Académique Documents
Professionnel Documents
Culture Documents
1. You need to put the joysticks’ line plugs to cut in USB plugs,then system will recognize
steps.Please text the joysticks .Measureing joysticks are the same as using them in
WIN98.
A: You should connect the game controller with the USB interface then system will lead
to find out the “new disk and present adding new disks instructor”,for
Example picture one,button the next step,appearing the view,for example picture two.
(1) (2)
B: In picture two,button “search for the best driver for you decive”,button the
C:Knock the next step,presenting the view,for instance picture four,button “next”
measure.The the system will renovate the driver,presenting the picture five.Button the
(5)
1, Inter the dish of driver ,open the web for joystick item NO,push setup.exe install the
B:set setup.exe.
C:Install for the word,and finish.
1) 2)
3)
panel..
1) 2)
B:open the game control into the text picture three.And push properties in picture four.
3) 4)
five,text the 3D joypad.try to the machine shocks for picture six.finished text in picture
six.
5) 6)
F:Compared with picture six, all the tests are finished,knock confirmation,you have
OK,The joystick driver and text finished,you can used it all times.
NOTE:
There are several drivers in the CD. Please install the corresponding driver. If the
controller can not work properly, please un-stall the similar driver in the computer