is added above the physical layer to achieve necessary control.
This logic is referred to as a ___ data link control_____ protocol.
5. A technique for assuring that a transmitting entity does not overwhelm a
receiving entity with data is ___flow control_____.
Berroa Larissa, 4-767-2042
Quisbert Isabel, 8-907-989
6. The form of flow control where a source entity transmits a frame and must wait
until it receives an acknowledgment back from the destination entity before
sending the next frame is __stop and wait__ flow control.
7. The form of flow control where A and B are connected via a full-duplex link and A
maintains a list of sequence numbers that it is allowed to send without receiving
any acknowledgment and B maintains a list of sequence numbers that it is
prepared to receive is ___sliding window_____ flow control.
8. Most data link control protocols allow a station to cut off the flow of frames from
the other side by sending a ___RNR_____ message, which acknowledges former
frames but forbids transfer of future frames.
9. If two stations exchange data each needs to maintain two windows, one for
transmit and one for receive, and each side needs to send the data and
acknowledgments to the other. To provide efficient support for this requirement
a feature known as __piggybacking__ is typically provided.
10. _Error__ control refers to mechanisms that detect and correct errors that occur
in the transmission of frames.
11. With ___selective reject_ ARQ the only frames retransmitted are those that
receive a negative acknowledgment or those that time out.
12. The most important data link control protocol is ___HDLC_____.
13. Since there is no assurance that the flag field pattern will not appear somewhere
inside the frame, a procedure known as ___bit insertion_____ is used to prevent
destroying synchronization.
14. High level data link control defines three types of frames, each with a different
control field format. They are: information frames, unnumbered frames, and
___supervisory frames_____.
15. An error detecting code calculated from the remaining bits of the frame,
exclusive of flags, is the ___FCS_____.