Académique Documents
Professionnel Documents
Culture Documents
Concept Installer can flash (install) the concept software to approved Xperia devices. To flash your
phone, follow the steps below. Notice that all your data will be lost when flashing the concept
software so make sure to back up all data before flashing. Concept Installer cannot be used for
backup & restore purposes on the concept software so use other means of backup. Read more about
backup alternatives in the community.
Please take a few minutes to read this guide, some steps contain important information!
Note: The concept software is only intended for people that have been accepted to the concept initiative. People not part of this activity
will not have access to the feedback channels.
1. Download and install Concept Installer on your PC from the link provided separately.
Concept Installer supports Windows & Mac.
Note that Xperia phones with unlocked boot loaders are not supported and cannot be flashed.
Notice that all your data will be lost when flashing the concept software so make sure to back up all data before flashing.
1
Sony’s Android™ concept initiative
6. When the program asks you to disconnect/connect the USB, just do it. This time without
pressing volume down.
7. When phone is started after installation, the following pop up will be shown:
2
Sony’s Android™ concept initiative
Support
Feel free to contact us if you have any questions or need support. We encourage you to use the
Google+ community but to be able to look at your specific problem we need you to send an error
report by clicking the “Report Issue” in the bottom left corner. You can also contact us on
concept01@sonymobile.com