Vous êtes sur la page 1sur 2

GLORIA UMALI NATIONAL HIGH SCHOOL

Ayusan II, Tiaong, Quezon


Second Quarter Examination
T.L.E 9

Name:__________________ Score:______________
Year & Section:___________ Date:______________

Test I
Multiple Choices. Choose the letter of the best answer. Write it on the blank provided before each
number.

__________1. These are small software programs that help the operating system use the device.
a. Application b. Driver c. Hardware d. OS
__________2. Which of the following is software shared on a small memory chip on the motherboard?
a. Installer b. Application c. Driver d. BIOS
__________3. It is the way to set up a system or the assortment of components that make up the
system.
a. Configuration b. Set up c. Driver d. Installation
__________4. If you see a message to press any key to boot the CD and you fail to do so, what do you
think will happen?
a. The computer will restart b. Set up inspecting your system will appear c. It will be prompted to
BIOS d. It will return to boot menu
__________5. Where do we typically install the operating system?
a. Drive C b. DVD c. External Drive d. Floppy Drive
__________6. What key should you press if you need to go BIOS Setup Utility
a.F2 b. F4 c. F6 d. Del
__________7. usually referred to as BIOS, is software stored on a small memory chip on the
motherboard.
a.Basic Input Output System b. CMOS c. OS d. Configuration
__________8. The average speed of HDD using RPM
a.7200 b.7300 c.5405 d.2700
__________9. RPM Stands for?
a.Revolution Per Minute b. Reading Per Minute c.ReadPerMonth d.ReadOnly
__________10. It is known as dividing a space on hard drive in windows 7 installation.
a.Partitioning b. Creating c. Formatting d. None of the above
__________11. are used to test and diagnose equipment.
a.Diganostic Tools b. Hardware Tools c. Software Tool d. Defragment Tools.
__________12. is a device that can take many types of measurements. It tests the integrity of circuits
and the quality of electricity in computer components.
a.Digital Multimeter b. FDISK c. Check Disk d. Soldering Iron
__________13. also called a loopback plug, tests the basic functionality of computer ports. The adapter
is specific to the port that you want to test.
a. loopback adapter b. Digital multimeter c.toner probe d. loop adapter
__________14. This tools are containing program and application.
a.Hardware Tools b. Software Tools c. Defragment Tools d. Anti-Virus
__________15. help detect and correct disk errors, prepare a disk for data storages, and remove
unwanted files.
a.Check Disk Tools b. Disk Management Tools c. FDISK d. Storage Tools
__________16. Initializes disks, creates partitions, and formats partitions.
a.Check Disk Tools b. Disk Management Tools c. FDISK d. Storage Tools
__________17. A command-line tool that scans the operating system critical files and replaces files that
are corrupted.
a. Disk Cleanup b. System File Checker c. Defrag d. CHKDSK
__________18. Optimizes space on a hard drive to allow faster access to programs and data.
a. Disk Cleanup b. System File Checker c. Defrag d. CHKDSK
__________19. Clears space on a hard drive by searching for files that can be safely deleted.
a. Disk Cleanup b. System File Checker c. Defrag d. CHKDSK
__________20. Prepares a hard drive to store information.
a. Disk Cleanup b. System File Checker c. Defrag d. Format

II. True or False. Write “Sir Rowel” if the statement is correct and write “Sir Gonzales” if the statement
is incorrect.

________21. Gathering test information is the first step is to run the tests required by the procedures
and find out what happens.
________22. Validating the test information is the second next step is to check the data you gathered
from the tests to make sure it is correct.
________23. CMD means Command Prompt.
________24. When Windows 7 installation is finished, the boot priority should be HDD will be the first.
________25. When you find a faulty component in your computer, check it with the other computers so
that you can make sure whether the fault is in the component or not.
________26. In case of any device failure, check all the cables of your computer such as data cables,
power cable, internal circuitry cables and make sure that all these are plugged in and working fine.
________27. Check the hardware settings in the CMOS and in the device manager of the system and
make all the device drivers up to date and all the cards are plugged in properly.
________28. When you notice a software or hardware error in your computer, determine what was
changed before the problem occurred.
________29. In the event viewer, you will find the error or warning messages associated with any faulty
hardware or software.
________30. Troubleshooting is not a big learning option and we can learn a lot when we face any kind
of troubleshooting in our computer
III. ACRONYM
31. CMOS 32. BIOS
33.FAT 34. NTFS
35. VGA 36. HDMI
37. SFC 38. OS
39. RPM 40. CHS
IV- ENUMERATION
Rules in Diagnosing Computer System (41-45)
Factors Causing Computer Failures and Defects (46-49)
50. Sample Computer Error.

Vous aimerez peut-être aussi