Académique Documents
Professionnel Documents
Culture Documents
M 264127
1. TECHNICAL DATA
Vout (V)
5
4
3
2
1
0
0 90 180 270 360
Basic resolution: 12 bits, i.e. The smallest output increment is 360°/4096 = 0.09°.
The smallest output increment: 5 V/4,096 = 1.22 mV.
Remark: At 180° out of a total of 360° only a maximum of
2048 measurement increments are available.
If 180° corresponds with 2.4 m (max. door width), the small-
est measurement increment: 2400 mm / 2048 = 1.2 mm.
Amendment Amd 0 Amd 1 Amd 2 Amd 3 Amd 4 Amd 5 Amd 6 Amd 7 Drafted 26.09.2006 alaeddma
KA No. 801441 Examined 16.10.2006 alaeddma
KA Date 30.11.2006 Examined against 20.10.2006 brueggbe
standard
Micro Approved 30.11.2006 alaeddma
2. VERSIONS:
Two ident. nos.: 5313823 for the L2 version and 53103850 for the C2, C4 and R2 versions
1V 1V
5V 2V 2V 5V
4V 3V 3V 4V
ID no. 53103850: direction of rotation to the ID no. 53103823: direction of rotation
right for the C2, C4 and R2 versions to the left for the L2 version
Analogue speed sensor 0-5V Microfilm date KA No. Amd Page Format Lang.
Q264127
for DO DSF 9 801441 0 2 A4 E
3. MECHANICAL DRAWING
Analogue speed sensor 0-5V Microfilm date KA No. Amd Page Format Lang.
Q264127
for DO DSF 9 801441 0 3 A4 E
4. INSTALLATION
4.1 Mechanical
2. Thread the sensor cable through the crank wheel axle and pull it out of the top side of the door
drive base plate
3. Carefully rotate sensor and cable as one and secure to the crank wheel axle.
4. Fit the cap (rotary magnet) over the sensor and ensure that the two markings line up (±30°).
1V markings
- 30° + 30°
Analogue speed sensor 0-5V Microfilm date KA No. Amd Page Format Lang.
Q264127
for DO DSF 9 801441 0 4 A4 E
4.2 Connecting Cable
Version Version
TL TR, C2 & C4
Analogue speed sensor 0-5V Microfilm date KA No. Amd Page Format Lang.
Q264127
for DO DSF 9 801441 0 5 A4 E