Académique Documents
Professionnel Documents
Culture Documents
Agitator for de
35 WWTP M250LNT2M82-MPT-M-DS-2036
emulsifier dosing tank
Agitator for de
36 WWTP M250LNT2M82-MPT-M-DWG-2070-01
emulsifier dosing tank
Agitator for de
37 WWTP M250LNT2M82-MPT-E-DS-5029
emulsifier dosing tank
44 WWTP Agitator
M250LNT2M82-MPT-M-DWG-
46 WWTP 2067-01
M250LNT2M82-MPT-M-DWG-
47 WWTP 2069-01
M250LNT2M82-MPT-M-DWG-
48 WWTP 2071-01
M250LNT2M82-MPT-M-DWG-
49 WWTP 2076-01
Document Title Revision Code received Status
Skimmed Oil Transfer Pump Motor GA, Data Sheet, Motor Curves & B1 1 Approved
name Plate Drawing
DNF Feed Pump Motor GA, Data Sheet, Motor Curves & name Plate B1 1 Approved
Drawing
DNF Recycle Pump Motor GA, Data Sheet, Motor Curves & name B1 1 Approved
Plate Drawing
Treated Water Pump Motor GA, Data Sheet, Motor Curves & name B1 1 Approved
Plate Drawing
Centrifuge Feed Pump Motor GA, Data Sheet, Motor Curves & name B1 1 Approved
Plate Drawing
DNF Pressure Vessel Mechanical Datasheet A2 1 Approved
DNF Unit Internals Motor GA, Data Sheet, Motor Curves & name Plate Drawing
Coagulant Dosing Skid Mechanical Datasheet (includes Tank, Mixer and Dosing A3 1
Received Code 1 on A3 revision on
Pumps) 03.07.2019
Polymer Dosing Skid Mechanical Datasheet (includes Tank, Mixer and Dosing Pumps) A3 1
Received Code 1 on A3 revision on
03.07.2019
Polymer Dosing Agitator Motor GA, Data Sheet, Motor Curves & name Plate Drawing A3 1 24.08.2019
Oxygen Scavenger Dosing Skid Mechanical Datasheet (includes Tank, Mixer and A3 1
Received Code 1 on A3 revision on
Dosing Pumps) 03.07.2019
Reverse De-Emulsifier Dosing Skid Mechanical Datasheet (includes Tank, Mixer and A3 1
Received Code 1 on A3 revision on
Dosing Pumps) 03.07.2019
Reverse De-emulsifier Dosing Agitator GA Drawing A1 A
Received Code 1 on A1 revision on
11.07.2019
Reverse De-Emulsifier Dosing Agitator Motor GA, Data Sheet, Motor Curves & name
Plate Drawing A3 1 24.08.2019
Flash Mixer Agitator Motor GA, Data Sheet, Motor Curves & name Plate Drawing A3 1 24.08.2019
Flocculator Agitator Motor GA, Data Sheet, Motor Curves & name Plate Drawing A3 1 24.08.2019
Centrifuge Motor GA, Data Sheet, Motor Curves & name Plate Drawing A4 09.09.2019
A4 rev. Code1 received on 13.08.2019 19.06.2019 1. All Pump and motor documents received in code 1
2. Motor SO No received.
3. Base plate and mechanical seal are fabricated by Pune pumps at there vendor
B1 rev. Code1 received on 02.10.2019 19.06.2019 factory, tentative delivery date 30.09.2019(foundation bolts) , 25.10.2019(base
plate)
4. Mechanical Seal - Rolon Single M. Seal - tentative delivery date 10.10.2019
A4 rev. Code1 received on 13.08.2019 19.06.2019 5. Coupling, coupling guard, - tentative delivery date 25.10.2019
Approved
14.06.2019
Approved
14.06.2019
A3 Rev. Submitted for LTHE on 23.09.2019
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
1. Shaft materials received, IGC-E testing to be carried.
Approved
14.06.2019
2. Revised Coagulant Tank agitator GA drawing document
received from ceecons on 22.09.2019, to be submitted for LTHE
Approved review by SCTPL.
14.06.2019
3. Revised Coagulant Dosing tank agitator motor document
submitted to LTHE on 23.09.2019
3. Revised quotation received, PO and design to be confirmed
from sparkle end for procurement.
1. Shaft materials received, IGC-E testing to be carried.
2. Revised Coagulant Tank agitator GA drawing document
received from ceecons on 22.09.2019, to be submitted for LTHE
review by SCTPL.
3. Revised Coagulant Dosing tank agitator motor document
Approved submitted to LTHE on 23.09.2019
14.06.2019 3. Revised quotation received, PO and design to be confirmed
Approved from sparkle end for procurement.
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
Approved
14.06.2019
Deviation in Motor inspection level
14.06.2019
Approved
1. Motor Document A4 rev. submitted for LTHE review on
12.06.2019 09.09.2019
2. Bowl and scroll are under machining
Approved
12.06.2019 3. Base frame housing is ready
4. Gear Box assembly in progress
A4 rev. submitted for LTHE review on 09.09.2019 5. Tentative delivery by 25.10.2019
12.06.2019
6. Expecting motor delivery by 15.10.2019
Painting Deviation ; consumable deviation
12.06.2019
1. Expecting motor delivery on 17.09.2019
B1 rev. Code1 received on 02.10.2019 2. Coagulant PT (hastelloy material) will be supplied by Sparkle.
3. PT documents received, sparkle to submit for LTHE review.
B1 rev. Code1 received on 02.10.2019
1 Motor Except Centrifuge motor all other motors routine test shall be review
2 Centrifuge pump Shaft sleeve and wear ring test certificate change
10
11
Pump Name Vendor Doc.\ Drg No. Document Title Revision